| Message ID | 20240830215701.103262-2-marex@denx.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/3] ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2 | expand |
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 22a2a204433b5..ea933da64903c 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -191,15 +191,15 @@ sgtl5000_port: port { sgtl5000_tx_endpoint: endpoint@0 { reg = <0>; - bitclock-master = <&sgtl5000_tx_endpoint>; - frame-master = <&sgtl5000_tx_endpoint>; + bitclock-master; + frame-master; remote-endpoint = <&sai2a_endpoint>; }; sgtl5000_rx_endpoint: endpoint@1 { reg = <1>; - bitclock-master = <&sgtl5000_rx_endpoint>; - frame-master = <&sgtl5000_rx_endpoint>; + bitclock-master; + frame-master; remote-endpoint = <&sai2b_endpoint>; }; };
Switch the bitclock-master and frame-master properties from phandle to flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle in this system DT, since the phandle points to the endpoint node which contains the property itself. Simplify the DT. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: kernel@dh-electronics.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com --- arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)