| Message ID | 20240903064438.49975-1-varshini.rajendran@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for sam9x7 SoC family | expand |
On 03.09.2024 09:44, Varshini Rajendran wrote: > Add device tree file for sam9x75 curiosity board. > > Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> > --- > Changes in v7: > > - Added child nodes to the tcb node. > - Moved poweroff node to maintain alphabetic order. > --- > arch/arm/boot/dts/microchip/Makefile | 3 + > .../dts/microchip/at91-sam9x75_curiosity.dts | 324 ++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > > diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile > index 0c45c8d17468..470fe46433a9 100644 > --- a/arch/arm/boot/dts/microchip/Makefile > +++ b/arch/arm/boot/dts/microchip/Makefile > @@ -2,6 +2,7 @@ > # Enables support for device-tree overlays > DTC_FLAGS_at91-sam9x60_curiosity := -@ > DTC_FLAGS_at91-sam9x60ek := -@ > +DTC_FLAGS_at91-sam9x75_curiosity := -@ > DTC_FLAGS_at91-sama5d27_som1_ek := -@ > DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ > DTC_FLAGS_at91-sama5d29_curiosity := -@ > @@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ > dtb-$(CONFIG_SOC_SAM9X60) += \ > at91-sam9x60_curiosity.dtb \ > at91-sam9x60ek.dtb > +dtb-$(CONFIG_SOC_SAM9X7) += \ > + at91-sam9x75_curiosity.dtb > dtb-$(CONFIG_SOC_SAM_V7) += \ > at91-kizbox2-2.dtb \ > at91-kizbox3-hs.dtb \ > diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > new file mode 100644 > index 000000000000..1119f5d60d89 > --- /dev/null > +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > @@ -0,0 +1,324 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board > + * > + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries > + * > + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> > + */ > +/dts-v1/; > +#include "sam9x7.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Microchip SAM9X75 Curiosity"; > + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; > + > + aliases { > + i2c0 = &i2c6; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_key_gpio_default>; > + > + button-user { > + label = "USER"; > + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_0>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led_red: led-red { > + label = "red"; > + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_red_led_gpio_default>; > + }; > + > + led_green: led-green { > + label = "green"; > + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_green_led_gpio_default>; > + }; > + > + led_blue: led-blue { > + label = "blue"; > + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + memory@20000000 { > + reg = <0x20000000 0x10000000>; > + device_type = "memory"; > + }; > +}; > + > +&classd { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_classd_default>; > + atmel,pwm-type = "diff"; > + atmel,non-overlap-time = <10>; > + status = "okay"; > +}; > + > +&dbgu { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_dbgu_default>; > + status = "okay"; > +}; > + > +&dma0 { > + status = "okay"; > +}; > + > +&flx6 { > + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; > + status = "okay"; > +}; > + > +&i2c6 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx6_default>; > + i2c-analog-filter; > + i2c-digital-filter; > + i2c-digital-filter-width-ns = <35>; > + status = "okay"; > + > + pmic@5b { > + compatible = "microchip,mcp16502"; > + reg = <0x5b>; > + > + regulators { > + vdd_3v3: VDD_IO { > + regulator-name = "VDD_IO"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vddioddr: VDD_DDR { > + regulator-name = "VDD_DDR"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + }; > + > + vddcore: VDD_CORE { > + regulator-name = "VDD_CORE"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + dcdc4: VDD_OTHER { > + regulator-name = "VDD_OTHER"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-ramp-delay = <3125>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + > + vldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&i2s { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2s_default>; > + #sound-dai-cells = <0>; > + status = "okay"; > +}; > + > +&main_xtal { > + clock-frequency = <24000000>; > +}; > + > +&pinctrl { > + classd { > + pinctrl_classd_default: classd-default { > + atmel,pins = > + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; > + }; > + }; > + > + dbgu { > + pinctrl_dbgu_default: dbgu-default { > + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; > + }; > + }; > + > + flexcom { > + pinctrl_flx6_default: flx6-default { > + atmel,pins = > + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; > + }; > + }; > + > + gpio-keys { > + pinctrl_key_gpio_default: key-gpio-default { > + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; > + > + i2s { > + pinctrl_i2s_default: i2s-default { > + atmel,pins = > + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ > + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ > + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ > + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ > + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ > + }; > + }; > + > + leds { > + pinctrl_red_led_gpio_default: red-led-gpio-default { > + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_green_led_gpio_default: green-led-gpio-default { > + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_blue_led_gpio_default: blue-led-gpio-default { > + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; > + > + sdmmc0 { > + pinctrl_sdmmc0_default: sdmmc0-default { > + atmel,pins = > + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ > + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ > + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ > + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ > + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ > + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ > + }; > + }; > +}; /* pinctrl */ > + > +&poweroff { > + debounce-delay-us = <976>; > + status = "okay"; > + > + input@0 { > + reg = <0>; > + }; > +}; > + > +&rtt { > + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdmmc0_default>; > + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; > + disable-wp; > + status = "okay"; > +}; > + > +&slow_xtal { > + clock-frequency = <32768>; > +}; > + > +&tcb { > + timer0: timer@0 { > + compatible = "atmel,tcb-timer"; > + reg = <0>; > + }; > + > + timer1: timer@1 { > + compatible = "atmel,tcb-timer"; > + reg = <1>; > + }; > +}; > + > +&trng { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +};
Hello, Am Tue, Sep 03, 2024 at 12:14:38PM +0530 schrieb Varshini Rajendran: > Add device tree file for sam9x75 curiosity board. > > Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> > --- > Changes in v7: > > - Added child nodes to the tcb node. > - Moved poweroff node to maintain alphabetic order. > --- > arch/arm/boot/dts/microchip/Makefile | 3 + > .../dts/microchip/at91-sam9x75_curiosity.dts | 324 ++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > > diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile > index 0c45c8d17468..470fe46433a9 100644 > --- a/arch/arm/boot/dts/microchip/Makefile > +++ b/arch/arm/boot/dts/microchip/Makefile > @@ -2,6 +2,7 @@ > # Enables support for device-tree overlays > DTC_FLAGS_at91-sam9x60_curiosity := -@ > DTC_FLAGS_at91-sam9x60ek := -@ > +DTC_FLAGS_at91-sam9x75_curiosity := -@ > DTC_FLAGS_at91-sama5d27_som1_ek := -@ > DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ > DTC_FLAGS_at91-sama5d29_curiosity := -@ > @@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ > dtb-$(CONFIG_SOC_SAM9X60) += \ > at91-sam9x60_curiosity.dtb \ > at91-sam9x60ek.dtb > +dtb-$(CONFIG_SOC_SAM9X7) += \ > + at91-sam9x75_curiosity.dtb > dtb-$(CONFIG_SOC_SAM_V7) += \ > at91-kizbox2-2.dtb \ > at91-kizbox3-hs.dtb \ > diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > new file mode 100644 > index 000000000000..1119f5d60d89 > --- /dev/null > +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > @@ -0,0 +1,324 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board > + * > + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries > + * > + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> > + */ > +/dts-v1/; > +#include "sam9x7.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Microchip SAM9X75 Curiosity"; > + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; > + > + aliases { > + i2c0 = &i2c6; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_key_gpio_default>; > + > + button-user { > + label = "USER"; > + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_0>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led_red: led-red { > + label = "red"; > + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_red_led_gpio_default>; > + }; > + > + led_green: led-green { > + label = "green"; > + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_green_led_gpio_default>; > + }; > + > + led_blue: led-blue { > + label = "blue"; > + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; > + linux,default-trigger = "heartbeat"; > + }; > + }; This is an RGB LED like on other Microchip Curiosity boards, right? So three colors in a single package? What about using the "leds-group-multicolor" driver instead of adding these as separate LEDs? See Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml for reference. I tried that lately on the SAM9X60 Curiosity out of curiosity, and it's a nice interface from userspace POV. Besides: According to Documentation/devicetree/bindings/leds/common.yaml the group name should be 'led-controller' instead of 'leds'. Greets Alex > + > + memory@20000000 { > + reg = <0x20000000 0x10000000>; > + device_type = "memory"; > + }; > +}; > + > +&classd { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_classd_default>; > + atmel,pwm-type = "diff"; > + atmel,non-overlap-time = <10>; > + status = "okay"; > +}; > + > +&dbgu { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_dbgu_default>; > + status = "okay"; > +}; > + > +&dma0 { > + status = "okay"; > +}; > + > +&flx6 { > + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; > + status = "okay"; > +}; > + > +&i2c6 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx6_default>; > + i2c-analog-filter; > + i2c-digital-filter; > + i2c-digital-filter-width-ns = <35>; > + status = "okay"; > + > + pmic@5b { > + compatible = "microchip,mcp16502"; > + reg = <0x5b>; > + > + regulators { > + vdd_3v3: VDD_IO { > + regulator-name = "VDD_IO"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vddioddr: VDD_DDR { > + regulator-name = "VDD_DDR"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + }; > + > + vddcore: VDD_CORE { > + regulator-name = "VDD_CORE"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + dcdc4: VDD_OTHER { > + regulator-name = "VDD_OTHER"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-ramp-delay = <3125>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + > + vldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&i2s { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2s_default>; > + #sound-dai-cells = <0>; > + status = "okay"; > +}; > + > +&main_xtal { > + clock-frequency = <24000000>; > +}; > + > +&pinctrl { > + classd { > + pinctrl_classd_default: classd-default { > + atmel,pins = > + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; > + }; > + }; > + > + dbgu { > + pinctrl_dbgu_default: dbgu-default { > + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; > + }; > + }; > + > + flexcom { > + pinctrl_flx6_default: flx6-default { > + atmel,pins = > + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; > + }; > + }; > + > + gpio-keys { > + pinctrl_key_gpio_default: key-gpio-default { > + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; > + > + i2s { > + pinctrl_i2s_default: i2s-default { > + atmel,pins = > + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ > + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ > + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ > + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ > + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ > + }; > + }; > + > + leds { > + pinctrl_red_led_gpio_default: red-led-gpio-default { > + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_green_led_gpio_default: green-led-gpio-default { > + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_blue_led_gpio_default: blue-led-gpio-default { > + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; > + > + sdmmc0 { > + pinctrl_sdmmc0_default: sdmmc0-default { > + atmel,pins = > + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ > + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ > + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ > + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ > + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ > + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ > + }; > + }; > +}; /* pinctrl */ > + > +&poweroff { > + debounce-delay-us = <976>; > + status = "okay"; > + > + input@0 { > + reg = <0>; > + }; > +}; > + > +&rtt { > + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdmmc0_default>; > + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; > + disable-wp; > + status = "okay"; > +}; > + > +&slow_xtal { > + clock-frequency = <32768>; > +}; > + > +&tcb { > + timer0: timer@0 { > + compatible = "atmel,tcb-timer"; > + reg = <0>; > + }; > + > + timer1: timer@1 { > + compatible = "atmel,tcb-timer"; > + reg = <1>; > + }; > +}; > + > +&trng { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +}; > -- > 2.25.1 > >
Hello, forgot another comment, sorry for the second mail. See below. Am Tue, Sep 03, 2024 at 12:14:38PM +0530 schrieb Varshini Rajendran: > Add device tree file for sam9x75 curiosity board. > > Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> > --- > Changes in v7: > > - Added child nodes to the tcb node. > - Moved poweroff node to maintain alphabetic order. > --- > arch/arm/boot/dts/microchip/Makefile | 3 + > .../dts/microchip/at91-sam9x75_curiosity.dts | 324 ++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > > diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile > index 0c45c8d17468..470fe46433a9 100644 > --- a/arch/arm/boot/dts/microchip/Makefile > +++ b/arch/arm/boot/dts/microchip/Makefile > @@ -2,6 +2,7 @@ > # Enables support for device-tree overlays > DTC_FLAGS_at91-sam9x60_curiosity := -@ > DTC_FLAGS_at91-sam9x60ek := -@ > +DTC_FLAGS_at91-sam9x75_curiosity := -@ > DTC_FLAGS_at91-sama5d27_som1_ek := -@ > DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ > DTC_FLAGS_at91-sama5d29_curiosity := -@ > @@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ > dtb-$(CONFIG_SOC_SAM9X60) += \ > at91-sam9x60_curiosity.dtb \ > at91-sam9x60ek.dtb > +dtb-$(CONFIG_SOC_SAM9X7) += \ > + at91-sam9x75_curiosity.dtb > dtb-$(CONFIG_SOC_SAM_V7) += \ > at91-kizbox2-2.dtb \ > at91-kizbox3-hs.dtb \ > diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > new file mode 100644 > index 000000000000..1119f5d60d89 > --- /dev/null > +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > @@ -0,0 +1,324 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board > + * > + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries > + * > + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> > + */ > +/dts-v1/; > +#include "sam9x7.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Microchip SAM9X75 Curiosity"; > + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; > + > + aliases { > + i2c0 = &i2c6; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_key_gpio_default>; > + > + button-user { > + label = "USER"; > + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_0>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led_red: led-red { > + label = "red"; > + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_red_led_gpio_default>; > + }; > + > + led_green: led-green { > + label = "green"; > + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_green_led_gpio_default>; > + }; > + > + led_blue: led-blue { > + label = "blue"; > + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; > + linux,default-trigger = "heartbeat"; > + }; > + }; Why a seperate pinctrl for each led? You can add it to a single group, attached to the led controller (gpio-leds in this case). > + > + memory@20000000 { > + reg = <0x20000000 0x10000000>; > + device_type = "memory"; > + }; > +}; > + > +&classd { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_classd_default>; > + atmel,pwm-type = "diff"; > + atmel,non-overlap-time = <10>; > + status = "okay"; > +}; > + > +&dbgu { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_dbgu_default>; > + status = "okay"; > +}; > + > +&dma0 { > + status = "okay"; > +}; > + > +&flx6 { > + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; > + status = "okay"; > +}; > + > +&i2c6 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx6_default>; > + i2c-analog-filter; > + i2c-digital-filter; > + i2c-digital-filter-width-ns = <35>; > + status = "okay"; > + > + pmic@5b { > + compatible = "microchip,mcp16502"; > + reg = <0x5b>; > + > + regulators { > + vdd_3v3: VDD_IO { > + regulator-name = "VDD_IO"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vddioddr: VDD_DDR { > + regulator-name = "VDD_DDR"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + }; > + > + vddcore: VDD_CORE { > + regulator-name = "VDD_CORE"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + dcdc4: VDD_OTHER { > + regulator-name = "VDD_OTHER"; > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + regulator-initial-mode = <2>; > + regulator-allowed-modes = <2>, <4>; > + regulator-ramp-delay = <3125>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + regulator-mode = <4>; > + }; > + > + regulator-state-mem { > + regulator-mode = <4>; > + }; > + }; > + > + vldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + > + vldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-standby { > + regulator-on-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&i2s { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2s_default>; > + #sound-dai-cells = <0>; > + status = "okay"; > +}; > + > +&main_xtal { > + clock-frequency = <24000000>; > +}; > + > +&pinctrl { > + classd { > + pinctrl_classd_default: classd-default { > + atmel,pins = > + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; > + }; > + }; > + > + dbgu { > + pinctrl_dbgu_default: dbgu-default { > + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; > + }; > + }; > + > + flexcom { > + pinctrl_flx6_default: flx6-default { > + atmel,pins = > + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, > + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; > + }; > + }; > + > + gpio-keys { > + pinctrl_key_gpio_default: key-gpio-default { > + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; > + > + i2s { > + pinctrl_i2s_default: i2s-default { > + atmel,pins = > + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ > + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ > + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ > + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ > + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ > + }; > + }; > + > + leds { > + pinctrl_red_led_gpio_default: red-led-gpio-default { > + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_green_led_gpio_default: green-led-gpio-default { > + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + pinctrl_blue_led_gpio_default: blue-led-gpio-default { > + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; > + }; > + }; Related to above. These three can be configured together in one group. See other microchip board dts files for reference. Greets Alex > + > + sdmmc0 { > + pinctrl_sdmmc0_default: sdmmc0-default { > + atmel,pins = > + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ > + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ > + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ > + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ > + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ > + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ > + }; > + }; > +}; /* pinctrl */ > + > +&poweroff { > + debounce-delay-us = <976>; > + status = "okay"; > + > + input@0 { > + reg = <0>; > + }; > +}; > + > +&rtt { > + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdmmc0_default>; > + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; > + disable-wp; > + status = "okay"; > +}; > + > +&slow_xtal { > + clock-frequency = <32768>; > +}; > + > +&tcb { > + timer0: timer@0 { > + compatible = "atmel,tcb-timer"; > + reg = <0>; > + }; > + > + timer1: timer@1 { > + compatible = "atmel,tcb-timer"; > + reg = <1>; > + }; > +}; > + > +&trng { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +}; > -- > 2.25.1 > >
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile index 0c45c8d17468..470fe46433a9 100644 --- a/arch/arm/boot/dts/microchip/Makefile +++ b/arch/arm/boot/dts/microchip/Makefile @@ -2,6 +2,7 @@ # Enables support for device-tree overlays DTC_FLAGS_at91-sam9x60_curiosity := -@ DTC_FLAGS_at91-sam9x60ek := -@ +DTC_FLAGS_at91-sam9x75_curiosity := -@ DTC_FLAGS_at91-sama5d27_som1_ek := -@ DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ DTC_FLAGS_at91-sama5d29_curiosity := -@ @@ -60,6 +61,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ dtb-$(CONFIG_SOC_SAM9X60) += \ at91-sam9x60_curiosity.dtb \ at91-sam9x60ek.dtb +dtb-$(CONFIG_SOC_SAM9X7) += \ + at91-sam9x75_curiosity.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2-2.dtb \ at91-kizbox3-hs.dtb \ diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts new file mode 100644 index 000000000000..1119f5d60d89 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ +/dts-v1/; +#include "sam9x7.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Microchip SAM9X75 Curiosity"; + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-user { + label = "USER"; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_0>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_red: led-red { + label = "red"; + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_red_led_gpio_default>; + }; + + led_green: led-green { + label = "green"; + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_green_led_gpio_default>; + }; + + led_blue: led-blue { + label = "blue"; + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + device_type = "memory"; + }; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu_default>; + status = "okay"; +}; + +&dma0 { + status = "okay"; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c6 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vddioddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + vddcore: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + dcdc4: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-ramp-delay = <3125>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + + vldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&main_xtal { + clock-frequency = <24000000>; +}; + +&pinctrl { + classd { + pinctrl_classd_default: classd-default { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; + }; + }; + + dbgu { + pinctrl_dbgu_default: dbgu-default { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + flexcom { + pinctrl_flx6_default: flx6-default { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + gpio-keys { + pinctrl_key_gpio_default: key-gpio-default { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + i2s { + pinctrl_i2s_default: i2s-default { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ + }; + }; + + leds { + pinctrl_red_led_gpio_default: red-led-gpio-default { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_green_led_gpio_default: green-led-gpio-default { + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_blue_led_gpio_default: blue-led-gpio-default { + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0-default { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ + }; + }; +}; /* pinctrl */ + +&poweroff { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; + status = "okay"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&tcb { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&trng { + status = "okay"; +}; + +&watchdog { + status = "okay"; +};
Add device tree file for sam9x75 curiosity board. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> --- Changes in v7: - Added child nodes to the tcb node. - Moved poweroff node to maintain alphabetic order. --- arch/arm/boot/dts/microchip/Makefile | 3 + .../dts/microchip/at91-sam9x75_curiosity.dts | 324 ++++++++++++++++++ 2 files changed, 327 insertions(+) create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts