| Message ID | 20240905221020.2159230-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file | expand |
> Subject: [PATCH 1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file > > Add an overlay file to enable I3C support on the i.MX93, replacing I2C1 > with I3C. I3C is compatible with I2C, but it has not yet been enabled in > arm64's defconfig. This overlay allows users to conveniently utilize I3C > on the imx93-9x9-qsb platform until I3C and its driver become more > mature and ready for full switch to I3C. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 4 + > .../boot/dts/freescale/imx93-9x9-qsb-i3c.dtso | 73 > +++++++++++++++++++ > 2 files changed, 77 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb- > i3c.dtso > > diff --git a/arch/arm64/boot/dts/freescale/Makefile > b/arch/arm64/boot/dts/freescale/Makefile > index 9d3df8b218a2e..032f07adc0c53 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -240,6 +240,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp- > mek.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb > + > +imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo > +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb > + > dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb diff --git > a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso > b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso > new file mode 100644 > index 0000000000000..94d562fa8077d > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso > @@ -0,0 +1,73 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2022 NXP Update '2022' to '2024'. > + */ > + > +#include <dt-bindings/clock/imx93-clock.h> Drop this include. #include > +<dt-bindings/interrupt-controller/arm-gic.h> Use irq.h Regards, Peng.
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 9d3df8b218a2e..032f07adc0c53 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -240,6 +240,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb + +imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb + dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso new file mode 100644 index 0000000000000..94d562fa8077d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +#include <dt-bindings/clock/imx93-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/i3c/i3c.h> +#include <dt-bindings/usb/pd.h> + +#include "imx93-pinfunc.h" + +/dts-v1/; +/plugin/; + +&lpi2c1 { + status = "disabled"; +}; + +&i3c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c1>; + #address-cells = <3>; + #size-cells = <0>; + i2c-scl-hz = <400000>; + status = "okay"; + + tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; +}; + +&usb1_drd_sw { + remote-endpoint = <&typec1_dr_sw>; +}; + +&iomuxc { + pinctrl_i3c1: i3c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__I3C1_SCL 0x40000186 + MX93_PAD_I2C1_SDA__I3C1_SDA 0x40000186 + >; + }; +};
Add an overlay file to enable I3C support on the i.MX93, replacing I2C1 with I3C. I3C is compatible with I2C, but it has not yet been enabled in arm64's defconfig. This overlay allows users to conveniently utilize I3C on the imx93-9x9-qsb platform until I3C and its driver become more mature and ready for full switch to I3C. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 4 + .../boot/dts/freescale/imx93-9x9-qsb-i3c.dtso | 73 +++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso