| Message ID | 20240906062701.37088-26-Delphine_CC_Chiu@wiwynn.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add i2c-mux and eeprom devices for Meta Yosemite 4 | expand |
On 06/09/2024 08:26, Delphine CC Chiu wrote: > Add RTQ6056 (spider board 3rd source) support in yosemite4 DTS. > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > --- > .../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > index f73719b3c2f1..03a1e41312e3 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > @@ -1240,35 +1240,35 @@ adc@37 { > }; > > power-sensor@40 { > - compatible = "ti,ina233"; > + compatible = "ti,ina233", "richtek,rtq6056"; NAK, this does not make sense, does not match bindings and is not explained in commit msg. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index f73719b3c2f1..03a1e41312e3 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -1240,35 +1240,35 @@ adc@37 { }; power-sensor@40 { - compatible = "ti,ina233"; + compatible = "ti,ina233", "richtek,rtq6056"; reg = <0x40>; resistor-calibration = /bits/ 16 <0x0a00>; current-lsb= /bits/ 16 <0x0001>; }; power-sensor@41 { - compatible = "ti,ina233"; + compatible = "ti,ina233", "richtek,rtq6056"; reg = <0x41>; resistor-calibration = /bits/ 16 <0x0a00>; current-lsb= /bits/ 16 <0x0001>; }; power-sensor@42 { - compatible = "ti,ina233"; + compatible = "ti,ina233", "richtek,rtq6056"; reg = <0x42>; resistor-calibration = /bits/ 16 <0x0a00>; current-lsb= /bits/ 16 <0x0001>; }; power-sensor@43 { - compatible = "ti,ina233"; + compatible = "ti,ina233", "richtek,rtq6056"; reg = <0x43>; resistor-calibration = /bits/ 16 <0x0a00>; current-lsb= /bits/ 16 <0x0001>; }; power-sensor@44 { - compatible = "ti,ina233"; + compatible = "ti,ina233", "richtek,rtq6056"; reg = <0x44>; resistor-calibration = /bits/ 16 <0x0a00>; current-lsb= /bits/ 16 <0x0001>;
Add RTQ6056 (spider board 3rd source) support in yosemite4 DTS. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- .../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)