| Message ID | 20240910-meson-rst-aux-v5-4-60be62635d3e@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | reset: amlogic: move audio reset drivers out of CCF | expand |
On 10/09/2024 18:32, Jerome Brunet wrote: > To allow using the same driver for the main reset controller and the > auxiliary ones embedded in the clock controllers, allow to customise > the reset offset, same as the level offset. Also add an option to make > the level reset active low or high. > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > drivers/reset/reset-meson.c | 14 +++++++++++++- > 1 file changed, 13 insertions(+), 1 deletion(-) > > diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c > index 50bd2241ef2f..6a90613c8095 100644 > --- a/drivers/reset/reset-meson.c > +++ b/drivers/reset/reset-meson.c > @@ -18,7 +18,9 @@ > > struct meson_reset_param { > unsigned int reg_count; > + unsigned int reset_offset; > unsigned int level_offset; > + bool level_low_reset; > }; > > struct meson_reset { > @@ -46,6 +48,7 @@ static int meson_reset_reset(struct reset_controller_dev *rcdev, > unsigned int offset, bit; > > meson_reset_offset_and_bit(data, id, &offset, &bit); > + offset += data->param->reset_offset; > > return regmap_write(data->map, offset, BIT(bit)); > } > @@ -59,9 +62,10 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, > > meson_reset_offset_and_bit(data, id, &offset, &bit); > offset += data->param->level_offset; > + assert ^= data->param->level_low_reset; > > return regmap_update_bits(data->map, offset, > - BIT(bit), assert ? 0 : BIT(bit)); > + BIT(bit), assert ? BIT(bit) : 0); > } > > static int meson_reset_assert(struct reset_controller_dev *rcdev, > @@ -84,22 +88,30 @@ static const struct reset_control_ops meson_reset_ops = { > > static const struct meson_reset_param meson8b_param = { > .reg_count = 8, > + .reset_offset = 0x0, > .level_offset = 0x7c, > + .level_low_reset = true, > }; > > static const struct meson_reset_param meson_a1_param = { > .reg_count = 3, > + .reset_offset = 0x0, > .level_offset = 0x40, > + .level_low_reset = true, > }; > > static const struct meson_reset_param meson_s4_param = { > .reg_count = 6, > + .reset_offset = 0x0, > .level_offset = 0x40, > + .level_low_reset = true, > }; > > static const struct meson_reset_param t7_param = { > .reg_count = 7, > + .reset_offset = 0x0, > .level_offset = 0x40, > + .level_low_reset = true, > }; > > static const struct of_device_id meson_reset_dt_ids[] = { > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index 50bd2241ef2f..6a90613c8095 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -18,7 +18,9 @@ struct meson_reset_param { unsigned int reg_count; + unsigned int reset_offset; unsigned int level_offset; + bool level_low_reset; }; struct meson_reset { @@ -46,6 +48,7 @@ static int meson_reset_reset(struct reset_controller_dev *rcdev, unsigned int offset, bit; meson_reset_offset_and_bit(data, id, &offset, &bit); + offset += data->param->reset_offset; return regmap_write(data->map, offset, BIT(bit)); } @@ -59,9 +62,10 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, meson_reset_offset_and_bit(data, id, &offset, &bit); offset += data->param->level_offset; + assert ^= data->param->level_low_reset; return regmap_update_bits(data->map, offset, - BIT(bit), assert ? 0 : BIT(bit)); + BIT(bit), assert ? BIT(bit) : 0); } static int meson_reset_assert(struct reset_controller_dev *rcdev, @@ -84,22 +88,30 @@ static const struct reset_control_ops meson_reset_ops = { static const struct meson_reset_param meson8b_param = { .reg_count = 8, + .reset_offset = 0x0, .level_offset = 0x7c, + .level_low_reset = true, }; static const struct meson_reset_param meson_a1_param = { .reg_count = 3, + .reset_offset = 0x0, .level_offset = 0x40, + .level_low_reset = true, }; static const struct meson_reset_param meson_s4_param = { .reg_count = 6, + .reset_offset = 0x0, .level_offset = 0x40, + .level_low_reset = true, }; static const struct meson_reset_param t7_param = { .reg_count = 7, + .reset_offset = 0x0, .level_offset = 0x40, + .level_low_reset = true, }; static const struct of_device_id meson_reset_dt_ids[] = {
To allow using the same driver for the main reset controller and the auxiliary ones embedded in the clock controllers, allow to customise the reset offset, same as the level offset. Also add an option to make the level reset active low or high. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/reset/reset-meson.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)