| Message ID | 20240911071359.2971191-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dt: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO | expand |
> Subject: [PATCH 1/2] arm64: dt: imx93-tqma9352-mba93xxca: enable > Open Drain for MDIO > > From: Markus Niebel <Markus.Niebel@ew.tq-group.com> > > Follow suggestion from hardware team. This is a bit vague, my guess: The board has a pull-up resistor for MDIO pin per PHY design guide. When MDIO is idle, it needs to be high and open drain is better to be used here for power saving. Regards, Peng. > > Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > .../arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 8 > ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352- > mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352- > mba93xxca.dts > index 599df32976e24..8e939d716aac8 100644 > --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts > +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352- > mba93xxca.dts > @@ -627,8 +627,8 @@ pinctrl_eqos: eqosgrp { > fsl,pins = < > /* PD | FSEL_2 | DSE X4 */ > MX93_PAD_ENET1_MDC__ENET_QOS_MDC > 0x51e > - /* SION | HYS | FSEL_2 | DSE X4 */ > - > MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO > 0x4000111e > + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ > + > MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO > 0x4000191e > /* HYS | FSEL_0 | DSE no drive */ > > MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 > 0x1000 > > MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 > 0x1000 > @@ -659,8 +659,8 @@ pinctrl_fec: fecgrp { > fsl,pins = < > /* PD | FSEL_2 | DSE X4 */ > MX93_PAD_ENET2_MDC__ENET1_MDC > 0x51e > - /* SION | HYS | FSEL_2 | DSE X4 */ > - MX93_PAD_ENET2_MDIO__ENET1_MDIO > 0x4000111e > + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ > + MX93_PAD_ENET2_MDIO__ENET1_MDIO > 0x4000191e > /* HYS | FSEL_0 | DSE no drive */ > MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 > 0x1000 > MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 > 0x1000 > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts index 599df32976e24..8e939d716aac8 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts @@ -627,8 +627,8 @@ pinctrl_eqos: eqosgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e - /* SION | HYS | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000191e /* HYS | FSEL_0 | DSE no drive */ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000 MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000 @@ -659,8 +659,8 @@ pinctrl_fec: fecgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e - /* SION | HYS | FSEL_2 | DSE X4 */ - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000191e /* HYS | FSEL_0 | DSE no drive */ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000 MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000