| Message ID | 20240912-test-v1-3-458fa57c8ccf@analog.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Adding support of ADI ARMv8 ADSP-SC598 SoC. | expand |
On Thu, Sep 12, 2024 at 07:24:48PM +0100, Arturs Artamonovs wrote: > Bindigs for ADI ADSP-SC5xx reset controller Typo. Here and the subject. Please write complete sentences. > > Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com> > Co-developed-by: Utsav Agarwal <Utsav.Agarwal@analog.com> > Signed-off-by: Utsav Agarwal <Utsav.Agarwal@analog.com> > Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Co-developed-by: Greg Malysa <greg.malysa@timesys.com> > Signed-off-by: Greg Malysa <greg.malysa@timesys.com> > --- > .../bindings/soc/adi/adi,reset-controller.yaml | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml > new file mode 100644 > index 0000000000000000000000000000000000000000..7a6df1cfb709d818d5e3dbcd202938d6aaaaaa9b > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml > @@ -0,0 +1,38 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/adi/adi,reset-controller.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices Reset Controller for SC5XX processor family > + > +maintainers: > + - Arturs Artamonovs <arturs.artamonovs@analog.com> > + - Utsav Agarwal <Utsav.Agarwal@analog.com> > + > +description: | Don't need '|' > + SHARC and ARM core reset control unit for starting/stopping/resetting > + processors Complete sentences for top-level description. > + > +properties: > + compatible: > + enum: > + - adi,reset-controller Too generic. > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + rcu: rcu@3108c000 { > + compatible = "adi,reset-controller"; > + reg = <0x3108c000 0x1000>; > + status = "okay"; Don't need status in examples. Shouldn't a reset controller use the reset binding (i.e. #reset-cells)? All you patches seem to have similar issues, so I'm not going to comment on all of them. Please read the documentation in Documentation/devicetree/bindings/. It doesn't seem like you have. Rob
On 12/09/2024 20:24, Arturs Artamonovs via B4 Relay wrote: > From: Arturs Artamonovs <arturs.artamonovs@analog.com> > > Bindigs for ADI ADSP-SC5xx reset controller Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. For bindings, the preferred subjects are explained here: https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters It is dt-bindings: soc: adi:... if it was in soc. > > Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com> > Co-developed-by: Utsav Agarwal <Utsav.Agarwal@analog.com> > Signed-off-by: Utsav Agarwal <Utsav.Agarwal@analog.com> > Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Co-developed-by: Greg Malysa <greg.malysa@timesys.com> > Signed-off-by: Greg Malysa <greg.malysa@timesys.com> > --- > .../bindings/soc/adi/adi,reset-controller.yaml | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml Nope, don't just dump stuff to soc. This is reset controller so goes to reset. > new file mode 100644 > index 0000000000000000000000000000000000000000..7a6df1cfb709d818d5e3dbcd202938d6aaaaaa9b > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml > @@ -0,0 +1,38 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/adi/adi,reset-controller.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices Reset Controller for SC5XX processor family > + > +maintainers: > + - Arturs Artamonovs <arturs.artamonovs@analog.com> > + - Utsav Agarwal <Utsav.Agarwal@analog.com> > + > +description: | > + SHARC and ARM core reset control unit for starting/stopping/resetting > + processors > + > +properties: > + compatible: > + enum: > + - adi,reset-controller > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + rcu: rcu@3108c000 { Drop unused label. > + compatible = "adi,reset-controller"; > + reg = <0x3108c000 0x1000>; > + status = "okay"; Drop > + }; > + > Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml new file mode 100644 index 0000000000000000000000000000000000000000..7a6df1cfb709d818d5e3dbcd202938d6aaaaaa9b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/adi/adi,reset-controller.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/adi/adi,reset-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Reset Controller for SC5XX processor family + +maintainers: + - Arturs Artamonovs <arturs.artamonovs@analog.com> + - Utsav Agarwal <Utsav.Agarwal@analog.com> + +description: | + SHARC and ARM core reset control unit for starting/stopping/resetting + processors + +properties: + compatible: + enum: + - adi,reset-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rcu: rcu@3108c000 { + compatible = "adi,reset-controller"; + reg = <0x3108c000 0x1000>; + status = "okay"; + }; +