| Message ID | 20240914095213.298256-1-yanzhen@vivo.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1] spi: fix typo in the comment | expand |
Hi Yan, On Sat, Sep 14, 2024 at 05:52:13PM GMT, Yan Zhen wrote: > Correctly spelled comments make it easier for the reader to understand > the code. > > Replace 'progrom' with 'program' in the comment & > replace 'Recevie' with 'Receive' in the comment & > replace 'receieved' with 'received' in the comment & > replace 'ajacent' with 'adjacent' in the comment & > replace 'trasaction' with 'transaction' in the comment & > replace 'pecularity' with 'peculiarity' in the comment & > replace 'resiter' with 'register' in the comment & > replace 'tansmition' with 'transmission' in the comment & > replace 'Deufult' with 'Default' in the comment & > replace 'tansfer' with 'transfer' in the comment & > replace 'settign' with 'setting' in the comment. > > For what it matters, there are two blank lines here. > Signed-off-by: Yan Zhen <yanzhen@vivo.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Thanks, Andi
On Sat, 14 Sep 2024 17:52:13 +0800, Yan Zhen wrote: > Correctly spelled comments make it easier for the reader to understand > the code. > > Replace 'progrom' with 'program' in the comment & > replace 'Recevie' with 'Receive' in the comment & > replace 'receieved' with 'received' in the comment & > replace 'ajacent' with 'adjacent' in the comment & > replace 'trasaction' with 'transaction' in the comment & > replace 'pecularity' with 'peculiarity' in the comment & > replace 'resiter' with 'register' in the comment & > replace 'tansmition' with 'transmission' in the comment & > replace 'Deufult' with 'Default' in the comment & > replace 'tansfer' with 'transfer' in the comment & > replace 'settign' with 'setting' in the comment. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: fix typo in the comment commit: 89980d3a34655d99c599f6acf877fd48775a29ad All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index 1301d14483d4..b2af2eed197f 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -40,7 +40,7 @@ /* Common definition of interrupt bit masks */ #define HISI_SFC_V3XX_INT_MASK_ALL (0x1ff) /* all the masks */ #define HISI_SFC_V3XX_INT_MASK_CPLT BIT(0) /* command execution complete */ -#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2) /* page progrom error */ +#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2) /* page program error */ #define HISI_SFC_V3XX_INT_MASK_IACCES BIT(5) /* error visiting inaccessible/ * protected address */ diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c index 18a46569ba46..a1eb7f296f55 100644 --- a/drivers/spi/spi-lantiq-ssc.c +++ b/drivers/spi/spi-lantiq-ssc.c @@ -139,7 +139,7 @@ #define LTQ_SPI_FGPO_CLROUTN_S 0 #define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ -#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ +#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Receive to-do value */ #define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ #define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c index 28f06122edac..3bbeb8d5bfb8 100644 --- a/drivers/spi/spi-mpc52xx-psc.c +++ b/drivers/spi/spi-mpc52xx-psc.c @@ -107,7 +107,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, struct mpc52xx_psc_spi *mps = spi_controller_get_devdata(spi->controller); struct mpc52xx_psc __iomem *psc = mps->psc; struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; - unsigned rb = 0; /* number of bytes receieved */ + unsigned rb = 0; /* number of bytes received */ unsigned sb = 0; /* number of bytes sent */ unsigned char *rx_buf = (unsigned char *)t->rx_buf; unsigned char *tx_buf = (unsigned char *)t->tx_buf; @@ -325,7 +325,7 @@ static int mpc52xx_psc_spi_of_probe(struct platform_device *pdev) if (IS_ERR(mps->psc)) return dev_err_probe(dev, PTR_ERR(mps->psc), "could not ioremap I/O port range\n"); - /* On the 5200, fifo regs are immediately ajacent to the psc regs */ + /* On the 5200, fifo regs are immediately adjacent to the psc regs */ mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc); mps->irq = platform_get_irq(pdev, 0); diff --git a/drivers/spi/spi-pic32-sqi.c b/drivers/spi/spi-pic32-sqi.c index 0031063a7e25..762b1c5c6f75 100644 --- a/drivers/spi/spi-pic32-sqi.c +++ b/drivers/spi/spi-pic32-sqi.c @@ -226,7 +226,7 @@ static irqreturn_t pic32_sqi_isr(int irq, void *dev_id) if (status & PESQI_PKTCOMP) { /* mask all interrupts */ enable = 0; - /* complete trasaction */ + /* complete transaction */ complete(&sqi->xfer_done); } diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index de63cf0557ce..dd87cf4f70dd 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -899,7 +899,7 @@ static int configure_dma(struct pl022 *pl022) break; } - /* SPI pecularity: we need to read and write the same width */ + /* SPI peculiarity: we need to read and write the same width */ if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) rx_conf.src_addr_width = tx_conf.dst_addr_width; if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) diff --git a/drivers/spi/spi-rockchip-sfc.c b/drivers/spi/spi-rockchip-sfc.c index 0d7fadcd4ed3..04b9377a2802 100644 --- a/drivers/spi/spi-rockchip-sfc.c +++ b/drivers/spi/spi-rockchip-sfc.c @@ -111,7 +111,7 @@ #define SFC_VER_4 0x4 #define SFC_VER_5 0x5 -/* Delay line controller resiter */ +/* Delay line controller register */ #define SFC_DLL_CTRL0 0x3C #define SFC_DLL_CTRL0_SCLK_SMP_DLL BIT(15) #define SFC_DLL_CTRL0_DLL_MAX_VER4 0xFFU diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 0bb33c43b1b4..f1e0c16e8136 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -192,7 +192,7 @@ struct rockchip_spi { u8 rsd; bool target_abort; - bool cs_inactive; /* spi target tansmition stop when cs inactive */ + bool cs_inactive; /* spi target transmission stop when cs inactive */ bool cs_high_supported; /* native CS supports active-high polarity */ struct spi_transfer *xfer; /* Store xfer temporarily */ diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 51a002b3f518..2771fe1397e4 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1353,7 +1353,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - /* Setup Deufult Mode */ + /* Setup Default Mode */ s3c64xx_spi_hwinit(sdd); spin_lock_init(&sdd->lock); diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index 831ebae10fe0..233ebfb8df5e 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -728,7 +728,7 @@ static int sprd_spi_setup_transfer(struct spi_device *sdev, if (ret) return ret; - /* Set tansfer speed and valid bits */ + /* Set transfer speed and valid bits */ sprd_spi_set_speed(ss, t->speed_hz); sprd_spi_set_transfer_bits(ss, bits_per_word); diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index ed1393d159ae..04838b036e24 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -542,7 +542,7 @@ static int tegra_slink_start_dma_based_transfer( if (tspi->is_packed) { val |= SLINK_PACKED; tegra_slink_writel(tspi, val, SLINK_DMA_CTL); - /* HW need small delay after settign Packed mode */ + /* HW need small delay after setting Packed mode */ udelay(1); } tspi->dma_control_reg = val;
Correctly spelled comments make it easier for the reader to understand the code. Replace 'progrom' with 'program' in the comment & replace 'Recevie' with 'Receive' in the comment & replace 'receieved' with 'received' in the comment & replace 'ajacent' with 'adjacent' in the comment & replace 'trasaction' with 'transaction' in the comment & replace 'pecularity' with 'peculiarity' in the comment & replace 'resiter' with 'register' in the comment & replace 'tansmition' with 'transmission' in the comment & replace 'Deufult' with 'Default' in the comment & replace 'tansfer' with 'transfer' in the comment & replace 'settign' with 'setting' in the comment. Signed-off-by: Yan Zhen <yanzhen@vivo.com> --- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-lantiq-ssc.c | 2 +- drivers/spi/spi-mpc52xx-psc.c | 4 ++-- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pl022.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 2 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sprd.c | 2 +- drivers/spi/spi-tegra20-slink.c | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-)