diff mbox series

[v3,1/2] arm64: dts: ti: k3-j784s4-evm: Mark tps659413 regulators as bootph-all

Message ID 20240916-j784s4-tps6594-bootph-v3-1-ab70da0de7bd@redhat.com (mailing list archive)
State New
Headers show
Series arm64: dts: ti: k3-j784s4: Mark tps659413 regulators as bootph-all | expand

Commit Message

Andrew Halaney Sept. 16, 2024, 5:14 p.m. UTC
In order for the MCU domain to access this PMIC, a regulator
needs to be marked appropriately otherwise it is not seen by SPL and
therefore not configured.

This is necessary if the MCU domain is to program the TPS6594 MCU ESM
state machine, which is required to wire up the watchdog in a manner
that will reset the board.

Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 6695ebbcb4d0..87b5b9b11e96 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -668,6 +668,7 @@  bucka12: buck12 {
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka3: buck3 {
@@ -676,6 +677,7 @@  bucka3: buck3 {
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka4: buck4 {
@@ -684,6 +686,7 @@  bucka4: buck4 {
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka5: buck5 {
@@ -692,6 +695,7 @@  bucka5: buck5 {
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa1: ldo1 {
@@ -700,6 +704,7 @@  ldoa1: ldo1 {
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa2: ldo2 {
@@ -708,6 +713,7 @@  ldoa2: ldo2 {
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa3: ldo3 {
@@ -716,6 +722,7 @@  ldoa3: ldo3 {
 				regulator-max-microvolt = <800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa4: ldo4 {
@@ -724,6 +731,7 @@  ldoa4: ldo4 {
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 		};
 	};