@@ -1,6 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_MACH_MESON6) += \
- meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb \
meson8b-ec100.dtb \
deleted file mode 100644
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-/dts-v1/;
-#include "meson6.dtsi"
-
-/ {
- model = "Geniatech ATV1200";
- compatible = "geniatech,atv1200", "amlogic,meson6";
-
- aliases {
- serial0 = &uart_AO;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x80000000>;
- };
-};
-
-&uart_AO {
- status = "okay";
-};
-
-ðmac {
- status = "okay";
-};
deleted file mode 100644
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include "meson.dtsi"
-
-/ {
- model = "Amlogic Meson6 SoC";
- compatible = "amlogic,meson6";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x200>;
- };
-
- cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x201>;
- };
- };
-
- apb2: bus@d0000000 {
- compatible = "simple-bus";
- reg = <0xd0000000 0x40000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xd0000000 0x40000>;
- };
-
- clk81: clk81 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- };
-}; /* end of / */
-
-&efuse {
- status = "disabled";
-};
-
-&timer_abcde {
- clocks = <&xtal>, <&clk81>;
- clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
- clocks = <&xtal>, <&clk81>, <&clk81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
- clocks = <&xtal>, <&clk81>, <&clk81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
- clocks = <&xtal>, <&clk81>, <&clk81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
- clocks = <&xtal>, <&clk81>, <&clk81>;
- clock-names = "xtal", "pclk", "baud";
-};
The meson6 atv1200 has a lot of dtbs check errors, but since no active contributor have any boards with Meson6 SoC, plus no upstream GPIO, pinctrl, clock, MMC... for that SoC either, let's start decommissioning Meson6 support by removing the Device Tree files first then remove the MACH_MESON6 in a second time. If someone is interested in Meson6 support they should bring it back along with a few more patches for upstream support of further peripherals. Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- arch/arm/boot/dts/amlogic/Makefile | 2 - arch/arm/boot/dts/amlogic/meson6-atv1200.dts | 33 ------------- arch/arm/boot/dts/amlogic/meson6.dtsi | 73 ---------------------------- 3 files changed, 108 deletions(-)