diff mbox series

[v2] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1

Message ID 20240918-dts-aspeed-system1-peci-snoop-v2-1-2d4d17403670@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1 | expand

Commit Message

Manojkiran Eda via B4 Relay Sept. 18, 2024, 9:20 a.m. UTC 
From: Manojkiran Eda <manojkiran.eda@gmail.com>

This patch enables the PECI interface and configures the LPC Snoop for
ports 0x80 and 0x81 in the ASPEED BMC for IBM System1.

Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
---
This patch enables PECI and LPC snoop functionality on the IBM System1
BMC in the device tree.

The following changes have been made:

1. Enabled the PECI controller (peci0) by marking its status to "okay".
2. Enabled the LPC snoop engine, configuring snoop ports at 0x80 and
   0x81.

These changes are required to support PECI communication and LPC
snooping for system monitoring and debugging purposes.

To: Ninad Palsule <ninad@linux.ibm.com>
To: Joel Stanley <joel@jms.id.au>
To: Andrew Jeffery <andrew@codeconstruct.com.au>
To: openbmc@lists.ozlabs.org
To: Eddie James <eajames@linux.ibm.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org

Changes in v2:
- Added ibm system1 in the subject & added upstream mailing
  list as well for reviews.
- Link to v1: https://lore.kernel.org/r/20240917-dts-aspeed-system1-peci-snoop-v1-1-b967fb3a6735@gmail.com
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts | 9 +++++++++
 1 file changed, 9 insertions(+)


---
base-commit: ca2478a7d974f38d29d27acb42a952c7f168916e
change-id: 20240917-dts-aspeed-system1-peci-snoop-725c70f4a485

Best regards,

Comments

Andrew Jeffery Sept. 19, 2024, 1:45 a.m. UTC | #1 
On Wed, 18 Sep 2024 14:50:03 +0530, Manojkiran Eda wrote:
> This patch enables the PECI interface and configures the LPC Snoop for
> ports 0x80 and 0x81 in the ASPEED BMC for IBM System1.
> 
> 

Thanks, I've applied this to be picked up through the BMC tree.

[1/1] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1
      commit: abfafb7269c3c1d73a2a7136f9d3f7e417c83a4c

--
Andrew Jeffery <andrew@codeconstruct.com.au>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index cb3063413d1f..738a86c787c0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -464,6 +464,15 @@  &kcs3 {
 	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
 
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
 &i2c0 {
 	status = "okay";