diff mbox series

[9/9] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support

Message ID 20240919-pcie_ep_range-v1-9-b3e9d62780b7@nxp.com (mailing list archive)
State New, archived
Headers show
Series PCI-EP: Add 'ranges' support for PCI endpoint devices | expand

Commit Message

Frank Li Sept. 19, 2024, 10:03 p.m. UTC 
Add support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On i.MX8Q platforms, the PCI bus addresses differ from the
CPU addresses. The DesignWare (DWC) driver already handles this in the
common code by using the 'ranges' property in the Device Tree (DT) file.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index bdc2b372e6c13..1e58c24137e7f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -70,6 +70,7 @@  enum imx_pcie_variants {
 	IMX8MQ_EP,
 	IMX8MM_EP,
 	IMX8MP_EP,
+	IMX8Q_EP,
 	IMX95_EP,
 };
 
@@ -1079,6 +1080,16 @@  static const struct pci_epc_features imx8m_pcie_epc_features = {
 	.align = SZ_64K,
 };
 
+static const struct pci_epc_features imx8q_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
+	.bar[BAR_5] = { .type = BAR_RESERVED, },
+	.align = SZ_64K,
+};
+
 /*
  * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
  * ================================================================================================
@@ -1645,6 +1656,14 @@  static const struct imx_pcie_drvdata drvdata[] = {
 		.epc_features = &imx8m_pcie_epc_features,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
+	[IMX8Q_EP] = {
+		.variant = IMX8Q_EP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
+		.mode = DW_PCIE_EP_TYPE,
+		.epc_features = &imx8q_pcie_epc_features,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95_EP] = {
 		.variant = IMX95_EP,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
@@ -1674,6 +1693,7 @@  static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
 	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{ .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], },
 	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
 	{},
 };