diff mbox series

[2/3] PCI: dwc: Using for_each_of_range_untranslate to elminate cpu_addr_fixup()

Message ID 20240924-pci_fixup_addr-v1-2-57d14a91ec4f@nxp.com (mailing list archive)
State New
Headers show
Series PCI: dwc: opitimaze RC host pci_fixup_addr() | expand

Commit Message

Frank Li Sept. 24, 2024, 9:54 p.m. UTC
for_each_of_range_untranslate() can get address informaiton just ahead of
PCIe controller. Most system it is the same as CPU address, but some
hardware like i.MX8QXP convert it to difference address by bus fabric. See
below diagram:

                ┌─────────┐                    ┌────────────┐
     ┌─────┐    │         │ IA: 0x8ff0_0000    │            │
     │ CPU ├───►│ BUS     ├─────────────────┐  │ PCI        │
     └─────┘    │         │ IA: 0x8ff8_0000 │  │            │
      CPU Addr  │ Fabric  ├─────────────┐   │  │ Controller │
    0x7000_0000 │         │             │   │  │            │
                │         │             │   │  │            │   PCI Addr
                │         │             │   └──► CfgSpace  ─┼────────────►
                │         ├─────────┐   │      │            │    0
                │         │         │   │      │            │
                └─────────┘         │   └──────► IOSpace   ─┼────────────►
                                    │          │            │    0
                                    │          │            │
                                    └──────────► MemSpace  ─┼────────────►
                            IA: 0x8000_0000    │            │  0x8000_0000
                                               └────────────┘

bus@5f000000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
		 <0x80000000 0x0 0x70000000 0x10000000>;

	pcie@5f010000 {
		compatible = "fsl,imx8q-pcie";
		reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
		reg-names = "dbi", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x00 0xff>;
		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
	...
	};
};

Term 'IA' here means the address just before PCIe controle. After ATU use
this IA instead CPU address, cpu_addr_fixup() can be removed.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 33 +++++++++++++++++++++++
 1 file changed, 33 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 3e41865c72904..68c679a2e1737 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -418,6 +418,27 @@  static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp)
 	}
 }
 
+static int dw_pcie_get_untranslate_addr(struct device_node *np, resource_size_t pci_addr,
+					resource_size_t *i_addr)
+{
+	struct of_range_parser parser;
+	struct of_range range;
+	int ret;
+
+	ret = of_range_parser_init(&parser, np);
+	if (ret)
+		return ret;
+
+	for_each_of_pci_range_untranslate(&parser, &range) {
+		if (pci_addr == range.bus_addr) {
+			*i_addr = range.cpu_addr;
+			break;
+		}
+	}
+
+	return 0;
+}
+
 int dw_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -427,6 +448,7 @@  int dw_pcie_host_init(struct dw_pcie_rp *pp)
 	struct resource_entry *win;
 	struct pci_host_bridge *bridge;
 	struct resource *res;
+	int index;
 	int ret;
 
 	raw_spin_lock_init(&pp->lock);
@@ -440,6 +462,11 @@  int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->cfg0_size = resource_size(res);
 		pp->cfg0_base = res->start;
 
+		index = of_property_match_string(np, "reg-names", "config");
+		if (index < 0)
+			return -EINVAL;
+		of_property_read_reg(np, index, &pp->cfg0_base, NULL);
+
 		pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
 		if (IS_ERR(pp->va_cfg0_base))
 			return PTR_ERR(pp->va_cfg0_base);
@@ -462,6 +489,9 @@  int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->io_base = pci_pio_to_address(win->res->start);
 	}
 
+	if (dw_pcie_get_untranslate_addr(np, pp->io_bus_addr, &pp->io_base))
+		return -ENODEV;
+
 	/* Set default bus ops */
 	bridge->ops = &dw_pcie_ops;
 	bridge->child_ops = &dw_child_pcie_ops;
@@ -733,6 +763,9 @@  static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 		atu.cpu_addr = entry->res->start;
 		atu.pci_addr = entry->res->start - entry->offset;
 
+		if (dw_pcie_get_untranslate_addr(pci->dev->of_node, atu.pci_addr, &atu.cpu_addr))
+			return -EINVAL;
+
 		/* Adjust iATU size if MSG TLP region was allocated before */
 		if (pp->msg_res && pp->msg_res->parent == entry->res)
 			atu.size = resource_size(entry->res) -