diff mbox series

[v1] input: Fix typos in comments across various files

Message ID 20240926031457.3479350-1-yujiaoliang@vivo.com (mailing list archive)
State New, archived
Headers show
Series [v1] input: Fix typos in comments across various files | expand

Commit Message

Yu Jiaoliang Sept. 26, 2024, 3:14 a.m. UTC
This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.

Detected using codespell.

Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
---
 drivers/input/touchscreen/auo-pixcir-ts.c | 2 +-
 drivers/input/touchscreen/bcm_iproc_tsc.c | 2 +-
 drivers/input/touchscreen/edt-ft5x06.c    | 2 +-
 drivers/input/touchscreen/ili210x.c       | 2 +-
 drivers/input/touchscreen/pixcir_i2c_ts.c | 2 +-
 drivers/input/touchscreen/rohm_bu21023.c  | 4 ++--
 drivers/input/touchscreen/stmpe-ts.c      | 4 ++--
 drivers/input/touchscreen/wm97xx-core.c   | 4 ++--
 8 files changed, 11 insertions(+), 11 deletions(-)

Comments

Oliver Graute Sept. 26, 2024, 7:46 a.m. UTC | #1
On 26/09/24, Yu Jiaoliang wrote:
> This commit fixes several typographical errors in comments within
> the driver/input directory. No functional changes are made.
> 
> Detected using codespell.
> 
> Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>

Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Dmitry Torokhov Sept. 30, 2024, 2:58 p.m. UTC | #2
On Thu, Sep 26, 2024 at 11:14:43AM +0800, Yu Jiaoliang wrote:
> This commit fixes several typographical errors in comments within
> the driver/input directory. No functional changes are made.
> 
> Detected using codespell.
> 
> Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index 8db2a112a476..363a4a1f1560 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -72,7 +72,7 @@ 
 
 /*
  * Interrupt modes:
- * periodical:		interrupt is asserted periodicaly
+ * periodical:		interrupt is asserted periodically
  * compare coordinates:	interrupt is asserted when coordinates change
  * indicate touch:	interrupt is asserted during touch
  */
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
index 9c84235327bf..e49bde50d77a 100644
--- a/drivers/input/touchscreen/bcm_iproc_tsc.c
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -217,7 +217,7 @@  static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 			"pen up-down (%d)\n", priv->pen_status);
 	}
 
-	/* coordinates in FIFO exceed the theshold */
+	/* coordinates in FIFO exceed the threshold */
 	if (intr_status & TS_FIFO_INTR_MASK) {
 		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
 			regmap_read(priv->regmap, FIFO_DATA, &raw_coordinate);
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index e70415f189a5..8c77e9f347c5 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -1219,7 +1219,7 @@  static int edt_ft5x06_ts_probe(struct i2c_client *client)
 	}
 
 	/*
-	 * Check which sleep modes we can support. Power-off requieres the
+	 * Check which sleep modes we can support. Power-off requires the
 	 * reset-pin to ensure correct power-down/power-up behaviour. Start with
 	 * the EDT_PMODE_POWEROFF test since this is the deepest possible sleep
 	 * mode.
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 4573844c3395..a8ecd0f980cb 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -898,7 +898,7 @@  static umode_t ili210x_attributes_visible(struct kobject *kobj,
 	if (attr == &dev_attr_calibrate.attr)
 		return priv->chip->has_calibrate_reg ? attr->mode : 0;
 
-	/* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */
+	/* Firmware/Kernel/Protocol/BootMode is implemented only for ILI251x */
 	if (!priv->chip->has_firmware_proto)
 		return 0;
 
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4ede0687beb0..1ea0b12b2635 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -44,7 +44,7 @@  enum pixcir_power_mode {
 
 /*
  * Interrupt modes:
- * periodical: interrupt is asserted periodicaly
+ * periodical: interrupt is asserted periodically
  * diff coordinates: interrupt is asserted when coordinates change
  * level on touch: interrupt level asserted during touch
  * pulse on touch: interrupt pulse asserted during touch
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
index 0e5cc9fbad17..295d8d75ba32 100644
--- a/drivers/input/touchscreen/rohm_bu21023.c
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -388,13 +388,13 @@  static int rohm_ts_manual_calibration(struct rohm_ts_data *ts)
 			err_y = (int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
 				READ_CALIB_BUF(PRM1_Y_L);
 
-			/* X axis ajust */
+			/* X axis adjust */
 			if (err_x <= 4)
 				calib_x -= AXIS_ADJUST;
 			else if (err_x >= 60)
 				calib_x += AXIS_ADJUST;
 
-			/* Y axis ajust */
+			/* Y axis adjust */
 			if (err_y <= 4)
 				calib_y -= AXIS_ADJUST;
 			else if (err_y >= 60)
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index b204fdb2d22c..2228842dfb49 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -107,7 +107,7 @@  static void stmpe_work(struct work_struct *work)
 
 	/*
 	 * touch_det sometimes get desasserted or just get stuck. This appears
-	 * to be a silicon bug, We still have to clearify this with the
+	 * to be a silicon bug, We still have to clarify this with the
 	 * manufacture. As a workaround We release the key anyway if the
 	 * touch_det keeps coming in after 4ms, while the FIFO contains no value
 	 * during the whole time.
@@ -140,7 +140,7 @@  static irqreturn_t stmpe_ts_handler(int irq, void *data)
 
 	/*
 	 * The FIFO sometimes just crashes and stops generating interrupts. This
-	 * appears to be a silicon bug. We still have to clearify this with
+	 * appears to be a silicon bug. We still have to clarify this with
 	 * the manufacture. As a workaround we disable the TSC while we are
 	 * collecting data and flush the FIFO after reading
 	 */
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index f01f6cc9b59f..91384ad1aa40 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -222,7 +222,7 @@  EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
 
 /*
  * Codec GPIO pin configuration, this sets pin direction, polarity,
- * stickyness and wake up.
+ * stickiness and wake up.
  */
 void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
 		   enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
@@ -403,7 +403,7 @@  static int wm97xx_read_samples(struct wm97xx *wm)
 			* is actively working with the touchscreen we
 			* don't want to lose the quick response. So we
 			* will slowly increase sleep time after the
-			* pen is up and quicky restore it to ~one task
+			* pen is up and quickly restore it to ~one task
 			* switch when pen is down again.
 			*/
 			if (wm->ts_reader_interval < HZ / 10)