@@ -15,7 +15,6 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_of.h>
-#include <drm/drm_panel.h>
#define LDB_CTRL_CH0_ENABLE BIT(0)
#define LDB_CTRL_CH0_DI_SELECT BIT(1)
@@ -86,7 +85,7 @@ static const struct fsl_ldb_devdata fsl_ldb_devdata[] = {
struct fsl_ldb {
struct device *dev;
struct drm_bridge bridge;
- struct drm_bridge *panel_bridge;
+ struct drm_bridge *next_bridge;
struct clk *clk;
struct regmap *regmap;
const struct fsl_ldb_devdata *devdata;
@@ -117,7 +116,7 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
{
struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
- return drm_bridge_attach(bridge->encoder, fsl_ldb->panel_bridge,
+ return drm_bridge_attach(bridge->encoder, fsl_ldb->next_bridge,
bridge, flags);
}
@@ -292,9 +291,7 @@ static const struct drm_bridge_funcs funcs = {
static int fsl_ldb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *panel_node;
struct device_node *remote1, *remote2;
- struct drm_panel *panel;
struct fsl_ldb *fsl_ldb;
int dual_link;
@@ -318,33 +315,27 @@ static int fsl_ldb_probe(struct platform_device *pdev)
if (IS_ERR(fsl_ldb->regmap))
return PTR_ERR(fsl_ldb->regmap);
- /* Locate the remote ports and the panel node */
+ /* Locate the remote ports. */
remote1 = of_graph_get_remote_node(dev->of_node, 1, 0);
remote2 = of_graph_get_remote_node(dev->of_node, 2, 0);
fsl_ldb->ch0_enabled = (remote1 != NULL);
fsl_ldb->ch1_enabled = (remote2 != NULL);
- panel_node = of_node_get(remote1 ? remote1 : remote2);
of_node_put(remote1);
of_node_put(remote2);
- if (!fsl_ldb->ch0_enabled && !fsl_ldb->ch1_enabled) {
- of_node_put(panel_node);
- return dev_err_probe(dev, -ENXIO, "No panel node found");
- }
+ if (!fsl_ldb->ch0_enabled && !fsl_ldb->ch1_enabled)
+ return dev_err_probe(dev, -ENXIO, "No next bridge node found");
dev_dbg(dev, "Using %s\n",
fsl_ldb_is_dual(fsl_ldb) ? "dual-link mode" :
fsl_ldb->ch0_enabled ? "channel 0" : "channel 1");
- panel = of_drm_find_panel(panel_node);
- of_node_put(panel_node);
- if (IS_ERR(panel))
- return PTR_ERR(panel);
-
- fsl_ldb->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
- if (IS_ERR(fsl_ldb->panel_bridge))
- return PTR_ERR(fsl_ldb->panel_bridge);
-
+ fsl_ldb->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node,
+ fsl_ldb->ch0_enabled ? 1 : 2,
+ 0);
+ if (IS_ERR(fsl_ldb->next_bridge))
+ return dev_err_probe(dev, PTR_ERR(fsl_ldb->next_bridge),
+ "failed to get next bridge\n");
if (fsl_ldb_is_dual(fsl_ldb)) {
struct device_node *port1, *port2;
The next bridge in bridge chain could be a panel bridge or a non-panel bridge. Use devm_drm_of_get_bridge() to replace the combination function calls of of_drm_find_panel() and devm_drm_panel_bridge_add() to get either a panel bridge or a non-panel bridge, instead of getting a panel bridge only. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- drivers/gpu/drm/bridge/fsl-ldb.c | 31 +++++++++++-------------------- 1 file changed, 11 insertions(+), 20 deletions(-)