| Message ID | 20240930070500.3174431-3-Delphine_CC_Chiu@wiwynn.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add I2C mux devices for yosemite4 | expand |
On Mon, 2024-09-30 at 15:04 +0800, Delphine CC Chiu wrote: > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > Add i2c-mux on Spider board for four NICs and add the temperature sensor > and EEPROM for the NICs. > > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > --- > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 ++++++++++++++++++- > 1 file changed, 72 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > index dbc992a625b7..b813140b3c5b 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > @@ -26,6 +26,10 @@ aliases { > i2c21 = &imux21; > i2c22 = &imux22; > i2c23 = &imux23; > + i2c24 = &imux24; > + i2c25 = &imux25; > + i2c26 = &imux26; > + i2c27 = &imux27; > i2c34 = &imux34; > i2c35 = &imux35; > }; > @@ -1196,8 +1200,9 @@ adc@35 { > }; > > &i2c15 { > + #address-cells = <1>; > + #size-cells = <0>; > status = "okay"; > - mctp-controller; Why are you deleting this if you're not also deleting the MCTP endpoint node? Unless there's some reason this is related to the NICs, this should be its own patch with its own justification. Andrew
> -----Original Message----- > From: Andrew Jeffery <andrew@codeconstruct.com.au> > Sent: Tuesday, October 1, 2024 8:37 AM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; Rob Herring <robh@kernel.org>; Krzysztof Kozlowski > <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Joel Stanley > <joel@jms.id.au> > Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four > NICs > > [External Sender] > > [External Sender] > > On Mon, 2024-09-30 at 15:04 +0800, Delphine CC Chiu wrote: > > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > > > Add i2c-mux on Spider board for four NICs and add the temperature > > sensor and EEPROM for the NICs. > > > > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > > --- > > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 > > ++++++++++++++++++- > > 1 file changed, 72 insertions(+), 3 deletions(-) > > > > diff --git > > a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > index dbc992a625b7..b813140b3c5b 100644 > > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > @@ -26,6 +26,10 @@ aliases { > > i2c21 = &imux21; > > i2c22 = &imux22; > > i2c23 = &imux23; > > + i2c24 = &imux24; > > + i2c25 = &imux25; > > + i2c26 = &imux26; > > + i2c27 = &imux27; > > i2c34 = &imux34; > > i2c35 = &imux35; > > }; > > @@ -1196,8 +1200,9 @@ adc@35 { > > }; > > > > &i2c15 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > status = "okay"; > > - mctp-controller; > > Why are you deleting this if you're not also deleting the MCTP endpoint node? > > Unless there's some reason this is related to the NICs, this should be its own > patch with its own justification. > > Andrew Hi Andrew, We have discussed with Jeremy from Code Construct about removing the mctp-controller on bus 15 before. He thought it would be better to add the mctp-controller on each i2c mux port so the MCTP driver would ensure that the mux was configured properly before communicating with the device. I'll split a patch to remove the mctp-controller on bus 15 in next serial of patches. Regards, Ricky
On Tue, 2024-10-01 at 07:52 +0000, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > > > -----Original Message----- > > From: Andrew Jeffery <andrew@codeconstruct.com.au> > > Sent: Tuesday, October 1, 2024 8:37 AM > > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > > patrick@stwcx.xyz; Rob Herring <robh@kernel.org>; Krzysztof Kozlowski > > <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Joel Stanley > > <joel@jms.id.au> > > Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>; > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org > > Subject: Re: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four > > NICs > > > > [External Sender] > > > > [External Sender] > > > > On Mon, 2024-09-30 at 15:04 +0800, Delphine CC Chiu wrote: > > > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > > > > > Add i2c-mux on Spider board for four NICs and add the temperature > > > sensor and EEPROM for the NICs. > > > > > > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > > > --- > > > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 > > > ++++++++++++++++++- > > > 1 file changed, 72 insertions(+), 3 deletions(-) > > > > > > diff --git > > > a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > index dbc992a625b7..b813140b3c5b 100644 > > > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > @@ -26,6 +26,10 @@ aliases { > > > i2c21 = &imux21; > > > i2c22 = &imux22; > > > i2c23 = &imux23; > > > + i2c24 = &imux24; > > > + i2c25 = &imux25; > > > + i2c26 = &imux26; > > > + i2c27 = &imux27; > > > i2c34 = &imux34; > > > i2c35 = &imux35; > > > }; > > > @@ -1196,8 +1200,9 @@ adc@35 { > > > }; > > > > > > &i2c15 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > status = "okay"; > > > - mctp-controller; > > > > Why are you deleting this if you're not also deleting the MCTP endpoint node? > > > > Unless there's some reason this is related to the NICs, this should be its own > > patch with its own justification. > > > > Andrew > Hi Andrew, > > We have discussed with Jeremy from Code Construct about removing the > mctp-controller on bus 15 before. > > He thought it would be better to add the mctp-controller on each i2c mux port > so the MCTP driver would ensure that the mux was configured properly before > communicating with the device. > > I'll split a patch to remove the mctp-controller on bus 15 in next serial of patches. Ah, so having looked through v2, I can see what you're trying to achieve. I don't think it's necessary to split this out from the NIC mux patch, they are related. Andrew
> -----Original Message----- > From: Andrew Jeffery <andrew@codeconstruct.com.au> > Sent: Wednesday, October 2, 2024 9:48 AM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; Rob Herring <robh@kernel.org>; Krzysztof Kozlowski > <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Joel Stanley > <joel@jms.id.au> > Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four > NICs > > [External Sender] > > [External Sender] > > On Tue, 2024-10-01 at 07:52 +0000, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > > > > > -----Original Message----- > > > From: Andrew Jeffery <andrew@codeconstruct.com.au> > > > Sent: Tuesday, October 1, 2024 8:37 AM > > > To: Delphine_CC_Chiu/WYHQ/Wiwynn > <Delphine_CC_Chiu@wiwynn.com>; > > > patrick@stwcx.xyz; Rob Herring <robh@kernel.org>; Krzysztof > > > Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; > > > Joel Stanley <joel@jms.id.au> > > > Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>; > > > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > > linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org > > > Subject: Re: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux > > > for four NICs > > > > > > [External Sender] > > > > > > [External Sender] > > > > > > On Mon, 2024-09-30 at 15:04 +0800, Delphine CC Chiu wrote: > > > > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > > > > > > > Add i2c-mux on Spider board for four NICs and add the temperature > > > > sensor and EEPROM for the NICs. > > > > > > > > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> > > > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > > > > --- > > > > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 > > > > ++++++++++++++++++- > > > > 1 file changed, 72 insertions(+), 3 deletions(-) > > > > > > > > diff --git > > > > a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > > b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > > index dbc992a625b7..b813140b3c5b 100644 > > > > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > > > @@ -26,6 +26,10 @@ aliases { > > > > i2c21 = &imux21; > > > > i2c22 = &imux22; > > > > i2c23 = &imux23; > > > > + i2c24 = &imux24; > > > > + i2c25 = &imux25; > > > > + i2c26 = &imux26; > > > > + i2c27 = &imux27; > > > > i2c34 = &imux34; > > > > i2c35 = &imux35; > > > > }; > > > > @@ -1196,8 +1200,9 @@ adc@35 { > > > > }; > > > > > > > > &i2c15 { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > status = "okay"; > > > > - mctp-controller; > > > > > > Why are you deleting this if you're not also deleting the MCTP endpoint > node? > > > > > > Unless there's some reason this is related to the NICs, this should > > > be its own patch with its own justification. > > > > > > Andrew > > Hi Andrew, > > > > We have discussed with Jeremy from Code Construct about removing the > > mctp-controller on bus 15 before. > > > > He thought it would be better to add the mctp-controller on each i2c > > mux port so the MCTP driver would ensure that the mux was configured > > properly before communicating with the device. > > > > I'll split a patch to remove the mctp-controller on bus 15 in next serial of > patches. > > Ah, so having looked through v2, I can see what you're trying to achieve. I don't > think it's necessary to split this out from the NIC mux patch, they are related. > > Andrew Sure, I'll merge the patch to the NIC mux patch in the next version of patches. Regards, Ricky
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index dbc992a625b7..b813140b3c5b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -26,6 +26,10 @@ aliases { i2c21 = &imux21; i2c22 = &imux22; i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; i2c34 = &imux34; i2c35 = &imux35; }; @@ -1196,8 +1200,9 @@ adc@35 { }; &i2c15 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - mctp-controller; multi-master; bus-frequency = <400000>; @@ -1208,9 +1213,73 @@ mctp@10 { i2c-mux@72 { compatible = "nxp,pca9544"; - idle-state = <0>; - i2c-mux-idle-disconnect; reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + imux24: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux25: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux26: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + imux27: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; }; };