@@ -2336,6 +2336,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
u32 reg;
int i;
+ dwc->susphy_state = !!(dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
+ DWC3_GUSB2PHYCFG_SUSPHY);
+
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
if (pm_runtime_suspended(dwc->dev))
@@ -2387,6 +2390,11 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
+ if (!PMSG_IS_AUTO(msg)) {
+ if (!dwc->susphy_state)
+ dwc3_enable_susphy(dwc, true);
+ }
+
return 0;
}
@@ -2454,6 +2462,14 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
+ if (!PMSG_IS_AUTO(msg)) {
+ /* dwc3_core_init_for_resume() disables SUSPHY so just handle
+ * the enable case
+ */
+ if (dwc->susphy_state)
+ dwc3_enable_susphy(dwc, true);
+ }
+
return 0;
}
@@ -1150,6 +1150,7 @@ struct dwc3_scratchpad_array {
* @sys_wakeup: set if the device may do system wakeup.
* @wakeup_configured: set if the device is configured for remote wakeup.
* @suspended: set to track suspend event due to U3/L2.
+ * @susphy_state: state of DWC3_GUSB2PHYCFG_SUSPHY before PM suspend.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
* @max_cfg_eps: current max number of IN eps used across all USB configs.
@@ -1382,6 +1383,7 @@ struct dwc3 {
unsigned sys_wakeup:1;
unsigned wakeup_configured:1;
unsigned suspended:1;
+ unsigned susphy_state:1;
u16 imod_interval;
Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"), system suspend is broken on AM62 TI platforms. Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY bits (hence forth called 2 SUSPHY bits) were being set during core initialization and even during core re-initialization after a system suspend/resume. These bits are required to be set for system suspend/resume to work correctly on AM62 platforms. Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget driver is not loaded and started. For Host mode, the 2 SUSPHY bits are set before the first system suspend but get cleared at system resume during core re-init and are never set again. This patch resovles these two issues by ensuring the 2 SUSPHY bits are set before system suspend and restored to the original state during system resume. Cc: stable@vger.kernel.org # v6.9+ Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/ Signed-off-by: Roger Quadros <rogerq@kernel.org> --- drivers/usb/dwc3/core.c | 16 ++++++++++++++++ drivers/usb/dwc3/core.h | 2 ++ 2 files changed, 18 insertions(+) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20240923-am62-lpm-usb-f420917bd707 Best regards,