| Message ID | 20241002-finch-sugar-9958077e8c2b@spud (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Redo PolarFire SoC's mailbox/clock devicestrees and related code | expand |
On Wed, Oct 02, 2024 at 11:48:08AM +0100, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > When the binding for the mailbox on PolarFire SoC was originally > written, and later modified, mistakes were made - and the precise > nature of the later modification should have been a giveaway, but alas > I was naive at the time. > > A more correct modelling of the hardware is to use two syscons and have > a single reg entry for the mailbox, containing the mailbox region. The > two syscons contain the general control/status registers for the mailbox > and the interrupt related registers respectively. The reason for two > syscons is that the same mailbox is present on the non-SoC version of > the FPGA, which has no interrupt controller, and the shared part of the > rtl was unchanged between devices. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- > arch/riscv/boot/dts/microchip/mpfs.dtsi | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi > index 9883ca3554c50..f8a45e4f00a0d 100644 > --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi > +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi > @@ -259,6 +259,11 @@ clkcfg: clkcfg@20002000 { > #reset-cells = <1>; > }; > > + sysreg_scb: syscon@20003000 { > + compatible = "microchip,mpfs-sysreg-scb", "syscon"; > + reg = <0x0 0x20003000 0x0 0x1000>; > + }; > + > ccc_se: clock-controller@38010000 { > compatible = "microchip,mpfs-ccc"; > reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>, > @@ -521,10 +526,14 @@ usb: usb@20201000 { > status = "disabled"; > }; > > - mbox: mailbox@37020000 { > + control_scb: syscon@37020000 { > + compatible = "microchip,mpfs-control-scb", "syscon", "simple-mfd"; > + reg = <0x0 0x37020000 0x0 0x100>; It came up today that this 0x100 isn't correct - the actual size here is 4 KiB, so there's a zero missing. > + }; > + > + mbox: mailbox@37020800 { > compatible = "microchip,mpfs-mailbox"; > - reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, > - <0x0 0x37020800 0x0 0x100>; > + reg = <0x0 0x37020800 0x0 0x100>; > interrupt-parent = <&plic>; > interrupts = <96>; > #mbox-cells = <1>; > -- > 2.45.2 >
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 9883ca3554c50..f8a45e4f00a0d 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -259,6 +259,11 @@ clkcfg: clkcfg@20002000 { #reset-cells = <1>; }; + sysreg_scb: syscon@20003000 { + compatible = "microchip,mpfs-sysreg-scb", "syscon"; + reg = <0x0 0x20003000 0x0 0x1000>; + }; + ccc_se: clock-controller@38010000 { compatible = "microchip,mpfs-ccc"; reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>, @@ -521,10 +526,14 @@ usb: usb@20201000 { status = "disabled"; }; - mbox: mailbox@37020000 { + control_scb: syscon@37020000 { + compatible = "microchip,mpfs-control-scb", "syscon", "simple-mfd"; + reg = <0x0 0x37020000 0x0 0x100>; + }; + + mbox: mailbox@37020800 { compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, - <0x0 0x37020800 0x0 0x100>; + reg = <0x0 0x37020800 0x0 0x100>; interrupt-parent = <&plic>; interrupts = <96>; #mbox-cells = <1>;