diff mbox series

[v12,4/5] arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node

Message ID 20241003170118.24932-5-afd@ti.com (mailing list archive)
State New
Headers show
Series TI K3 M4F support on AM62 and AM64 SoCs | expand

Commit Message

Andrew Davis Oct. 3, 2024, 5:01 p.m. UTC 
From: Hari Nagalla <hnagalla@ti.com>

The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.

The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 86369525259c3..26d4ad5e96f1c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -99,6 +99,18 @@  main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
 			no-map;
 		};
 
+		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_m4fss_memory_region: m4f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
 		rtos_ipc_memory_region: ipc-memories@a5000000 {
 			reg = <0x00 0xa5000000 0x00 0x00800000>;
 			alignment = <0x1000>;
@@ -681,6 +693,13 @@  &main_r5fss1_core1 {
 			<&main_r5fss1_core1_memory_region>;
 };
 
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */