Message ID | 20241012085343.6594-1-zhengzengkai@huawei.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] ACPI: GTDT: Tighten the check for the array of platform timer structures | expand |
On Sat, 12 Oct 2024 09:53:43 +0100, Zheng Zengkai <zhengzengkai@huawei.com> wrote: > > As suggested by Marc and Lorenzo, first we need to check whether the > platform_timer entry pointer is within gtdt bounds (< gtdt_end) before > de-referencing what it points at to detect the length of the platform > timer struct and then check that the length of current platform_timer > struct is within gtdt_end too. Now next_platform_timer() only checks > against gtdt_end for the entry of subsequent platform timer without > checking the length of it and will not report error if the check failed. > > Add check against table length (gtdt_end) for each element of platform > timer array in acpi_gtdt_init() early, making sure that both their entry > and length actually fit in the table. > > For the first platform timer, keep the check against the end of the > acpi_table_gtdt struct, it is unnecessary for subsequent platform timer. Really? > > Suggested-by: Marc Zyngier <maz@kernel.org> > Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> > --- > Changes in v2: > - Check against gtdt_end for both entry and len of each array element > > v1: https://lore.kernel.org/all/20241010144703.113728-1-zhengzengkai@huawei.com/ > --- > drivers/acpi/arm64/gtdt.c | 19 +++++++++++++++---- > 1 file changed, 15 insertions(+), 4 deletions(-) > > diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c > index c0e77c1c8e09..f5f62643899d 100644 > --- a/drivers/acpi/arm64/gtdt.c > +++ b/drivers/acpi/arm64/gtdt.c > @@ -157,6 +157,8 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > { > void *platform_timer; > struct acpi_table_gtdt *gtdt; > + struct acpi_gtdt_header *gh; > + void *struct_end; > > gtdt = container_of(table, struct acpi_table_gtdt, header); > acpi_gtdt_desc.gtdt = gtdt; > @@ -177,11 +179,20 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > } > > platform_timer = (void *)gtdt + gtdt->platform_timer_offset; > - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { > - pr_err(FW_BUG "invalid timer data.\n"); > - return -EINVAL; > + struct_end = (void *)table + sizeof(struct acpi_table_gtdt); > + for (int i = 0; i < gtdt->platform_timer_count; i++) { > + gh = platform_timer; > + if (((i == 0 && platform_timer >= struct_end) || i != 0) && Why is only index 0 checked against the end of the table? Shouldn't int be an invariant that all timer descriptions must not intersect with the non-variable part of the GTDT table? > + platform_timer < acpi_gtdt_desc.gtdt_end && > + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end) { Surely, assuming that length isn't zero, if the last term is true, the previous one also is? And what if it is 0? Again, you cannot trust *anything* you find in the ACPI table. > + platform_timer += gh->length; You are also reinventing the wheel, and repeating some of the worse constructs in this code. It would be much better to build on (and augment) the existing primitives to make the code *readable* instead of being this pointer soup. Believe it or not, there is some value in abstracting things. I came up with the patchlet below, very lightly tested on my Synquacer. It may not be optimal, but given that this is used exactly once per boot, I'm sure we can afford a few extra comparisons. It makes the iterator robust, and then uses that to implement the checks. M. diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index c0e77c1c8e09d..dca814183cc5c 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -36,15 +36,24 @@ struct acpi_gtdt_descriptor { static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; -static inline __init void *next_platform_timer(void *platform_timer) +static __init bool platform_timer_valid(void *platform_timer) { struct acpi_gtdt_header *gh = platform_timer; - platform_timer += gh->length; - if (platform_timer < acpi_gtdt_desc.gtdt_end) - return platform_timer; + return (gh->length != 0 && + platform_timer >= (void *)(acpi_gtdt_desc.gtdt + 1) && + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end); +} + +static __init void *next_platform_timer(void *platform_timer) +{ + struct acpi_gtdt_header *gh = platform_timer; - return NULL; + if (!platform_timer_valid(platform_timer) || + !platform_timer_valid(platform_timer + gh->length)) + return NULL; + + return platform_timer + gh->length; } #define for_each_platform_timer(_g) \ @@ -155,8 +164,9 @@ bool __init acpi_gtdt_c3stop(int type) int __init acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count) { - void *platform_timer; + void *platform_timer, *tmp; struct acpi_table_gtdt *gtdt; + int cnt = 0; gtdt = container_of(table, struct acpi_table_gtdt, header); acpi_gtdt_desc.gtdt = gtdt; @@ -177,7 +187,12 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, } platform_timer = (void *)gtdt + gtdt->platform_timer_offset; - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { + for (tmp = platform_timer; + tmp && platform_timer_valid(tmp); + tmp = next_platform_timer(tmp)) + cnt++; + + if (cnt != gtdt->platform_timer_count) { pr_err(FW_BUG "invalid timer data.\n"); return -EINVAL; }
Hi Marc, 在 2024/10/13 1:34, Marc Zyngier 写道: > On Sat, 12 Oct 2024 09:53:43 +0100, > Zheng Zengkai <zhengzengkai@huawei.com> wrote: >> As suggested by Marc and Lorenzo, first we need to check whether the >> platform_timer entry pointer is within gtdt bounds (< gtdt_end) before >> de-referencing what it points at to detect the length of the platform >> timer struct and then check that the length of current platform_timer >> struct is within gtdt_end too. Now next_platform_timer() only checks >> against gtdt_end for the entry of subsequent platform timer without >> checking the length of it and will not report error if the check failed. >> >> Add check against table length (gtdt_end) for each element of platform >> timer array in acpi_gtdt_init() early, making sure that both their entry >> and length actually fit in the table. >> >> For the first platform timer, keep the check against the end of the >> acpi_table_gtdt struct, it is unnecessary for subsequent platform timer. > Really? > >> Suggested-by: Marc Zyngier <maz@kernel.org> >> Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> >> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> >> --- >> Changes in v2: >> - Check against gtdt_end for both entry and len of each array element >> >> v1: https://lore.kernel.org/all/20241010144703.113728-1-zhengzengkai@huawei.com/ >> --- >> drivers/acpi/arm64/gtdt.c | 19 +++++++++++++++---- >> 1 file changed, 15 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c >> index c0e77c1c8e09..f5f62643899d 100644 >> --- a/drivers/acpi/arm64/gtdt.c >> +++ b/drivers/acpi/arm64/gtdt.c >> @@ -157,6 +157,8 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, >> { >> void *platform_timer; >> struct acpi_table_gtdt *gtdt; >> + struct acpi_gtdt_header *gh; >> + void *struct_end; >> >> gtdt = container_of(table, struct acpi_table_gtdt, header); >> acpi_gtdt_desc.gtdt = gtdt; >> @@ -177,11 +179,20 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, >> } >> >> platform_timer = (void *)gtdt + gtdt->platform_timer_offset; >> - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { >> - pr_err(FW_BUG "invalid timer data.\n"); >> - return -EINVAL; >> + struct_end = (void *)table + sizeof(struct acpi_table_gtdt); >> + for (int i = 0; i < gtdt->platform_timer_count; i++) { >> + gh = platform_timer; >> + if (((i == 0 && platform_timer >= struct_end) || i != 0) && > Why is only index 0 checked against the end of the table? Shouldn't > int be an invariant that all timer descriptions must not intersect > with the non-variable part of the GTDT table? AFAICS, after checking against the end of the acpi_table_gtdt struct for the first platform timer, the subsequent platform_timer pointer value computed via "platform_timer + gh->length" will also pass the check, as the gh->length is of u16 type. >> + platform_timer < acpi_gtdt_desc.gtdt_end && >> + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end) { > Surely, assuming that length isn't zero, if the last term is true, the > previous one also is? And what if it is 0? Agree , the length should also be checked against 0, but I think we should first check the platform_timer entry pointer, then check the size of the same platform_timer structure, not check them in the opposite order. > Again, you cannot trust *anything* you find in the ACPI table. > >> + platform_timer += gh->length; > You are also reinventing the wheel, and repeating some of the worse > constructs in this code. It would be much better to build on (and > augment) the existing primitives to make the code *readable* instead > of being this pointer soup. Believe it or not, there is some value in > abstracting things. Yes. Abstract things common and reuse it is better. > I came up with the patchlet below, very lightly tested on my > Synquacer. It may not be optimal, but given that this is used exactly > once per boot, I'm sure we can afford a few extra comparisons. It > makes the iterator robust, and then uses that to implement the checks. > > M. > > diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c > index c0e77c1c8e09d..dca814183cc5c 100644 > --- a/drivers/acpi/arm64/gtdt.c > +++ b/drivers/acpi/arm64/gtdt.c > @@ -36,15 +36,24 @@ struct acpi_gtdt_descriptor { > > static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata; > > -static inline __init void *next_platform_timer(void *platform_timer) > +static __init bool platform_timer_valid(void *platform_timer) > { > struct acpi_gtdt_header *gh = platform_timer; > > - platform_timer += gh->length; > - if (platform_timer < acpi_gtdt_desc.gtdt_end) > - return platform_timer; > + return (gh->length != 0 && Shall we first check against gtdt_end for the platform_timer entry? making sure that platform timer entry(the gh) is within gtdt_end and valid Thanks! > + platform_timer >= (void *)(acpi_gtdt_desc.gtdt + 1) && > + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end); > +} > + > +static __init void *next_platform_timer(void *platform_timer) > +{ > + struct acpi_gtdt_header *gh = platform_timer; > > - return NULL; > + if (!platform_timer_valid(platform_timer) || > + !platform_timer_valid(platform_timer + gh->length)) > + return NULL; > + > + return platform_timer + gh->length; > } > > #define for_each_platform_timer(_g) \ > @@ -155,8 +164,9 @@ bool __init acpi_gtdt_c3stop(int type) > int __init acpi_gtdt_init(struct acpi_table_header *table, > int *platform_timer_count) > { > - void *platform_timer; > + void *platform_timer, *tmp; > struct acpi_table_gtdt *gtdt; > + int cnt = 0; > > gtdt = container_of(table, struct acpi_table_gtdt, header); > acpi_gtdt_desc.gtdt = gtdt; > @@ -177,7 +187,12 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > } > > platform_timer = (void *)gtdt + gtdt->platform_timer_offset; > - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { > + for (tmp = platform_timer; > + tmp && platform_timer_valid(tmp); > + tmp = next_platform_timer(tmp)) > + cnt++; > + > + if (cnt != gtdt->platform_timer_count) { > pr_err(FW_BUG "invalid timer data.\n"); > return -EINVAL; > } >
On Mon, 14 Oct 2024 13:22:26 +0100, Zheng Zengkai <zhengzengkai@huawei.com> wrote: > > Hi Marc, > > 在 2024/10/13 1:34, Marc Zyngier 写道: > > On Sat, 12 Oct 2024 09:53:43 +0100, > > Zheng Zengkai <zhengzengkai@huawei.com> wrote: > >> As suggested by Marc and Lorenzo, first we need to check whether the > >> platform_timer entry pointer is within gtdt bounds (< gtdt_end) before > >> de-referencing what it points at to detect the length of the platform > >> timer struct and then check that the length of current platform_timer > >> struct is within gtdt_end too. Now next_platform_timer() only checks > >> against gtdt_end for the entry of subsequent platform timer without > >> checking the length of it and will not report error if the check failed. > >> > >> Add check against table length (gtdt_end) for each element of platform > >> timer array in acpi_gtdt_init() early, making sure that both their entry > >> and length actually fit in the table. > >> > >> For the first platform timer, keep the check against the end of the > >> acpi_table_gtdt struct, it is unnecessary for subsequent platform timer. > > Really? > > > >> Suggested-by: Marc Zyngier <maz@kernel.org> > >> Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > >> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> > >> --- > >> Changes in v2: > >> - Check against gtdt_end for both entry and len of each array element > >> > >> v1: https://lore.kernel.org/all/20241010144703.113728-1-zhengzengkai@huawei.com/ > >> --- > >> drivers/acpi/arm64/gtdt.c | 19 +++++++++++++++---- > >> 1 file changed, 15 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c > >> index c0e77c1c8e09..f5f62643899d 100644 > >> --- a/drivers/acpi/arm64/gtdt.c > >> +++ b/drivers/acpi/arm64/gtdt.c > >> @@ -157,6 +157,8 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > >> { > >> void *platform_timer; > >> struct acpi_table_gtdt *gtdt; > >> + struct acpi_gtdt_header *gh; > >> + void *struct_end; > >> gtdt = container_of(table, struct acpi_table_gtdt, header); > >> acpi_gtdt_desc.gtdt = gtdt; > >> @@ -177,11 +179,20 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, > >> } > >> platform_timer = (void *)gtdt + gtdt->platform_timer_offset; > >> - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { > >> - pr_err(FW_BUG "invalid timer data.\n"); > >> - return -EINVAL; > >> + struct_end = (void *)table + sizeof(struct acpi_table_gtdt); > >> + for (int i = 0; i < gtdt->platform_timer_count; i++) { > >> + gh = platform_timer; > >> + if (((i == 0 && platform_timer >= struct_end) || i != 0) && > > Why is only index 0 checked against the end of the table? Shouldn't > > int be an invariant that all timer descriptions must not intersect > > with the non-variable part of the GTDT table? > > > AFAICS, after checking against the end of the acpi_table_gtdt struct for the > first platform timer, the subsequent platform_timer pointer value > computed via "platform_timer + gh->length" will also pass the check, > as the gh->length is of u16 type. But this is something that isn't obvious to the casual reader of this code, and you want to keep validation code simple and localised, with as few separate cases as you can. This isn't performance critical code, and there is nothing to be gained by "optimising" this. > > > >> + platform_timer < acpi_gtdt_desc.gtdt_end && > >> + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end) { > > Surely, assuming that length isn't zero, if the last term is true, the > > previous one also is? And what if it is 0? > > > Agree , the length should also be checked against 0, > but I think we should first check the platform_timer entry pointer, > then check the size of the same platform_timer structure, > not check them in the opposite order. Correct, that's something that needs fixing. Run with it. M.
Hi Marc, 在 2024/10/14 22:26, Marc Zyngier 写道: > On Mon, 14 Oct 2024 13:22:26 +0100, > Zheng Zengkai <zhengzengkai@huawei.com> wrote: >> Hi Marc, >> >> 在 2024/10/13 1:34, Marc Zyngier 写道: >>> On Sat, 12 Oct 2024 09:53:43 +0100, >>> Zheng Zengkai <zhengzengkai@huawei.com> wrote: >>>> As suggested by Marc and Lorenzo, first we need to check whether the >>>> platform_timer entry pointer is within gtdt bounds (< gtdt_end) before >>>> de-referencing what it points at to detect the length of the platform >>>> timer struct and then check that the length of current platform_timer >>>> struct is within gtdt_end too. Now next_platform_timer() only checks >>>> against gtdt_end for the entry of subsequent platform timer without >>>> checking the length of it and will not report error if the check failed. >>>> >>>> Add check against table length (gtdt_end) for each element of platform >>>> timer array in acpi_gtdt_init() early, making sure that both their entry >>>> and length actually fit in the table. >>>> >>>> For the first platform timer, keep the check against the end of the >>>> acpi_table_gtdt struct, it is unnecessary for subsequent platform timer. >>> Really? >>> >>>> Suggested-by: Marc Zyngier <maz@kernel.org> >>>> Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> >>>> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> >>>> --- >>>> Changes in v2: >>>> - Check against gtdt_end for both entry and len of each array element >>>> >>>> v1: https://lore.kernel.org/all/20241010144703.113728-1-zhengzengkai@huawei.com/ >>>> --- >>>> drivers/acpi/arm64/gtdt.c | 19 +++++++++++++++---- >>>> 1 file changed, 15 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c >>>> index c0e77c1c8e09..f5f62643899d 100644 >>>> --- a/drivers/acpi/arm64/gtdt.c >>>> +++ b/drivers/acpi/arm64/gtdt.c >>>> @@ -157,6 +157,8 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, >>>> { >>>> void *platform_timer; >>>> struct acpi_table_gtdt *gtdt; >>>> + struct acpi_gtdt_header *gh; >>>> + void *struct_end; >>>> gtdt = container_of(table, struct acpi_table_gtdt, header); >>>> acpi_gtdt_desc.gtdt = gtdt; >>>> @@ -177,11 +179,20 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, >>>> } >>>> platform_timer = (void *)gtdt + gtdt->platform_timer_offset; >>>> - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { >>>> - pr_err(FW_BUG "invalid timer data.\n"); >>>> - return -EINVAL; >>>> + struct_end = (void *)table + sizeof(struct acpi_table_gtdt); >>>> + for (int i = 0; i < gtdt->platform_timer_count; i++) { >>>> + gh = platform_timer; >>>> + if (((i == 0 && platform_timer >= struct_end) || i != 0) && >>> Why is only index 0 checked against the end of the table? Shouldn't >>> int be an invariant that all timer descriptions must not intersect >>> with the non-variable part of the GTDT table? >> >> AFAICS, after checking against the end of the acpi_table_gtdt struct for the >> first platform timer, the subsequent platform_timer pointer value >> computed via "platform_timer + gh->length" will also pass the check, >> as the gh->length is of u16 type. > But this is something that isn't obvious to the casual reader of this > code, and you want to keep validation code simple and localised, with > as few separate cases as you can. This isn't performance critical > code, and there is nothing to be gained by "optimising" this. OK >> >>>> + platform_timer < acpi_gtdt_desc.gtdt_end && >>>> + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end) { >>> Surely, assuming that length isn't zero, if the last term is true, the >>> previous one also is? And what if it is 0? >> >> Agree , the length should also be checked against 0, >> but I think we should first check the platform_timer entry pointer, >> then check the size of the same platform_timer structure, >> not check them in the opposite order. > Correct, that's something that needs fixing. Run with it. > > M. OK, I will do that. Thanks!
diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index c0e77c1c8e09..f5f62643899d 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -157,6 +157,8 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, { void *platform_timer; struct acpi_table_gtdt *gtdt; + struct acpi_gtdt_header *gh; + void *struct_end; gtdt = container_of(table, struct acpi_table_gtdt, header); acpi_gtdt_desc.gtdt = gtdt; @@ -177,11 +179,20 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, } platform_timer = (void *)gtdt + gtdt->platform_timer_offset; - if (platform_timer < (void *)table + sizeof(struct acpi_table_gtdt)) { - pr_err(FW_BUG "invalid timer data.\n"); - return -EINVAL; + struct_end = (void *)table + sizeof(struct acpi_table_gtdt); + for (int i = 0; i < gtdt->platform_timer_count; i++) { + gh = platform_timer; + if (((i == 0 && platform_timer >= struct_end) || i != 0) && + platform_timer < acpi_gtdt_desc.gtdt_end && + platform_timer + gh->length <= acpi_gtdt_desc.gtdt_end) { + platform_timer += gh->length; + } else { + pr_err(FW_BUG "invalid timer data.\n"); + return -EINVAL; + } } - acpi_gtdt_desc.platform_timer = platform_timer; + + acpi_gtdt_desc.platform_timer = (void *)gtdt + gtdt->platform_timer_offset; if (platform_timer_count) *platform_timer_count = gtdt->platform_timer_count;
As suggested by Marc and Lorenzo, first we need to check whether the platform_timer entry pointer is within gtdt bounds (< gtdt_end) before de-referencing what it points at to detect the length of the platform timer struct and then check that the length of current platform_timer struct is within gtdt_end too. Now next_platform_timer() only checks against gtdt_end for the entry of subsequent platform timer without checking the length of it and will not report error if the check failed. Add check against table length (gtdt_end) for each element of platform timer array in acpi_gtdt_init() early, making sure that both their entry and length actually fit in the table. For the first platform timer, keep the check against the end of the acpi_table_gtdt struct, it is unnecessary for subsequent platform timer. Suggested-by: Marc Zyngier <maz@kernel.org> Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- Changes in v2: - Check against gtdt_end for both entry and len of each array element v1: https://lore.kernel.org/all/20241010144703.113728-1-zhengzengkai@huawei.com/ --- drivers/acpi/arm64/gtdt.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)