| Message ID | 20241013185056.4077-1-ericwouds@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,v1,net-next] net: ethernet: mtk_ppe_offload: Allow QinQ | expand |
On Sun, Oct 13, 2024 at 08:50:56PM +0200, Eric Woudstra wrote: > mtk_foe_entry_set_vlan() in mtk_ppe.c already seems to support > double vlan tagging, but mtk_flow_offload_replace() in > mtk_ppe_offload.c only allows for 1 vlan tag, optionally in > combination with pppoe and dsa tags. > > This patch adds QinQ support to mtk_flow_offload_replace(). > > Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination > of PPPoE and Q-in-Q is not allowed. > > As I do not have any documentation of the ppe hardware, I do not > know if there is any other reason to not implement Q-in-Q in > mtk_flow_offload_replace(). > > Tested on the BPI-R3(mini), on non-dsa-ports and dsa-ports. > > Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Hi Eric, I see that this patch supports up to two VLANs, both with EtherType 0x8100. And assuming that is supported by the hardware, that seems fine to me. But I winder if you know if this hardware supports other VLAN EtherTypes, such as 0x88a8 which is described in 802.1ad? ...
On 10/14/24 10:51 AM, Simon Horman wrote: > On Sun, Oct 13, 2024 at 08:50:56PM +0200, Eric Woudstra wrote: >> mtk_foe_entry_set_vlan() in mtk_ppe.c already seems to support >> double vlan tagging, but mtk_flow_offload_replace() in >> mtk_ppe_offload.c only allows for 1 vlan tag, optionally in >> combination with pppoe and dsa tags. >> >> This patch adds QinQ support to mtk_flow_offload_replace(). >> >> Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination >> of PPPoE and Q-in-Q is not allowed. >> >> As I do not have any documentation of the ppe hardware, I do not >> know if there is any other reason to not implement Q-in-Q in >> mtk_flow_offload_replace(). >> >> Tested on the BPI-R3(mini), on non-dsa-ports and dsa-ports. >> >> Signed-off-by: Eric Woudstra <ericwouds@gmail.com> > > Hi Eric, > > I see that this patch supports up to two VLANs, both with EtherType 0x8100. > And assuming that is supported by the hardware, that seems fine to me. > > But I winder if you know if this hardware supports other VLAN EtherTypes, > such as 0x88a8 which is described in 802.1ad? Hello Simon, The issue is that I do not have the documentation. Therefore I submit this patch as RFC and I hope someone at mediatek or so can confirm we can implement QinQ as in this patch on all hardware that uses mtk_ppe_offload. But it does not look like it supports 0x88a8 from 802.1ad.
diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c index f20bb390df3a..c19789883a9d 100644 --- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c @@ -34,8 +34,10 @@ struct mtk_flow_data { u16 vlan_in; struct { - u16 id; - __be16 proto; + struct { + u16 id; + __be16 proto; + } vlans[2]; u8 num; } vlan; struct { @@ -349,18 +351,19 @@ mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f, case FLOW_ACTION_CSUM: break; case FLOW_ACTION_VLAN_PUSH: - if (data.vlan.num == 1 || + if (data.vlan.num + data.pppoe.num == 2 || act->vlan.proto != htons(ETH_P_8021Q)) return -EOPNOTSUPP; - data.vlan.id = act->vlan.vid; - data.vlan.proto = act->vlan.proto; + data.vlan.vlans[data.vlan.num].id = act->vlan.vid; + data.vlan.vlans[data.vlan.num].proto = act->vlan.proto; data.vlan.num++; break; case FLOW_ACTION_VLAN_POP: break; case FLOW_ACTION_PPPOE_PUSH: - if (data.pppoe.num == 1) + if (data.pppoe.num == 1 || + data.vlan.num == 2) return -EOPNOTSUPP; data.pppoe.sid = act->pppoe.sid; @@ -450,11 +453,11 @@ mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f, if (offload_type == MTK_PPE_PKT_TYPE_BRIDGE) foe.bridge.vlan = data.vlan_in; - if (data.vlan.num == 1) { - if (data.vlan.proto != htons(ETH_P_8021Q)) + for (i = 0; i < data.vlan.num; i++) { + if (data.vlan.vlans[i].proto != htons(ETH_P_8021Q)) return -EOPNOTSUPP; - mtk_foe_entry_set_vlan(eth, &foe, data.vlan.id); + mtk_foe_entry_set_vlan(eth, &foe, data.vlan.vlans[i].id); } if (data.pppoe.num == 1) mtk_foe_entry_set_pppoe(eth, &foe, data.pppoe.sid);
mtk_foe_entry_set_vlan() in mtk_ppe.c already seems to support double vlan tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows for 1 vlan tag, optionally in combination with pppoe and dsa tags. This patch adds QinQ support to mtk_flow_offload_replace(). Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination of PPPoE and Q-in-Q is not allowed. As I do not have any documentation of the ppe hardware, I do not know if there is any other reason to not implement Q-in-Q in mtk_flow_offload_replace(). Tested on the BPI-R3(mini), on non-dsa-ports and dsa-ports. Signed-off-by: Eric Woudstra <ericwouds@gmail.com> --- .../net/ethernet/mediatek/mtk_ppe_offload.c | 21 +++++++++++-------- 1 file changed, 12 insertions(+), 9 deletions(-)