| Message ID | 20241014105031.1963079-1-chanh@os.amperecomputing.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC | expand |
Hi @Andrew, I just upstreamed the patch https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/Documentation/devicetree/bindings/trivial-devices.yaml?id=3d973b98d2744cfced1f06167c83e2cc2d7b63d5 to linux-next branch, I think we also need to pick it up to https://github.com/openbmc/linux/tree/dev-6.6, which will help pass the "onnn,adt7462" compatible warning log from the dt_binding_check tool. On 14/10/2024 17:50, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ > 2 files changed, 647 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile > index c4f064e4b073..b1fb0853a789 100644 > --- a/arch/arm/boot/dts/aspeed/Makefile > +++ b/arch/arm/boot/dts/aspeed/Makefile > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-amd-daytonax.dtb \ > aspeed-bmc-amd-ethanolx.dtb \ > aspeed-bmc-ampere-mtjade.dtb \ > + aspeed-bmc-ampere-mtjefferson.dtb \ > aspeed-bmc-ampere-mtmitchell.dtb \ > aspeed-bmc-arm-stardragon4800-rep2.dtb \ > aspeed-bmc-asrock-e3c246d4i.dtb \ > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > new file mode 100644 > index 000000000000..f24111ab9e65 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > @@ -0,0 +1,646 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright 2024 Ampere Computing LLC. > + > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include <dt-bindings/i2c/i2c.h> > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Ampere Mt. Jefferson BMC"; > + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; > + > + aliases { > + i2c20 = &i2c4_bus70_chn0; > + i2c22 = &i2c4_bus70_chn2; > + i2c24 = &i2c2_bus70_chn0; > + > + /* > + * I2C OCP alias port > + */ > + i2c30 = &ocpslot; > + > + /* > + * I2C NVMe alias port > + */ > + i2c48 = &nvmeslot_0; > + i2c49 = &nvmeslot_1; > + i2c50 = &nvmeslot_2; > + i2c51 = &nvmeslot_3; > + i2c52 = &nvmeslot_4; > + i2c53 = &nvmeslot_5; > + i2c54 = &nvmeslot_6; > + i2c55 = &nvmeslot_7; > + i2c56 = &nvmeslot_8; > + i2c57 = &nvmeslot_9; > + i2c58 = &nvmeslot_10; > + i2c59 = &nvmeslot_11; > + }; > + > + chosen { > + stdout-path = &uart5; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x80000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: video { > + size = <0x04000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + vga_memory: region@bf000000 { > + no-map; > + compatible = "shared-dma-pool"; > + reg = <0xbf000000 0x01000000>; /* 16M */ > + }; > + }; > + > + voltage_mon_reg: voltage-mon-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ltc2497_reg"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + leds { > + compatible = "gpio-leds"; > + led-bmc-ready { > + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; > + }; > + > + led-sw-heartbeat { > + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; > + }; > + > + led-identify { > + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; > + }; > + > + led-fault { > + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, > + <&adc_i2c_2 0>, <&adc_i2c_2 1>, > + <&adc_i2c_2 2>, <&adc_i2c_2 3>, > + <&adc_i2c_2 4>, <&adc_i2c_2 5>, > + <&adc_i2c_2 6>, <&adc_i2c_2 7>, > + <&adc_i2c_2 8>, <&adc_i2c_2 9>, > + <&adc_i2c_2 10>, <&adc_i2c_2 11>, > + <&adc_i2c_2 12>, <&adc_i2c_2 13>, > + <&adc_i2c_2 14>, <&adc_i2c_2 15>, > + <&adc_i2c_0 0>, <&adc_i2c_0 1>, > + <&adc_i2c_0 2>, <&adc_i2c_0 3>, > + <&adc_i2c_0 4>, <&adc_i2c_0 5>, > + <&adc_i2c_0 6>, <&adc_i2c_0 7>, > + <&adc_i2c_0 8>, <&adc_i2c_0 9>, > + <&adc_i2c_0 10>, <&adc_i2c_0 11>, > + <&adc_i2c_0 12>; > + }; > +}; > + > +&mdio0 { > + status = "okay"; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac0 { > + status = "okay"; > + > + phy-mode = "rgmii"; > + phy-handle = <ðphy0>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii1_default>; > +}; > + > +&mac3 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii4_default>; > + clock-names = "MACCLK", "RCLK"; > + use-ncsi; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64.dtsi" > + }; > + > + flash@1 { > + status = "okay"; > + m25p,fast-read; > + label = "alt-bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64-alt.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + spi-max-frequency = <20000000>; > + }; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > + i2c-mux@70 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c2_bus70_chn0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + psu@58 { > + compatible = "pmbus"; > + reg = <0x58>; > + }; > + > + psu@59 { > + compatible = "pmbus"; > + reg = <0x59>; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + status = "okay"; > + bus-frequency = <1000000>; > + multi-master; > + mctp-controller; > + > + mctp@10 { > + compatible = "mctp-i2c-controller"; > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-mux@70 { > + compatible = "nxp,pca9545"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c4_bus70_chn0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + eeprom@52 { > + compatible = "atmel,24c256"; > + reg = <0x52>; > + pagesize = <32>; > + }; > + temperature-sensor@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + temperature-sensor@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + temperature-sensor@4a{ > + compatible = "ti,tmp75"; > + reg = <0x4a>; > + }; > + temperature-sensor@4b { > + compatible = "ti,tmp464"; > + reg = <0x4b>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0x0>; > + status = "disabled"; > + }; > + channel@1 { > + reg = <0x1>; > + status = "disabled"; > + }; > + channel@2 { > + reg = <0x2>; > + status = "disabled"; > + }; > + channel@3 { > + reg = <0x3>; > + status = "disabled"; > + }; > + channel@4 { > + reg = <0x4>; > + }; > + }; > + temperature-sensor@4d { > + compatible = "ti,tmp75"; > + reg = <0x4d>; > + }; > + temperature-sensor@4e { > + compatible = "ti,tmp75"; > + reg = <0x4e>; > + }; > + temperature-sensor@4f { > + compatible = "ti,tmp75"; > + reg = <0x4f>; > + }; > + temperature-sensor@28 { > + compatible = "nuvoton,nct7802"; > + reg = <0x28>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + channel@1 { /* RTD1 */ > + reg = <1>; > + sensor-type = "temperature"; > + temperature-mode = "thermistor"; > + }; > + }; > + adc_i2c_0: adc@14 { > + compatible = "lltc,ltc2497"; > + reg = <0x14>; > + vref-supply = <&voltage_mon_reg>; > + #io-channel-cells = <1>; > + }; > + }; > + > + i2c4_bus70_chn2: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + > + adc_i2c_2: adc@14 { > + compatible = "lltc,ltc2497"; > + reg = <0x14>; > + vref-supply = <&voltage_mon_reg>; > + #io-channel-cells = <1>; > + }; > + }; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > + i2c-mux@70 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + i2c-mux@71 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x71>; > + i2c-mux-idle-disconnect; > + > + nvmeslot_8: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + nvmeslot_9: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + }; > + nvmeslot_10: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + }; > + nvmeslot_11: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + }; > + }; > + > + i2c-mux@72 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x72>; > + i2c-mux-idle-disconnect; > + > + nvmeslot_4: i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + nvmeslot_5: i2c@5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + nvmeslot_6: i2c@6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + nvmeslot_7: i2c@7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > + > + i2c-mux@74 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x74>; > + i2c-mux-idle-disconnect; > + > + ocpslot: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + ocpslot_temp: temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0x0>; > + status = "disabled"; > + }; > + channel@1 { > + reg = <0x1>; > + }; > + }; > + }; > + > + nvmeslot_0: i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + nvmeslot_1: i2c@5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + nvmeslot_2: i2c@6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + nvmeslot_3: i2c@7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c6 { > + status = "okay"; > + > + rtc@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + > + temperature-sensor@4f { > + compatible = "ti,tmp75"; > + reg = <0x4f>; > + }; > +}; > + > +&i2c8 { > + status = "okay"; > + > + fan-controller@5c { > + compatible = "onnn,adt7462"; > + reg = <0x5c>; > + }; > +}; > + > +&i2c9 { > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + }; > + > + eeprom@52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + }; > + > + temperature-sensor@18 { > + compatible = "jedec,jc-42.4-temp"; > + reg = <0x18>; > + }; > + > + temperature-sensor@1a { > + compatible = "jedec,jc-42.4-temp"; > + reg = <0x1a>; > + }; > +}; > + > +&i2c10 { > + status = "okay"; > +}; > + > +&i2c11 { > + status = "okay"; > + ssif-bmc@10 { > + compatible = "ssif-bmc"; > + reg = <0x10>; > + }; > +}; > + > +&i2c14 { > + status = "okay"; > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + bmc_ast2600_cpu: temperature-sensor@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > +}; > + > +&i2c15 { > + status = "okay"; > + gpio_expander1: gpio-expander@22 { > + compatible = "nxp,pca9535"; > + reg = <0x22>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-line-names = > + "presence-ocp1","presence-ocp2", > + "","", > + "","", > + "","", > + "","", > + "","", > + "","", > + "",""; > + }; > +}; > + > +&adc0 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > + &pinctrl_adc2_default>; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +&gpio0 { > + gpio-line-names = > + /*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n", > + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete", > + "chassis-id-sel", > + /*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel", > + "spd-sel", > + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", > + "","","","", > + /*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","", > + /*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control", > + "cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","", > + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr", > + "led-fp-sta-amb", > + /*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","", > + "","", > + /*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable", > + /*J0-J7*/ "","","","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","reset-button","","","", > + /*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock", > + "","","", > + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", > + "jtag-dbgr-prsnt-n","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n", > + "led-bmc-hb", > + /*Q0-Q7*/ "","","","","","","","", > + /*R0-R7*/ "","","","","","","","", > + /*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", > + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n", > + "host0-shd-ack-n","s0-overtemp-n", > + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", > + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot", > + /*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","",""; > + > + ocp-aux-pwren-hog { > + gpio-hog; > + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; > + output-high; > + line-name = "ocp-aux-pwren"; > + }; > + > +}; > + > +&gpio1 { > + gpio-line-names = > + /*18A0-18A7*/ "","","","","","","","", > + /*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel", > + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", > + "","","","", > + /*18D0-18D7*/ "","","","","","","","", > + /*18E0-18E3*/ "","","",""; > +};
On 14/10/2024 12:50, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ > 2 files changed, 647 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile > index c4f064e4b073..b1fb0853a789 100644 > --- a/arch/arm/boot/dts/aspeed/Makefile > +++ b/arch/arm/boot/dts/aspeed/Makefile > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-amd-daytonax.dtb \ > aspeed-bmc-amd-ethanolx.dtb \ > aspeed-bmc-ampere-mtjade.dtb \ > + aspeed-bmc-ampere-mtjefferson.dtb \ > aspeed-bmc-ampere-mtmitchell.dtb \ > aspeed-bmc-arm-stardragon4800-rep2.dtb \ > aspeed-bmc-asrock-e3c246d4i.dtb \ > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > new file mode 100644 > index 000000000000..f24111ab9e65 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > @@ -0,0 +1,646 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright 2024 Ampere Computing LLC. > + > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include <dt-bindings/i2c/i2c.h> > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Ampere Mt. Jefferson BMC"; > + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; Missing binding. Please run scripts/checkpatch.pl and fix reported warnings. Then please run `scripts/checkpatch.pl --strict` and (probably) fix more warnings. Some warnings can be ignored, especially from --strict run, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. Best regards, Krzysztof
On Mon, 14 Oct 2024 10:50:31 +0000, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ > 2 files changed, 647 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjefferson.dtb' for 20241014105031.1963079-1-chanh@os.amperecomputing.com: arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed: 'ampere,mtjefferson-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc'] 'ampere,mtjefferson-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc'] 'ampere,mtjefferson-bmc' is not one of ['ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc'] 'aspeed,ast2400' was expected 'aspeed,ast2500' was expected from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /: failed to match any schema with compatible: ['ampere,mtjefferson-bmc', 'aspeed,ast2600'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: gpio@1e780000: 'ocp-aux-pwren-hog' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@58: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@59: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
On 14/10/2024 18:58, Krzysztof Kozlowski wrote: > On 14/10/2024 12:50, Chanh Nguyen wrote: >> The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson >> hardware reference platform with AmpereOne(TM)M processor. >> >> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> >> --- >> arch/arm/boot/dts/aspeed/Makefile | 1 + >> .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ >> 2 files changed, 647 insertions(+) >> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts >> >> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile >> index c4f064e4b073..b1fb0853a789 100644 >> --- a/arch/arm/boot/dts/aspeed/Makefile >> +++ b/arch/arm/boot/dts/aspeed/Makefile >> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ >> aspeed-bmc-amd-daytonax.dtb \ >> aspeed-bmc-amd-ethanolx.dtb \ >> aspeed-bmc-ampere-mtjade.dtb \ >> + aspeed-bmc-ampere-mtjefferson.dtb \ >> aspeed-bmc-ampere-mtmitchell.dtb \ >> aspeed-bmc-arm-stardragon4800-rep2.dtb \ >> aspeed-bmc-asrock-e3c246d4i.dtb \ >> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts >> new file mode 100644 >> index 000000000000..f24111ab9e65 >> --- /dev/null >> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts >> @@ -0,0 +1,646 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +// Copyright 2024 Ampere Computing LLC. >> + >> +/dts-v1/; >> + >> +#include "aspeed-g6.dtsi" >> +#include <dt-bindings/i2c/i2c.h> >> +#include <dt-bindings/gpio/aspeed-gpio.h> >> + >> +/ { >> + model = "Ampere Mt. Jefferson BMC"; >> + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; > > Missing binding. > > Please run scripts/checkpatch.pl and fix reported warnings. Then please > run `scripts/checkpatch.pl --strict` and (probably) fix more warnings. > Some warnings can be ignored, especially from --strict run, but the code > here looks like it needs a fix. Feel free to get in touch if the warning > is not clear. > Thank Krzysztof for your review! I will add my board to dt-bindings in patch v2. Follow some previous patches on Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml https://lore.kernel.org/all/20240805-potin-catalina-dts-v7-1-286bfd2ab93b@gmail.com/ https://lore.kernel.org/all/20240522192524.3286237-13-eajames@linux.ibm.com/ https://lore.kernel.org/all/20240502002836.17862-7-zev@bewilderbeest.net/ Best regards, Chanh > Best regards, > Krzysztof >
Hi Chanh, On Mon, 2024-10-14 at 09:05 -0500, Rob Herring (Arm) wrote: > On Mon, 14 Oct 2024 10:50:31 +0000, Chanh Nguyen wrote: > > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > > hardware reference platform with AmpereOne(TM)M processor. > > > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > > --- > > arch/arm/boot/dts/aspeed/Makefile | 1 + > > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ > > 2 files changed, 647 insertions(+) > > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjefferson.dtb' for 20241014105031.1963079-1-chanh@os.amperecomputing.com: > > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed: > 'ampere,mtjefferson-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc'] > 'ampere,mtjefferson-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc'] > 'ampere,mtjefferson-bmc' is not one of ['ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc'] > 'aspeed,ast2400' was expected > 'aspeed,ast2500' was expected > from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# > This needs to be fixed as pointed out by Krzysztof. *snip* > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@58: failed to match any schema with compatible: ['pmbus'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@59: failed to match any schema with compatible: ['pmbus'] These two should also be fixed. The compatible must describe the physical device, not the communication/application protocol. It may be necessary to add a binding if there's not one already for the device. Andrew
On 15/10/2024 07:44, Andrew Jeffery wrote: > Hi Chanh, > > On Mon, 2024-10-14 at 09:05 -0500, Rob Herring (Arm) wrote: >> On Mon, 14 Oct 2024 10:50:31 +0000, Chanh Nguyen wrote: >>> The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson >>> hardware reference platform with AmpereOne(TM)M processor. >>> >>> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> >>> --- >>> arch/arm/boot/dts/aspeed/Makefile | 1 + >>> .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ >>> 2 files changed, 647 insertions(+) >>> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts >>> >> >> >> My bot found new DTB warnings on the .dts files added or changed in this >> series. >> >> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings >> are fixed by another series. Ultimately, it is up to the platform >> maintainer whether these warnings are acceptable or not. No need to reply >> unless the platform maintainer has comments. >> >> If you already ran DT checks and didn't see these error(s), then >> make sure dt-schema is up to date: >> >> pip3 install dtschema --upgrade >> >> >> New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjefferson.dtb' for 20241014105031.1963079-1-chanh@os.amperecomputing.com: >> >> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed: >> 'ampere,mtjefferson-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc'] >> 'ampere,mtjefferson-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc'] >> 'ampere,mtjefferson-bmc' is not one of ['ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc'] >> 'aspeed,ast2400' was expected >> 'aspeed,ast2500' was expected >> from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# >> > > This needs to be fixed as pointed out by Krzysztof. > Thank Andrew, I'll update that in patch v2 > *snip* > >> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@58: failed to match any schema with compatible: ['pmbus'] >> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb/bus@1e78a000/i2c@180/i2c-mux@70/i2c@0/psu@59: failed to match any schema with compatible: ['pmbus'] > > These two should also be fixed. The compatible must describe the > physical device, not the communication/application protocol. It may be > necessary to add a binding if there's not one already for the device. > Hi Andrew, My device is following the pmbus specification. So I'm using the generic pmbus driver (https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/hwmon/pmbus/pmbus.c#n237) to probe my device. In arch/arm/boot/dts/aspeed/ directory, many boards are also using this compatible to probe our devices. https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts#n219 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts#n263 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts#n260 Andrew, Recently I saw the ASPEED platform's maintainer accept the "pmbus" compatible with a warning log. You can see in the below list that patches were merged recently. https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=bb3776e564d2190db0ef45609e66f13c60ce5b48 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=28cfb03afcb20a841e96e821ba20870a7c437034 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=36d96827f480e90037d162098061333e279ea35f Regards, Chanh Ng > Andrew >
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index c4f064e4b073..b1fb0853a789 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-amd-daytonax.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ + aspeed-bmc-ampere-mtjefferson.dtb \ aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts new file mode 100644 index 000000000000..f24111ab9e65 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts @@ -0,0 +1,646 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright 2024 Ampere Computing LLC. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jefferson BMC"; + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; + + aliases { + i2c20 = &i2c4_bus70_chn0; + i2c22 = &i2c4_bus70_chn2; + i2c24 = &i2c2_bus70_chn0; + + /* + * I2C OCP alias port + */ + i2c30 = &ocpslot; + + /* + * I2C NVMe alias port + */ + i2c48 = &nvmeslot_0; + i2c49 = &nvmeslot_1; + i2c50 = &nvmeslot_2; + i2c51 = &nvmeslot_3; + i2c52 = &nvmeslot_4; + i2c53 = &nvmeslot_5; + i2c54 = &nvmeslot_6; + i2c55 = &nvmeslot_7; + i2c56 = &nvmeslot_8; + i2c57 = &nvmeslot_9; + i2c58 = &nvmeslot_10; + i2c59 = &nvmeslot_11; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + voltage_mon_reg: voltage-mon-regulator { + compatible = "regulator-fixed"; + regulator-name = "ltc2497_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, + <&adc_i2c_2 0>, <&adc_i2c_2 1>, + <&adc_i2c_2 2>, <&adc_i2c_2 3>, + <&adc_i2c_2 4>, <&adc_i2c_2 5>, + <&adc_i2c_2 6>, <&adc_i2c_2 7>, + <&adc_i2c_2 8>, <&adc_i2c_2 9>, + <&adc_i2c_2 10>, <&adc_i2c_2 11>, + <&adc_i2c_2 12>, <&adc_i2c_2 13>, + <&adc_i2c_2 14>, <&adc_i2c_2 15>, + <&adc_i2c_0 0>, <&adc_i2c_0 1>, + <&adc_i2c_0 2>, <&adc_i2c_0 3>, + <&adc_i2c_0 4>, <&adc_i2c_0 5>, + <&adc_i2c_0 6>, <&adc_i2c_0 7>, + <&adc_i2c_0 8>, <&adc_i2c_0 9>, + <&adc_i2c_0 10>, <&adc_i2c_0 11>, + <&adc_i2c_0 12>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <20000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c2_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; + bus-frequency = <1000000>; + multi-master; + mctp-controller; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c4 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c4_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + pagesize = <32>; + }; + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + temperature-sensor@4a{ + compatible = "ti,tmp75"; + reg = <0x4a>; + }; + temperature-sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + status = "disabled"; + }; + channel@2 { + reg = <0x2>; + status = "disabled"; + }; + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + channel@4 { + reg = <0x4>; + }; + }; + temperature-sensor@4d { + compatible = "ti,tmp75"; + reg = <0x4d>; + }; + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + temperature-sensor@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + }; + adc_i2c_0: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + + i2c4_bus70_chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + adc_i2c_2: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + nvmeslot_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + nvmeslot_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c-mux-idle-disconnect; + + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + }; + }; + }; + + nvmeslot_0: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_1: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_2: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_3: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; +}; + +&i2c8 { + status = "okay"; + + fan-controller@5c { + compatible = "onnn,adt7462"; + reg = <0x5c>; + }; +}; + +&i2c9 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + temperature-sensor@18 { + compatible = "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + temperature-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c14 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + bmc_ast2600_cpu: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "presence-ocp1","presence-ocp2", + "","", + "","", + "","", + "","", + "","", + "","", + "",""; + }; +}; + +&adc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n", + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete", + "chassis-id-sel", + /*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel", + "spd-sel", + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", + "","","","", + /*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","", + /*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control", + "cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","", + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr", + "led-fp-sta-amb", + /*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","", + "","", + /*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","reset-button","","","", + /*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock", + "","","", + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", + "jtag-dbgr-prsnt-n","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n", + "led-bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n", + "host0-shd-ack-n","s0-overtemp-n", + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot", + /*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; + +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel", + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", + "","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","",""; +};
The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson hardware reference platform with AmpereOne(TM)M processor. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ 2 files changed, 647 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts