diff mbox series

[v4,1/2] arm64: dts: rockchip: Add rk3588-orangepi-5b device tree and refactor

Message ID 20241014113026.78853-1-cenk.uluisik@googlemail.com (mailing list archive)
State New
Headers show
Series [v4,1/2] arm64: dts: rockchip: Add rk3588-orangepi-5b device tree and refactor | expand

Commit Message

Cenk Uluisik Oct. 14, 2024, 11:29 a.m. UTC
Implements a slightly modified rk3588s-orangepi-5b.dts
from the vendor. Unfortunately the &wireless_bluetooth
and &wireless_wlan are not implemented yet.

Bigger parts of the rk3588s-orangepi-5.dts file were
moved into a new rk3588s-orangepi-5.dtsi file, so
that both device trees from the orangepi-5 and 5b
include from it and avoid including from the .dts.

This changes the Orange Pi 5's sdmmc alias to be mmc1,
breaking existing users if they used the /dev/mmc0 device
file, so it's consistent with all the other rk3588 DTS,
which, is also the new default that rockchip wants to use.
https://github.com/orangepi-xunlong/linux-orangepi/commit/bce92d16b230b8e93c2831fb7768839fd7bbab04
Therefore also add the sdhc alias to be mmc0 on the
rk3588s-orangepi-5b.dts.

How does this board differ from the original Orange Pi 5?
  - the Orange Pi 5 has a M.2 NVMe M-key PCI 2.0x1
    slot (hooked to combphy0_ps) whereas the Orange Pi 5b uses combphy0_ps
    for the WiFi.
  - The Orange Pi 5 with the M.2 socket has a regulator defined hooked to
    "GPIO0_C5" (i.e. PCIE_PWREN_H) whereas the Orange Pi 5B has GPIO0_C5
    hooked to BT_WAKE_HOST.
  - builtin eMMC storage
  - no SPI NOR flash (u-boot, preboot etc. initiates
      from within the eMMC
      storage)
  - ap6275p Wifi module (like the Orange Pi 5 Plus)
  - builtin BlueTooth module

Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 798 +-----------------
 ...orangepi-5.dts => rk3588s-orangepi-5.dtsi} |  36 +-
 .../boot/dts/rockchip/rk3588s-orangepi-5b.dts |  27 +
 4 files changed, 73 insertions(+), 789 deletions(-)
 rewrite arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts (95%)
 copy arch/arm64/boot/dts/rockchip/{rk3588s-orangepi-5.dts => rk3588s-orangepi-5.dtsi} (96%)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts

Comments

Rob Herring Oct. 14, 2024, 2:05 p.m. UTC | #1
On Mon, 14 Oct 2024 13:29:55 +0200, Cenk Uluisik wrote:
> Implements a slightly modified rk3588s-orangepi-5b.dts
> from the vendor. Unfortunately the &wireless_bluetooth
> and &wireless_wlan are not implemented yet.
> 
> Bigger parts of the rk3588s-orangepi-5.dts file were
> moved into a new rk3588s-orangepi-5.dtsi file, so
> that both device trees from the orangepi-5 and 5b
> include from it and avoid including from the .dts.
> 
> This changes the Orange Pi 5's sdmmc alias to be mmc1,
> breaking existing users if they used the /dev/mmc0 device
> file, so it's consistent with all the other rk3588 DTS,
> which, is also the new default that rockchip wants to use.
> https://github.com/orangepi-xunlong/linux-orangepi/commit/bce92d16b230b8e93c2831fb7768839fd7bbab04
> Therefore also add the sdhc alias to be mmc0 on the
> rk3588s-orangepi-5b.dts.
> 
> How does this board differ from the original Orange Pi 5?
>   - the Orange Pi 5 has a M.2 NVMe M-key PCI 2.0x1
>     slot (hooked to combphy0_ps) whereas the Orange Pi 5b uses combphy0_ps
>     for the WiFi.
>   - The Orange Pi 5 with the M.2 socket has a regulator defined hooked to
>     "GPIO0_C5" (i.e. PCIE_PWREN_H) whereas the Orange Pi 5B has GPIO0_C5
>     hooked to BT_WAKE_HOST.
>   - builtin eMMC storage
>   - no SPI NOR flash (u-boot, preboot etc. initiates
>       from within the eMMC
>       storage)
>   - ap6275p Wifi module (like the Orange Pi 5 Plus)
>   - builtin BlueTooth module
> 
> Signed-off-by: Cenk Uluisik <cenk.uluisik@googlemail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 798 +-----------------
>  ...orangepi-5.dts => rk3588s-orangepi-5.dtsi} |  36 +-
>  .../boot/dts/rockchip/rk3588s-orangepi-5b.dts |  27 +
>  4 files changed, 73 insertions(+), 789 deletions(-)
>  rewrite arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts (95%)
>  copy arch/arm64/boot/dts/rockchip/{rk3588s-orangepi-5.dts => rk3588s-orangepi-5.dtsi} (96%)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-orangepi-5.dtb rockchip/rk3588s-orangepi-5b.dtb' for 20241014113026.78853-1-cenk.uluisik@googlemail.com:

arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dtb: gpio-func: leds-gpio: {'rockchip,pins': [[0, 2, 0, 245]], 'phandle': 253} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dtb: vcc-3v3-sd-s0-regulator: Unevaluated properties are not allowed ('enable-active-low' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
Jimmy Hon Oct. 14, 2024, 5:38 p.m. UTC | #2
> New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-orangepi-5.dtb rockchip/rk3588s-orangepi-5b.dtb' for 20241014113026.78853-1-cenk.uluisik@googlemail.com:
>
> arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dtb: gpio-func: leds-gpio: {'rockchip,pins': [[0, 2, 0, 245]], 'phandle': 253} is not of type 'array'
>         from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
Regarding the "leds-gpio" warning, DTS checking script might not like
that id. You could probably avoid it by naming it "green-led". Similar
to what the Orange Pi 5 Plus does. This would be a separate bugfix
commit before any of the other changes in this series.

> arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dtb: vcc-3v3-sd-s0-regulator: Unevaluated properties are not allowed ('enable-active-low' was unexpected)
>         from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
The enable-active-low has already been addressed in
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=v6.12-armsoc/dtsfixes&id=f4d29bebaa6118c1e51e8f1c21ce2b34f43e1479
So you can avoid the error if you start with v6.12-armsoc as your baseline.

Regarding the "leds-gpio" warning, DTS checking script might not like
that id. You could probably avoid it by naming it "green-led". Similar
to what the Orange Pi 5 Plus does. This would be a separate bugfix
commit before any of the other changes.

Jimmy
Jimmy Hon Oct. 14, 2024, 5:52 p.m. UTC | #3
> +&sdhci {
> +       bus-width = <8>;
> +       no-sdio;
> +       no-sd;
> +       non-removable;
> +       max-frequency = <200000000>;
> +       mmc-hs400-1_8v;
> +       mmc-hs400-enhanced-strobe;
> +       status = "disabled";
> +};
This is good. SDHCI is disabled by default, so just the Orange Pi 5B
board can enable it.

>  &sfc {
>         pinctrl-names = "default";
>         pinctrl-0 = <&fspim0_pins>;
> -       status = "okay";
> +       status = "disabled";
This is good. SFC is disabled by default, so just the Orange Pi 5
board can enable it.

> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> new file mode 100644
> index 000000000000..55eee855cacc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> @@ -0,0 +1,27 @@
> +
> +&sfc {
> +       status = "disabled";
> +};
Since this is disabled by default. So this is now redundant and should
be removed.

> +
> +&pcie2x1l2 {
> +       reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> +       status = "okay";
> +};
Do you want to defer this part for now, and include this with WiFi enablement?
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 09423070c992..45249ce15175 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -154,3 +154,4 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
dissimilarity index 95%
index feea6b20a6bf..9c0d1348281b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -1,766 +1,32 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3588s.dtsi"
-
-/ {
-	model = "Xunlong Orange Pi 5";
-	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
-
-	aliases {
-		ethernet0 = &gmac1;
-		mmc0 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <1800>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_gpio>;
-
-		led-1 {
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
-			label = "status_led";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vbus_typec: vbus-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&typec5v_pwren>;
-		regulator-name = "vbus_typec";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
-		compatible = "regulator-fixed";
-		enable-active-low;
-		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
-		regulator-name = "vcc_3v3_sd_s0";
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc3v3_pcie20: vcc3v3-pcie20-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_pcie20";
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy2_psu {
-	status = "okay";
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gmac1 {
-	clock_in_out = "output";
-	phy-handle = <&rgmii_phy1>;
-	phy-mode = "rgmii-rxid";
-	pinctrl-0 = <&gmac1_miim
-		     &gmac1_tx_bus2
-		     &gmac1_rx_bus2
-		     &gmac1_rgmii_clk
-		     &gmac1_rgmii_bus>;
-	pinctrl-names = "default";
-	tx_delay = <0x42>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu_s0>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	vdd_npu_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_npu_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <950000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6m3_xfer>;
-	status = "okay";
-
-	usbc0: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usbc0_int>;
-		vbus-supply = <&vbus_typec>;
-		status = "okay";
-
-		usb_con: connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			data-role = "dual";
-			op-sink-microwatt = <1000000>;
-			power-role = "dual";
-			sink-pdos =
-				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
-			source-pdos =
-				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			try-power-role = "source";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					usbc0_hs: endpoint {
-						remote-endpoint = <&usb_host0_xhci_drd_sw>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					usbc0_ss: endpoint {
-						remote-endpoint = <&usbdp_phy0_typec_ss>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					usbc0_sbu: endpoint {
-						remote-endpoint = <&usbdp_phy0_typec_sbu>;
-					};
-				};
-			};
-		};
-	};
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-source;
-	};
-};
-
-&mdio1 {
-	rgmii_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x1>;
-		reset-assert-us = <20000>;
-		reset-deassert-us = <100000>;
-		reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pcie2x1l2 {
-	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie20>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio-func {
-		leds_gpio: leds-gpio {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		usbc0_int: usbc0-int {
-			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		typec5v_pwren: typec5v-pwren {
-			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&saradc {
-	vref-supply = <&avcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	disable-wp;
-	max-frequency = <150000000>;
-	no-mmc;
-	no-sdio;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_sd_s0>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
-};
-
-&sfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&fspim0_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-max-frequency = <100000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&spi2 {
-	status = "okay";
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	num-cs = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		reg = <0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
-		spi-max-frequency = <1000000>;
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vcc_1v1_nldo_s3>;
-		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
-		};
-
-		regulators {
-			vdd_gpu_s0: dcdc-reg1 {
-				regulator-name = "vdd_gpu_s0";
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-enable-ramp-delay = <400>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: dcdc-reg2 {
-				regulator-name = "vdd_cpu_lit_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-name = "vdd_log_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: dcdc-reg4 {
-				regulator-name = "vdd_vdenc_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-name = "vdd_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
-				regulator-name = "vdd2_ddr_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-max-microvolt = <1100000>;
-				regulator-min-microvolt = <1100000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-name = "vdd_2v0_pldo_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-name = "vcc_3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-name = "vddq_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-name = "vcc_1v8_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-name = "avcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-name = "vcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-name = "avdd_1v2_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-name = "vcc_3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-name = "vccio_sd_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-name = "pldo6_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-name = "vdd_0v75_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-name = "vdd_ddr_pll_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-name = "avdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-name = "vdd_0v85_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-name = "vdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&u2phy0_otg {
-	status = "okay";
-};
-
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	status = "okay";
-};
-
-&u2phy3 {
-	status = "okay";
-};
-
-&u2phy3_host {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-&usbdp_phy0 {
-	mode-switch;
-	orientation-switch;
-	sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
-	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbdp_phy0_typec_ss: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&usbc0_ss>;
-		};
-
-		usbdp_phy0_typec_sbu: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&usbc0_sbu>;
-		};
-	};
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host0_xhci {
-	dr_mode = "otg";
-	usb-role-switch;
-	status = "okay";
-
-	port {
-		usb_host0_xhci_drd_sw: endpoint {
-			remote-endpoint = <&usbc0_hs>;
-		};
-	};
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usb_host2_xhci {
-	status = "okay";
-};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5";
+	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+
+	vcc3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie20";
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&sfc {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
similarity index 96%
copy from arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
copy to arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index feea6b20a6bf..6436703a94f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -10,12 +10,9 @@ 
 #include "rk3588s.dtsi"
 
 / {
-	model = "Xunlong Orange Pi 5";
-	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
-
 	aliases {
 		ethernet0 = &gmac1;
-		mmc0 = &sdmmc;
+		mmc1 = &sdmmc;
 	};
 
 	chosen {
@@ -79,18 +76,6 @@  vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_s3>;
 	};
-
-	vcc3v3_pcie20: vcc3v3-pcie20-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_pcie20";
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
 };
 
 &combphy0_ps {
@@ -291,12 +276,6 @@  rgmii_phy1: ethernet-phy@1 {
 	};
 };
 
-&pcie2x1l2 {
-	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie20>;
-	status = "okay";
-};
-
 &pinctrl {
 	gpio-func {
 		leds_gpio: leds-gpio {
@@ -326,6 +305,17 @@  &saradc {
 	status = "okay";
 };
 
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "disabled";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -342,7 +332,7 @@  &sdmmc {
 &sfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&fspim0_pins>;
-	status = "okay";
+	status = "disabled";
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
new file mode 100644
index 000000000000..55eee855cacc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
@@ -0,0 +1,27 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5B";
+	compatible = "xunlong,orangepi-5b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&sfc {
+	status = "disabled";
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};