diff mbox series

[RFC,nand/next,3/4] include: mtd: spinand: Add CASN page related macros and flags.

Message ID 20241020132722.20565-4-SkyLake.Huang@mediatek.com (mailing list archive)
State New
Headers show
Series mtd: nand: spi: Add CASN page support | expand

Commit Message

Sky Huang Oct. 20, 2024, 1:27 p.m. UTC 
From: "Sky Huang" <skylake.huang@mediatek.com>

This patch adds SPINAND CASN page manipulation macros for
SPI-NAND driver to use. Also, some important flag bits, like
SPINAND_SUPR_CR(continuous read), are added to show the
SPI-NAND device's capability.

Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
---
 include/linux/mtd/spinand.h | 100 +++++++++++++++++++++++++++++++++++-
 1 file changed, 98 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 702e5fb13dae..de97994c357b 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -62,6 +62,59 @@ 
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+/* Macros for CASN */
+#define SPINAND_CASN_PAGE_READ_FROM_CACHE_OP(fast, naddr, addr, ndummy, buf, len) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 1),			\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),			\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
+#define SPINAND_CASN_PAGE_READ_FROM_CACHE_X2_OP(naddr, addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),			\
+		   SPI_MEM_OP_ADDR(naddr, addr, 1),			\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),			\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_CASN_PAGE_READ_FROM_CACHE_DUALIO_OP(naddr, addr, ndummy, buf, len)	\
+		SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),			\
+			   SPI_MEM_OP_ADDR(naddr, addr, 2),			\
+			   SPI_MEM_OP_DUMMY(ndummy, 2),			\
+			   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_CASN_PAGE_READ_FROM_CACHE_X4_OP(naddr, addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
+		   SPI_MEM_OP_ADDR(naddr, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_CASN_PAGE_READ_FROM_CACHE_QUADIO_OP(naddr, addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
+		   SPI_MEM_OP_ADDR(naddr, addr, 4),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_CASN_PROG_LOAD(reset, naddr, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 1))
+
+#define SPINAND_CASN_PROG_LOAD_X4(reset, naddr, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1),		\
+		   SPI_MEM_OP_ADDR(naddr, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 4))
+
+#define SPINAND_CASN_ADVECC_OP(casn_adv_ecc_status, buf)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(casn_adv_ecc_status.cmd, 1),			\
+		   SPI_MEM_OP_ADDR(casn_adv_ecc_status.addr_nbytes,		\
+				   casn_adv_ecc_status.addr,			\
+				   casn_adv_ecc_status.addr_buswidth),		\
+		   SPI_MEM_OP_DUMMY(casn_adv_ecc_status.dummy_nbytes,		\
+				    casn_adv_ecc_status.dummy_buswidth),	\
+		   SPI_MEM_OP_DATA_IN(casn_adv_ecc_status.status_nbytes, buf, 1))
+/* Macros for CASN end */
+
 #define SPINAND_PAGE_READ_FROM_CACHE_OP(fast, addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
@@ -312,8 +365,11 @@  struct spinand_ecc_info {
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
 #define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
-#define SPINAND_HAS_PROG_PLANE_SELECT_BIT		BIT(2)
-#define SPINAND_HAS_READ_PLANE_SELECT_BIT		BIT(3)
+#define SPINAND_SUP_CR			BIT(2)
+#define SPINAND_SUP_ON_DIE_ECC		BIT(3)
+#define SPINAND_SUP_LEGACY_ECC_STATUS	BIT(4)
+#define SPINAND_SUP_ADV_ECC_STATUS	BIT(5)
+#define SPINAND_ECC_PARITY_READABLE	BIT(6)
 
 /**
  * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure
@@ -406,6 +462,28 @@  struct spinand_dirmap {
 	struct spi_mem_dirmap_desc *rdesc_ecc;
 };
 
+/**
+ * struct CASN_ADVECC - CASN's advanced ECC description
+ * @cmd: Command to access SPI-NAND on-chip ECC status registers
+ * @mask: Mask to access SPI-NAND on-chip ECC status registers.
+ *	  ADV_ECC_STATUS->status_nbytes | CASN_ADVECC->mask
+ *			1		|      0 to 0xff
+ *			2		|     0 to 0xffff
+ * @shift: How many bits to shift to get on-chip ECC status
+ * @pre_op: This comes from CASN page's ADV_ECC_STATUS's pre_op.
+ *	    After reading on-chip ECC status, we need to do some math
+ *	    operations if this is specified.
+ * @pre_mask: This comes from CASN page's ADV_ECC_STATUS's pre_mask.
+ *	      This is used in companion with pre_op above.
+ */
+struct CASN_ADVECC {
+	u8 cmd;
+	u16 mask;
+	u8 shift;
+	u8 pre_op;
+	u8 pre_mask;
+};
+
 /**
  * struct spinand_device - SPI NAND device instance
  * @base: NAND device instance
@@ -464,6 +542,23 @@  struct spinand_device {
 	u8 *oobbuf;
 	u8 *scratchbuf;
 	const struct spinand_manufacturer *manufacturer;
+
+	bool use_casn;
+	struct nand_casn *casn;
+	struct spi_mem_op *advecc_high_ops; /* ops to read higher part of advanced ECC status*/
+	struct spi_mem_op *advecc_low_ops;
+	struct CASN_OOB *casn_oob;
+	struct CASN_ADVECC *advecc_high;
+	struct CASN_ADVECC *advecc_low;
+
+	u8 advecc_low_bitcnt;
+	u8 advecc_noerr_status;
+	u8 advecc_uncor_status;
+	u8 advecc_post_op;
+	u8 advecc_post_mask;
+
+	size_t (*eccsr_math_op[4])(size_t, size_t);
+
 	void *priv;
 
 	bool cont_read_possible;
@@ -539,3 +634,4 @@  int spinand_write_reg_op(struct spinand_device *spinand, u8 reg, u8 val);
 int spinand_select_target(struct spinand_device *spinand, unsigned int target);
 
 #endif /* __LINUX_MTD_SPINAND_H */
+