| Message ID | 20241022-add_initial_support_for_qcs615-v4-7-0a551c6dd342@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add initial support for QCS615 SoC and QCS615 RIDE board | expand |
On Tue, Oct 22, 2024 at 04:54:35PM GMT, Lijuan Gao wrote: > Enable clock controller, interconnect and pinctrl for Qualcomm > QCS615 platform to boot to UART console. > > The serial engine depends on gcc, interconnect and pinctrl. Since > the serial console driver is only available as built-in, so these > configs needs be built-in for the UART device to probe and register > the console. > I love the fact that you're describing the reason for making these built-in, and in such a clear way. It therefor saddens me to say that there's more to it... A builtin driver with module dependencies will through device links and probe deferral be probed once those resources are available, so this isn't the reason for us to mark these providers as built-in. Instead what we're looking for is the fact that we want the console to be registered before we launch userspace (and thereby load modules). The main reason for this is that e.g. systemd opens /dev/console at launch (i.e. when the init process starts). So if we registers the console after this, we will not get the console output from systemd. So, please rephrase this to state that we want these built-in, because the serial console driver depends on them and we want that registered before we launch userspace. Regards, Bjorn > Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> > --- > arch/arm64/configs/defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 36b33b9f1704..fd0dfa9ebae0 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -607,6 +607,7 @@ CONFIG_PINCTRL_MSM8996=y > CONFIG_PINCTRL_MSM8998=y > CONFIG_PINCTRL_QCM2290=y > CONFIG_PINCTRL_QCS404=y > +CONFIG_PINCTRL_QCS615=y > CONFIG_PINCTRL_QDF2XXX=y > CONFIG_PINCTRL_QDU1000=y > CONFIG_PINCTRL_SA8775P=y > @@ -1323,6 +1324,7 @@ CONFIG_MSM_MMCC_8998=m > CONFIG_QCM_GCC_2290=y > CONFIG_QCM_DISPCC_2290=m > CONFIG_QCS_GCC_404=y > +CONFIG_QCS_GCC_615=y > CONFIG_SC_CAMCC_7280=m > CONFIG_QDU_GCC_1000=y > CONFIG_SC_CAMCC_8280XP=m > @@ -1629,6 +1631,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y > CONFIG_INTERCONNECT_QCOM_OSM_L3=m > CONFIG_INTERCONNECT_QCOM_QCM2290=y > CONFIG_INTERCONNECT_QCOM_QCS404=m > +CONFIG_INTERCONNECT_QCOM_QCS615=y > CONFIG_INTERCONNECT_QCOM_QDU1000=y > CONFIG_INTERCONNECT_QCOM_SA8775P=y > CONFIG_INTERCONNECT_QCOM_SC7180=y > > -- > 2.46.0 >
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 36b33b9f1704..fd0dfa9ebae0 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -607,6 +607,7 @@ CONFIG_PINCTRL_MSM8996=y CONFIG_PINCTRL_MSM8998=y CONFIG_PINCTRL_QCM2290=y CONFIG_PINCTRL_QCS404=y +CONFIG_PINCTRL_QCS615=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QDU1000=y CONFIG_PINCTRL_SA8775P=y @@ -1323,6 +1324,7 @@ CONFIG_MSM_MMCC_8998=m CONFIG_QCM_GCC_2290=y CONFIG_QCM_DISPCC_2290=m CONFIG_QCS_GCC_404=y +CONFIG_QCS_GCC_615=y CONFIG_SC_CAMCC_7280=m CONFIG_QDU_GCC_1000=y CONFIG_SC_CAMCC_8280XP=m @@ -1629,6 +1631,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y CONFIG_INTERCONNECT_QCOM_OSM_L3=m CONFIG_INTERCONNECT_QCOM_QCM2290=y CONFIG_INTERCONNECT_QCOM_QCS404=m +CONFIG_INTERCONNECT_QCOM_QCS615=y CONFIG_INTERCONNECT_QCOM_QDU1000=y CONFIG_INTERCONNECT_QCOM_SA8775P=y CONFIG_INTERCONNECT_QCOM_SC7180=y
Enable clock controller, interconnect and pinctrl for Qualcomm QCS615 platform to boot to UART console. The serial engine depends on gcc, interconnect and pinctrl. Since the serial console driver is only available as built-in, so these configs needs be built-in for the UART device to probe and register the console. Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+)