@@ -67,6 +67,28 @@ Write from userspace to set the device mode.
::
$ echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode
+t7xx_debug_ports
+----------------
+The sysfs interface provides userspace with access to enable/disable the debug
+ports, this interface supports read and write operations.
+
+Debug port status:
+
+- ``1`` represents enable debug ports
+- ``0`` represents disable debug ports
+
+Currently supported debug ports (ADB/MIPC).
+
+Read from userspace to get the current debug ports status.
+
+::
+ $ cat /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
+
+Write from userspace to set the debug ports status.
+
+::
+ $ echo 1 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
+
Management application development
==================================
The driver and userspace interfaces are described below. The MBIM protocol is
@@ -139,6 +161,25 @@ Please note that driver needs to be reloaded to export /dev/wwan0fastboot0
port, because device needs a cold reset after enter ``fastboot_switching``
mode.
+ADB port userspace ABI
+----------------------
+
+/dev/wwan0adb0 character device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver exposes a ADB protocol interface by implementing ADB WWAN Port.
+The userspace end of the ADB channel pipe is a /dev/wwan0adb0 character device.
+Application shall use this interface for ADB protocol communication.
+
+MIPC port userspace ABI
+-----------------------
+
+/dev/wwan0mipc0 character device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver exposes a diagnostic interface by implementing MIPC (Modem
+Information Process Center) WWAN Port. The userspace end of the MIPC channel
+pipe is a /dev/wwan0mipc0 character device.
+Application shall use this interface for MTK modem diagnostic communication.
+
The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification.
References
@@ -164,3 +205,9 @@ speak the Mobile Interface Broadband Model (MBIM) protocol"*
[5] *fastboot "a mechanism for communicating with bootloaders"*
- https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md
+
+[6] *ADB (Android Debug Bridge) "a mechanism to keep track of Android devices
+and emulators instances connected to or running on a given host developer
+machine with ADB protocol"*
+
+- https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/main/README.md
@@ -198,6 +198,7 @@ int t7xx_reset_device(struct t7xx_pci_dev *t7xx_dev, enum reset_type type)
pci_save_state(t7xx_dev->pdev);
t7xx_pci_reprobe_early(t7xx_dev);
t7xx_mode_update(t7xx_dev, T7XX_RESET);
+ WRITE_ONCE(t7xx_dev->debug_ports_show, false);
if (type == FLDR) {
ret = t7xx_acpi_reset(t7xx_dev, "_RST");
@@ -41,6 +41,7 @@
#include "t7xx_pcie_mac.h"
#include "t7xx_reg.h"
#include "t7xx_state_monitor.h"
+#include "t7xx_port_proxy.h"
#define T7XX_PCI_IREG_BASE 0
#define T7XX_PCI_EREG_BASE 2
@@ -120,13 +121,58 @@ static ssize_t t7xx_mode_show(struct device *dev,
static DEVICE_ATTR_RW(t7xx_mode);
-static struct attribute *t7xx_mode_attr[] = {
+static ssize_t t7xx_debug_ports_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct t7xx_pci_dev *t7xx_dev;
+ struct pci_dev *pdev;
+ bool show;
+ int ret;
+
+ pdev = to_pci_dev(dev);
+ t7xx_dev = pci_get_drvdata(pdev);
+ if (!t7xx_dev)
+ return -ENODEV;
+
+ ret = kstrtobool(buf, &show);
+ if (ret < 0)
+ return ret;
+
+ t7xx_proxy_debug_ports_show(t7xx_dev, show);
+ WRITE_ONCE(t7xx_dev->debug_ports_show, show);
+
+ return count;
+};
+
+static ssize_t t7xx_debug_ports_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct t7xx_pci_dev *t7xx_dev;
+ struct pci_dev *pdev;
+ bool show;
+
+ pdev = to_pci_dev(dev);
+ t7xx_dev = pci_get_drvdata(pdev);
+ if (!t7xx_dev)
+ return -ENODEV;
+
+ show = READ_ONCE(t7xx_dev->debug_ports_show);
+
+ return sysfs_emit(buf, "%d\n", show);
+}
+
+static DEVICE_ATTR_RW(t7xx_debug_ports);
+
+static struct attribute *t7xx_attr[] = {
&dev_attr_t7xx_mode.attr,
+ &dev_attr_t7xx_debug_ports.attr,
NULL
};
-static const struct attribute_group t7xx_mode_attribute_group = {
- .attrs = t7xx_mode_attr,
+static const struct attribute_group t7xx_attribute_group = {
+ .attrs = t7xx_attr,
};
void t7xx_mode_update(struct t7xx_pci_dev *t7xx_dev, enum t7xx_mode mode)
@@ -839,7 +885,7 @@ static int t7xx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
t7xx_pcie_mac_interrupts_dis(t7xx_dev);
ret = sysfs_create_group(&t7xx_dev->pdev->dev.kobj,
- &t7xx_mode_attribute_group);
+ &t7xx_attribute_group);
if (ret)
goto err_md_exit;
@@ -855,7 +901,7 @@ static int t7xx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_remove_group:
sysfs_remove_group(&t7xx_dev->pdev->dev.kobj,
- &t7xx_mode_attribute_group);
+ &t7xx_attribute_group);
err_md_exit:
t7xx_md_exit(t7xx_dev);
@@ -870,7 +916,7 @@ static void t7xx_pci_remove(struct pci_dev *pdev)
t7xx_dev = pci_get_drvdata(pdev);
sysfs_remove_group(&t7xx_dev->pdev->dev.kobj,
- &t7xx_mode_attribute_group);
+ &t7xx_attribute_group);
t7xx_md_exit(t7xx_dev);
for (i = 0; i < EXT_INT_NUM; i++) {
@@ -94,6 +94,7 @@ struct t7xx_pci_dev {
struct dentry *debugfs_dir;
#endif
u32 mode;
+ bool debug_ports_show;
};
enum t7xx_pm_id {
@@ -42,6 +42,8 @@ enum port_ch {
/* to AP */
PORT_CH_AP_CONTROL_RX = 0x1000,
PORT_CH_AP_CONTROL_TX = 0x1001,
+ PORT_CH_AP_ADB_RX = 0x100a,
+ PORT_CH_AP_ADB_TX = 0x100b,
/* to MD */
PORT_CH_CONTROL_RX = 0x2000,
@@ -100,6 +102,7 @@ struct t7xx_port_conf {
struct port_ops *ops;
char *name;
enum wwan_port_type port_type;
+ bool debug;
};
struct t7xx_port {
@@ -38,7 +38,8 @@
#include "t7xx_state_monitor.h"
#define Q_IDX_CTRL 0
-#define Q_IDX_MBIM 2
+#define Q_IDX_MBIM_MIPC 2
+#define Q_IDX_ADB 3
#define Q_IDX_AT_CMD 5
#define INVALID_SEQ_NUM GENMASK(15, 0)
@@ -66,8 +67,8 @@ static const struct t7xx_port_conf t7xx_port_conf[] = {
}, {
.tx_ch = PORT_CH_MBIM_TX,
.rx_ch = PORT_CH_MBIM_RX,
- .txq_index = Q_IDX_MBIM,
- .rxq_index = Q_IDX_MBIM,
+ .txq_index = Q_IDX_MBIM_MIPC,
+ .rxq_index = Q_IDX_MBIM_MIPC,
.path_id = CLDMA_ID_MD,
.ops = &wwan_sub_port_ops,
.name = "MBIM",
@@ -100,7 +101,27 @@ static const struct t7xx_port_conf t7xx_port_conf[] = {
.path_id = CLDMA_ID_AP,
.ops = &ctl_port_ops,
.name = "t7xx_ap_ctrl",
- },
+ }, {
+ .tx_ch = PORT_CH_AP_ADB_TX,
+ .rx_ch = PORT_CH_AP_ADB_RX,
+ .txq_index = Q_IDX_ADB,
+ .rxq_index = Q_IDX_ADB,
+ .path_id = CLDMA_ID_AP,
+ .ops = &wwan_sub_port_ops,
+ .name = "adb",
+ .port_type = WWAN_PORT_ADB,
+ .debug = true,
+ }, {
+ .tx_ch = PORT_CH_MIPC_TX,
+ .rx_ch = PORT_CH_MIPC_RX,
+ .txq_index = Q_IDX_MBIM_MIPC,
+ .rxq_index = Q_IDX_MBIM_MIPC,
+ .path_id = CLDMA_ID_MD,
+ .ops = &wwan_sub_port_ops,
+ .name = "mipc",
+ .port_type = WWAN_PORT_MIPC,
+ .debug = true,
+ }
};
static const struct t7xx_port_conf t7xx_early_port_conf[] = {
@@ -505,13 +526,33 @@ static void t7xx_proxy_init_all_ports(struct t7xx_modem *md)
spin_lock_init(&port->port_update_lock);
port->chan_enable = false;
- if (port_conf->ops && port_conf->ops->init)
+ if (!port_conf->debug &&
+ port_conf->ops &&
+ port_conf->ops->init)
port_conf->ops->init(port);
}
t7xx_proxy_setup_ch_mapping(port_prox);
}
+void t7xx_proxy_debug_ports_show(struct t7xx_pci_dev *t7xx_dev, bool show)
+{
+ struct port_proxy *port_prox = t7xx_dev->md->port_prox;
+ struct t7xx_port *port;
+ int i;
+
+ for_each_proxy_port(i, port, port_prox) {
+ const struct t7xx_port_conf *port_conf = port->port_conf;
+
+ if (port_conf->debug && port_conf->ops) {
+ if (show && port_conf->ops->init)
+ port_conf->ops->init(port);
+ else if (!show && port_conf->ops->uninit)
+ port_conf->ops->uninit(port);
+ }
+ }
+}
+
void t7xx_port_proxy_set_cfg(struct t7xx_modem *md, enum port_cfg_id cfg_id)
{
struct port_proxy *port_prox = md->port_prox;
@@ -98,6 +98,7 @@ extern struct port_ops ctl_port_ops;
extern struct port_ops t7xx_trace_port_ops;
#endif
+void t7xx_proxy_debug_ports_show(struct t7xx_pci_dev *t7xx_dev, bool show);
void t7xx_port_proxy_reset(struct port_proxy *port_prox);
void t7xx_port_proxy_uninit(struct port_proxy *port_prox);
int t7xx_port_proxy_init(struct t7xx_modem *md);
@@ -169,7 +169,9 @@ static int t7xx_port_wwan_init(struct t7xx_port *port)
{
const struct t7xx_port_conf *port_conf = port->port_conf;
- if (port_conf->port_type == WWAN_PORT_FASTBOOT)
+ if (port_conf->port_type == WWAN_PORT_FASTBOOT ||
+ port_conf->port_type == WWAN_PORT_ADB ||
+ port_conf->port_type == WWAN_PORT_MIPC)
t7xx_port_wwan_create(port);
port->rx_length_th = RX_QUEUE_MAXLEN;
@@ -224,7 +226,9 @@ static void t7xx_port_wwan_md_state_notify(struct t7xx_port *port, unsigned int
{
const struct t7xx_port_conf *port_conf = port->port_conf;
- if (port_conf->port_type == WWAN_PORT_FASTBOOT)
+ if (port_conf->port_type == WWAN_PORT_FASTBOOT ||
+ port_conf->port_type == WWAN_PORT_ADB ||
+ port_conf->port_type == WWAN_PORT_MIPC)
return;
if (state != MD_STATE_READY)
Add support for userspace to enable/disable the debug ports(ADB,MIPC). - ADB port: /dev/wwan0adb0 - MIPC port: /dev/wwan0mipc0 Application can use ADB (Android Debug Bridge) port to implement functions (shell, pull, push ...) by ADB protocol commands. E.g., ADB commands: - A_OPEN: OPEN(local-id, 0, "destination") - A_WRTE: WRITE(local-id, remote-id, "data") - A_OKEY: READY(local-id, remote-id, "") - A_CLSE: CLOSE(local-id, remote-id, "") Link: https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/main/README.md Application can use MIPC (Modem Information Process Center) port to debug antenna tuner or noise profiling through this MTK modem diagnostic interface. By default, debug ports are not exposed, so using the command to enable or disable debug ports. Enable debug ports: - enable: 'echo 1 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports Disable debug ports: - disable: 'echo 0 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> --- v8: * Rename knod t7xx_port_mode to t7xx_debug_ports and update commit messages * Modify the alignment in knod t7xx_debug_ports_store() and t7xx_debug_ports_show() * Separate the column width modification of t7xx.rst into another patch * Rename t7xx_proxy_port_debug() to t7xx_proxy_debug_ports_show() * Modify the port_mode to debug_ports_show in struct t7xx_pci_dev * Modify the Q_IDX_MBIM to Q_IDX_MBIM_MIPC and delete the Q_IDX_MIPC to avoid id name duplications * Modify the conditional check in t7xx_proxy_debug_ports_show() to make port init() and uninit() call safer v7: * Adjust t7xx.rst columns and word spelling in commit message v5: * Modify line length warning in t7xx_proxy_port_debug() v4: * Modify commit message t7xx_mode to t7xx_port_mode v3: * Add sysfs interface t7xx_port_mode * Delete spin_lock_init in t7xx_proxy_port_debug() * Modify document t7xx.rst v2: * Add WWAN ADB and MIPC port --- .../networking/device_drivers/wwan/t7xx.rst | 47 +++++++++++++++ drivers/net/wwan/t7xx/t7xx_modem_ops.c | 1 + drivers/net/wwan/t7xx/t7xx_pci.c | 58 +++++++++++++++++-- drivers/net/wwan/t7xx/t7xx_pci.h | 1 + drivers/net/wwan/t7xx/t7xx_port.h | 3 + drivers/net/wwan/t7xx/t7xx_port_proxy.c | 51 ++++++++++++++-- drivers/net/wwan/t7xx/t7xx_port_proxy.h | 1 + drivers/net/wwan/t7xx/t7xx_port_wwan.c | 8 ++- 8 files changed, 157 insertions(+), 13 deletions(-)