@@ -518,6 +518,29 @@ i2c8: i2c@46040000 {
status = "disabled";
};
+ csi: csi@48020000 {
+ compatible = "st,stm32mp25-csi";
+ reg = <0x48020000 0x2000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc CSI_R>;
+ clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>,
+ <&rcc CK_KER_CSIPHY>;
+ clock-names = "pclk", "txesc", "csi2phy";
+ access-controllers = <&rifsc 86>;
+ status = "disabled";
+ };
+
+ dcmipp: dcmipp@48030000 {
+ compatible = "st,stm32mp25-dcmipp";
+ reg = <0x48030000 0x1000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc DCMIPP_R>;
+ clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
+ clock-names = "kclk", "mclk";
+ access-controllers = <&rifsc 87>;
+ status = "disabled";
+ };
+
sdmmc1: mmc@48220000 {
compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00353180>;
Add nodes describing the csi and dcmipp controllers handling the camera pipeline on the stm32mp25x. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- arch/arm64/boot/dts/st/stm32mp251.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)