@@ -12,17 +12,17 @@ potentially including additional information.
MSIs are distinguished by some combination of:
- The doorbell (the MMIO address written to).
-
+
Devices may be configured by software to write to arbitrary doorbells which
they can address. An MSI controller may feature a number of doorbells.
- The payload (the value written to the doorbell).
-
+
Devices may be configured to write an arbitrary payload chosen by software.
MSI controllers may have restrictions on permitted payloads.
- Sideband information accompanying the write.
-
+
Typically this is neither configurable nor probeable, and depends on the path
taken through the memory system (i.e. it is a property of the combination of
MSI controller and device rather than a property of either in isolation).
@@ -48,7 +48,7 @@ Optional properties:
not encode doorbells or payloads as these can be configured dynamically.
The meaning of the msi-specifier is defined by the device tree binding of
- the specific MSI controller.
+ the specific MSI controller.
MSI clients
@@ -117,7 +117,7 @@ Example
reg = <0x1 0xf00>;
compatible = "vendor-c,some-device";
- /*
+ /*
* Can generate MSIs to either A or B.
*/
msi-parent = <&msi_a>, <&msi_b 0x17>;
@@ -12,7 +12,7 @@ Required properties:
- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
subsequent SoCs remained backwards-compatible with Tegra30, so on
Tegra generations later than Tegra30 the compatible value should
- include "nvidia,tegra30-ictlr".
+ include "nvidia,tegra30-ictlr".
- reg : Specifies base physical address and size of the registers.
Each controller must be described separately (Tegra20 has 4 of them,
whereas Tegra30 and later have 5).
@@ -65,14 +65,14 @@ Following are additional properties:
Valid values are 0 to 7.
This is applicable if FPS source is
selected as FPS0, FPS1 or FPS2.
-
+
- maxim,active-fps-power-down-slot: Sequencing event slot number on which
the regulator get disabled when master
FPS input event set to LOW.
Valid values are 0 to 7.
This is applicable if FPS source is
selected as FPS0, FPS1 or FPS2.
-
+
- maxim,suspend-fps-source: This is same as property
"maxim,active-fps-source" but value
get configured when system enters in
Remove trailing whitespace from devicetree binding documentation files: - regulator/regulator-max77620.txt - interrupt-controller/nvidia,tegra20-ictlr.txt - interrupt-controller/msi.txt No functional changes. Issues detected using checkpatch.pl script. Signed-off-by: Abhinav Saxena <xandfury@gmail.com> --- .../devicetree/bindings/interrupt-controller/msi.txt | 10 +++++----- .../interrupt-controller/nvidia,tegra20-ictlr.txt | 2 +- .../bindings/regulator/regulator-max77620.txt | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-)