@@ -551,7 +551,6 @@ mmu600_pcie: iommu@fc900000 {
<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
#iommu-cells = <1>;
- status = "disabled";
};
mmu600_php: iommu@fcb00000 {
@@ -1641,6 +1640,7 @@ pcie2x1l1: pcie@fe180000 {
linux,pci-domain = <3>;
max-link-speed = <2>;
msi-map = <0x3000 &its0 0x3000 0x1000>;
+ iommu-map = <0x3000 &mmu600_pcie 0x3000 0x1000>;
num-lanes = <1>;
phys = <&combphy2_psu PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
@@ -1692,6 +1692,7 @@ pcie2x1l2: pcie@fe190000 {
linux,pci-domain = <4>;
max-link-speed = <2>;
msi-map = <0x4000 &its0 0x4000 0x1000>;
+ iommu-map = <0x4000 &mmu600_pcie 0x4000 0x1000>;
num-lanes = <1>;
phys = <&combphy0_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
@@ -162,6 +162,7 @@ pcie3x4: pcie@fe150000 {
linux,pci-domain = <0>;
max-link-speed = <3>;
msi-map = <0x0000 &its1 0x0000 0x1000>;
+ iommu-map = <0x0000 &mmu600_pcie 0x0000 0x1000>;
num-lanes = <4>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
@@ -212,6 +213,7 @@ pcie3x4_ep: pcie-ep@fe150000 {
interrupt-names = "sys", "pmc", "msg", "legacy", "err",
"dma0", "dma1", "dma2", "dma3";
max-link-speed = <3>;
+ iommus = <&mmu600_pcie 0x0000>;
num-lanes = <4>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
@@ -248,6 +250,7 @@ pcie3x2: pcie@fe160000 {
linux,pci-domain = <1>;
max-link-speed = <3>;
msi-map = <0x1000 &its1 0x1000 0x1000>;
+ iommu-map = <0x1000 &mmu600_pcie 0x1000 0x1000>;
num-lanes = <2>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
@@ -297,6 +300,7 @@ pcie2x1l0: pcie@fe170000 {
linux,pci-domain = <2>;
max-link-speed = <2>;
msi-map = <0x2000 &its0 0x2000 0x1000>;
+ iommu-map = <0x2000 &mmu600_pcie 0x2000 0x1000>;
num-lanes = <1>;
phys = <&combphy1_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
Commit cd81d3a0695c ("arm64: dts: rockchip: add rk3588 pcie and php IOMMUs") added the rk3588 SoC's pcie IOMMU and php IOMMU as disabled. The mmu600_pcie is connected with the five PCIe controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The five PCIe controllers are: pcie3x4, pcie3x2, pcie2x1l0, pcie2x1l1, pcie2x1l2. pcie3x4 can run in either Root Complex mode or Endpoint mode, the other four PCIe controllers can only run in Root Complex mode. To describe this we thus have six different device nodes in the device tree. A PCIe controller in Root Complex mode needs to specify an iommu-map, such that the device knows how to convert a Requester ID (PCI BDF) to an IOMMU master ID (stream ID). (A PCIe controller in Endpoint mode should use the iommus property, just like a regular device.) If you look at the device tree bindings for msi-map and iommu-map, you can see that the conversion from Requester ID to MSI-specifier data is the same as the conversion from Requester ID to IOMMU specifier data. Thus it is sensible to define the iommu-map property value similar to the msi-map, such that the conversion will be identical. Add the proper iommu device tree properties for these six device nodes connected to the mmu600_pcie, so that we can enable the mmu600_pcie IOMMU. (The mmu600_php IOMMU is not touched, so it is still disabled.) Signed-off-by: Niklas Cassel <cassel@kernel.org> --- Testing done: -pcie2x1l2: Ethernet connected to the pcie2x1l2 works as expected. -pcie3x4: A PCIe endpoint (running the PCI endpoint framework) connected to pcie3x4 can run pcitest.sh without any issues. Modifying the PCI endpoint to DMA to an invalid address gives IOMMU errors (as expected). -pcie3x4_ep: A PCIe root complex (running Linux) connected to pcie3x4_ep can run pcitest.sh without any issues. Modifying the PCI endpoint's inbound address translation to point to a buffer that has not been mapped using the DMA API, results in IOMMU errors when the RC writes to the PCI BARs exposed by the endpoint (as expected). -My board does not expose a convenient method to test the other PCIe controllers, but considering that the ones that I did test worked fine, I do not see any reason why the others should not do the same. arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 3 ++- arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-)