@@ -131,4 +131,9 @@ config PINCTRL_SUN50I_H616_R
default ARM64 && ARCH_SUNXI
select PINCTRL_SUNXI
+config PINCTRL_SUN55I_A523
+ bool "Support for the Allwinner A523 PIO"
+ default ARM64 && ARCH_SUNXI
+ select PINCTRL_SUNXI
+
endif
@@ -27,5 +27,6 @@ obj-$(CONFIG_PINCTRL_SUN50I_H6) += pinctrl-sun50i-h6.o
obj-$(CONFIG_PINCTRL_SUN50I_H6_R) += pinctrl-sun50i-h6-r.o
obj-$(CONFIG_PINCTRL_SUN50I_H616) += pinctrl-sun50i-h616.o
obj-$(CONFIG_PINCTRL_SUN50I_H616_R) += pinctrl-sun50i-h616-r.o
+obj-$(CONFIG_PINCTRL_SUN55I_A523) += pinctrl-sun55i-a523.o
obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o
new file mode 100644
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner A523 SoC pinctrl driver.
+ *
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const u8 a523_nr_bank_pins[SUNXI_PINCTRL_MAX_BANKS] =
+/* PA PB PC PD PE PF PG PH PI PJ PK */
+ { 0, 15, 17, 24, 16, 7, 15, 20, 17, 18, 24 };
+
+static const unsigned int a523_irq_bank_map[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
+
+static const u8 a523_irq_bank_muxes[SUNXI_PINCTRL_MAX_BANKS] =
+/* PA PB PC PD PE PF PG PH PI PJ PK */
+ { 0, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14};
+
+static struct sunxi_pinctrl_desc a523_pinctrl_data = {
+ .irq_banks = ARRAY_SIZE(a523_irq_bank_map),
+ .irq_bank_map = a523_irq_bank_map,
+ .irq_read_needs_mux = true,
+ .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
+};
+
+static int a523_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_dt_table_init(pdev, a523_nr_bank_pins,
+ a523_irq_bank_muxes,
+ &a523_pinctrl_data,
+ SUNXI_PINCTRL_NEW_REG_LAYOUT |
+ SUNXI_PINCTRL_ELEVEN_BANKS);
+}
+
+static const struct of_device_id a523_pinctrl_match[] = {
+ { .compatible = "allwinner,sun55i-a523-pinctrl", },
+ {}
+};
+
+static struct platform_driver a523_pinctrl_driver = {
+ .probe = a523_pinctrl_probe,
+ .driver = {
+ .name = "sun55i-a523-pinctrl",
+ .of_match_table = a523_pinctrl_match,
+ },
+};
+builtin_platform_driver(a523_pinctrl_driver);
The Allwinner A523 contains pins in 10 out of the 11 possible pin banks; it just skips port A. Use the newly introduced DT based pinctrl driver to describe just the generic pinctrl properties, so advertise the number of pins per bank and the interrupt capabilities. The actual function/mux assignment is taken from the devicetree. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/pinctrl/sunxi/Kconfig | 5 ++ drivers/pinctrl/sunxi/Makefile | 1 + drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c | 54 +++++++++++++++++++++ 3 files changed, 60 insertions(+) create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c