diff mbox series

[net-next,v2,1/8] net: sparx5: do some preparation work

Message ID 20241113-sparx5-lan969x-switch-driver-4-v2-1-0db98ac096d1@microchip.com (mailing list archive)
State New
Headers show
Series net: lan969x: add RGMII support | expand

Commit Message

Daniel Machon Nov. 13, 2024, 9:11 p.m. UTC 
The sparx5_port_init() does initial configuration of a variety of
different features and options for each port. Some are shared for all
types of devices, some are not. As it is now, common configuration is
done after configuration of low-speed devices. This will not work when
adding RGMII support in a subsequent patch.

In preparation for lan969x RGMII support, move a block of code, that
configures 2g5 devices, down. This ensures that the configuration common
to all devices is done before configuration of 2g5, 5g, 10g and 25g
devices.

Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
 .../net/ethernet/microchip/sparx5/sparx5_port.c    | 36 +++++++++++-----------
 1 file changed, 18 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
index 1401761c6251..c929b2a63386 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -1067,24 +1067,6 @@  int sparx5_port_init(struct sparx5 *sparx5,
 	if (err)
 		return err;
 
-	/* Configure MAC vlan awareness */
-	err = sparx5_port_max_tags_set(sparx5, port);
-	if (err)
-		return err;
-
-	/* Set Max Length */
-	spx5_rmw(DEV2G5_MAC_MAXLEN_CFG_MAX_LEN_SET(ETH_MAXLEN),
-		 DEV2G5_MAC_MAXLEN_CFG_MAX_LEN,
-		 sparx5,
-		 DEV2G5_MAC_MAXLEN_CFG(port->portno));
-
-	/* 1G/2G5: Signal Detect configuration */
-	spx5_wr(DEV2G5_PCS1G_SD_CFG_SD_POL_SET(sd_pol) |
-		DEV2G5_PCS1G_SD_CFG_SD_SEL_SET(sd_sel) |
-		DEV2G5_PCS1G_SD_CFG_SD_ENA_SET(sd_ena),
-		sparx5,
-		DEV2G5_PCS1G_SD_CFG(port->portno));
-
 	/* Set Pause WM hysteresis */
 	spx5_rmw(QSYS_PAUSE_CFG_PAUSE_START_SET(pause_start) |
 		 QSYS_PAUSE_CFG_PAUSE_STOP_SET(pause_stop) |
@@ -1108,6 +1090,24 @@  int sparx5_port_init(struct sparx5 *sparx5,
 		 ANA_CL_FILTER_CTRL_FILTER_SMAC_MC_DIS,
 		 sparx5, ANA_CL_FILTER_CTRL(port->portno));
 
+	/* Configure MAC vlan awareness */
+	err = sparx5_port_max_tags_set(sparx5, port);
+	if (err)
+		return err;
+
+	/* Set Max Length */
+	spx5_rmw(DEV2G5_MAC_MAXLEN_CFG_MAX_LEN_SET(ETH_MAXLEN),
+		 DEV2G5_MAC_MAXLEN_CFG_MAX_LEN,
+		 sparx5,
+		 DEV2G5_MAC_MAXLEN_CFG(port->portno));
+
+	/* 1G/2G5: Signal Detect configuration */
+	spx5_wr(DEV2G5_PCS1G_SD_CFG_SD_POL_SET(sd_pol) |
+		DEV2G5_PCS1G_SD_CFG_SD_SEL_SET(sd_sel) |
+		DEV2G5_PCS1G_SD_CFG_SD_ENA_SET(sd_ena),
+		sparx5,
+		DEV2G5_PCS1G_SD_CFG(port->portno));
+
 	if (conf->portmode == PHY_INTERFACE_MODE_QSGMII ||
 	    conf->portmode == PHY_INTERFACE_MODE_SGMII) {
 		err = sparx5_serdes_set(sparx5, port, conf);