@@ -988,7 +988,6 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AC100=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
@@ -1190,7 +1190,6 @@ CONFIG_EDAC_GHES=y
CONFIG_EDAC_LAYERSCAPE=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_ISL1208=m
@@ -316,17 +316,6 @@ config RTC_DRV_DS1672
This driver can also be built as a module. If so, the module
will be called rtc-ds1672.
-config RTC_DRV_HYM8563
- tristate "Haoyu Microelectronics HYM8563"
- depends on OF
- help
- Say Y to enable support for the HYM8563 I2C RTC chip. Apart
- from the usual rtc functions it provides a clock output of
- up to 32kHz.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-hym8563.
-
config RTC_DRV_LP8788
tristate "TI LP8788 RTC driver"
depends on MFD_LP8788
@@ -73,7 +73,6 @@ obj-$(CONFIG_RTC_DRV_FTRTC010) += rtc-ftrtc010.o
obj-$(CONFIG_RTC_DRV_GENERIC) += rtc-generic.o
obj-$(CONFIG_RTC_DRV_GOLDFISH) += rtc-goldfish.o
obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o
-obj-$(CONFIG_RTC_DRV_HYM8563) += rtc-hym8563.o
obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o
obj-$(CONFIG_RTC_DRV_IMX_SC) += rtc-imx-sc.o
obj-$(CONFIG_RTC_DRV_IMX_BBM_SCMI) += rtc-imx-sm-bbm.o
deleted file mode 100644
@@ -1,587 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Haoyu HYM8563 RTC driver
- *
- * Copyright (C) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * based on rtc-HYM8563
- * Copyright (C) 2010 ROCKCHIP, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/clk-provider.h>
-#include <linux/i2c.h>
-#include <linux/bcd.h>
-#include <linux/rtc.h>
-
-#define HYM8563_CTL1 0x00
-#define HYM8563_CTL1_TEST BIT(7)
-#define HYM8563_CTL1_STOP BIT(5)
-#define HYM8563_CTL1_TESTC BIT(3)
-
-#define HYM8563_CTL2 0x01
-#define HYM8563_CTL2_TI_TP BIT(4)
-#define HYM8563_CTL2_AF BIT(3)
-#define HYM8563_CTL2_TF BIT(2)
-#define HYM8563_CTL2_AIE BIT(1)
-#define HYM8563_CTL2_TIE BIT(0)
-
-#define HYM8563_SEC 0x02
-#define HYM8563_SEC_VL BIT(7)
-#define HYM8563_SEC_MASK 0x7f
-
-#define HYM8563_MIN 0x03
-#define HYM8563_MIN_MASK 0x7f
-
-#define HYM8563_HOUR 0x04
-#define HYM8563_HOUR_MASK 0x3f
-
-#define HYM8563_DAY 0x05
-#define HYM8563_DAY_MASK 0x3f
-
-#define HYM8563_WEEKDAY 0x06
-#define HYM8563_WEEKDAY_MASK 0x07
-
-#define HYM8563_MONTH 0x07
-#define HYM8563_MONTH_CENTURY BIT(7)
-#define HYM8563_MONTH_MASK 0x1f
-
-#define HYM8563_YEAR 0x08
-
-#define HYM8563_ALM_MIN 0x09
-#define HYM8563_ALM_HOUR 0x0a
-#define HYM8563_ALM_DAY 0x0b
-#define HYM8563_ALM_WEEK 0x0c
-
-/* Each alarm check can be disabled by setting this bit in the register */
-#define HYM8563_ALM_BIT_DISABLE BIT(7)
-
-#define HYM8563_CLKOUT 0x0d
-#define HYM8563_CLKOUT_ENABLE BIT(7)
-#define HYM8563_CLKOUT_32768 0
-#define HYM8563_CLKOUT_1024 1
-#define HYM8563_CLKOUT_32 2
-#define HYM8563_CLKOUT_1 3
-#define HYM8563_CLKOUT_MASK 3
-
-#define HYM8563_TMR_CTL 0x0e
-#define HYM8563_TMR_CTL_ENABLE BIT(7)
-#define HYM8563_TMR_CTL_4096 0
-#define HYM8563_TMR_CTL_64 1
-#define HYM8563_TMR_CTL_1 2
-#define HYM8563_TMR_CTL_1_60 3
-#define HYM8563_TMR_CTL_MASK 3
-
-#define HYM8563_TMR_CNT 0x0f
-
-struct hym8563 {
- struct i2c_client *client;
- struct rtc_device *rtc;
-#ifdef CONFIG_COMMON_CLK
- struct clk_hw clkout_hw;
-#endif
-};
-
-/*
- * RTC handling
- */
-
-static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
- struct i2c_client *client = to_i2c_client(dev);
- u8 buf[7];
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
- if (ret < 0)
- return ret;
-
- if (buf[0] & HYM8563_SEC_VL) {
- dev_warn(&client->dev,
- "no valid clock/calendar values available\n");
- return -EINVAL;
- }
-
- tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
- tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
- tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
- tm->tm_mday = bcd2bin(buf[3] & HYM8563_DAY_MASK);
- tm->tm_wday = bcd2bin(buf[4] & HYM8563_WEEKDAY_MASK); /* 0 = Sun */
- tm->tm_mon = bcd2bin(buf[5] & HYM8563_MONTH_MASK) - 1; /* 0 = Jan */
- tm->tm_year = bcd2bin(buf[6]) + 100;
-
- return 0;
-}
-
-static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
- struct i2c_client *client = to_i2c_client(dev);
- u8 buf[7];
- int ret;
-
- /* Years >= 2100 are to far in the future, 19XX is to early */
- if (tm->tm_year < 100 || tm->tm_year >= 200)
- return -EINVAL;
-
- buf[0] = bin2bcd(tm->tm_sec);
- buf[1] = bin2bcd(tm->tm_min);
- buf[2] = bin2bcd(tm->tm_hour);
- buf[3] = bin2bcd(tm->tm_mday);
- buf[4] = bin2bcd(tm->tm_wday);
- buf[5] = bin2bcd(tm->tm_mon + 1);
-
- /*
- * While the HYM8563 has a century flag in the month register,
- * it does not seem to carry it over a subsequent write/read.
- * So we'll limit ourself to 100 years, starting at 2000 for now.
- */
- buf[6] = bin2bcd(tm->tm_year - 100);
-
- /*
- * CTL1 only contains TEST-mode bits apart from stop,
- * so no need to read the value first
- */
- ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1,
- HYM8563_CTL1_STOP);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_write_i2c_block_data(client, HYM8563_SEC, 7, buf);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int hym8563_rtc_alarm_irq_enable(struct device *dev,
- unsigned int enabled)
-{
- struct i2c_client *client = to_i2c_client(dev);
- int data;
-
- data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
- if (data < 0)
- return data;
-
- if (enabled)
- data |= HYM8563_CTL2_AIE;
- else
- data &= ~HYM8563_CTL2_AIE;
-
- return i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
-};
-
-static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct rtc_time *alm_tm = &alm->time;
- u8 buf[4];
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
- if (ret < 0)
- return ret;
-
- /* The alarm only has a minute accuracy */
- alm_tm->tm_sec = 0;
-
- alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
- -1 :
- bcd2bin(buf[0] & HYM8563_MIN_MASK);
- alm_tm->tm_hour = (buf[1] & HYM8563_ALM_BIT_DISABLE) ?
- -1 :
- bcd2bin(buf[1] & HYM8563_HOUR_MASK);
- alm_tm->tm_mday = (buf[2] & HYM8563_ALM_BIT_DISABLE) ?
- -1 :
- bcd2bin(buf[2] & HYM8563_DAY_MASK);
- alm_tm->tm_wday = (buf[3] & HYM8563_ALM_BIT_DISABLE) ?
- -1 :
- bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
-
- ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
- if (ret < 0)
- return ret;
-
- if (ret & HYM8563_CTL2_AIE)
- alm->enabled = 1;
-
- return 0;
-}
-
-static int hym8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct rtc_time *alm_tm = &alm->time;
- u8 buf[4];
- int ret;
-
- ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
- if (ret < 0)
- return ret;
-
- ret &= ~HYM8563_CTL2_AIE;
-
- ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
- if (ret < 0)
- return ret;
-
- buf[0] = (alm_tm->tm_min < 60 && alm_tm->tm_min >= 0) ?
- bin2bcd(alm_tm->tm_min) : HYM8563_ALM_BIT_DISABLE;
-
- buf[1] = (alm_tm->tm_hour < 24 && alm_tm->tm_hour >= 0) ?
- bin2bcd(alm_tm->tm_hour) : HYM8563_ALM_BIT_DISABLE;
-
- buf[2] = (alm_tm->tm_mday <= 31 && alm_tm->tm_mday >= 1) ?
- bin2bcd(alm_tm->tm_mday) : HYM8563_ALM_BIT_DISABLE;
-
- buf[3] = (alm_tm->tm_wday < 7 && alm_tm->tm_wday >= 0) ?
- bin2bcd(alm_tm->tm_wday) : HYM8563_ALM_BIT_DISABLE;
-
- ret = i2c_smbus_write_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
- if (ret < 0)
- return ret;
-
- return hym8563_rtc_alarm_irq_enable(dev, alm->enabled);
-}
-
-static const struct rtc_class_ops hym8563_rtc_ops = {
- .read_time = hym8563_rtc_read_time,
- .set_time = hym8563_rtc_set_time,
- .alarm_irq_enable = hym8563_rtc_alarm_irq_enable,
- .read_alarm = hym8563_rtc_read_alarm,
- .set_alarm = hym8563_rtc_set_alarm,
-};
-
-/*
- * Handling of the clkout
- */
-
-#ifdef CONFIG_COMMON_CLK
-#define clkout_hw_to_hym8563(_hw) container_of(_hw, struct hym8563, clkout_hw)
-
-static int clkout_rates[] = {
- 32768,
- 1024,
- 32,
- 1,
-};
-
-static unsigned long hym8563_clkout_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
- struct i2c_client *client = hym8563->client;
- int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
-
- if (ret < 0)
- return 0;
-
- ret &= HYM8563_CLKOUT_MASK;
- return clkout_rates[ret];
-}
-
-static long hym8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
- if (clkout_rates[i] <= rate)
- return clkout_rates[i];
-
- return 0;
-}
-
-static int hym8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
- struct i2c_client *client = hym8563->client;
- int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
- int i;
-
- if (ret < 0)
- return ret;
-
- for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
- if (clkout_rates[i] == rate) {
- ret &= ~HYM8563_CLKOUT_MASK;
- ret |= i;
- return i2c_smbus_write_byte_data(client,
- HYM8563_CLKOUT, ret);
- }
-
- return -EINVAL;
-}
-
-static int hym8563_clkout_control(struct clk_hw *hw, bool enable)
-{
- struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
- struct i2c_client *client = hym8563->client;
- int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
-
- if (ret < 0)
- return ret;
-
- if (enable)
- ret |= HYM8563_CLKOUT_ENABLE;
- else
- ret &= ~HYM8563_CLKOUT_ENABLE;
-
- return i2c_smbus_write_byte_data(client, HYM8563_CLKOUT, ret);
-}
-
-static int hym8563_clkout_prepare(struct clk_hw *hw)
-{
- return hym8563_clkout_control(hw, 1);
-}
-
-static void hym8563_clkout_unprepare(struct clk_hw *hw)
-{
- hym8563_clkout_control(hw, 0);
-}
-
-static int hym8563_clkout_is_prepared(struct clk_hw *hw)
-{
- struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
- struct i2c_client *client = hym8563->client;
- int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
-
- if (ret < 0)
- return ret;
-
- return !!(ret & HYM8563_CLKOUT_ENABLE);
-}
-
-static const struct clk_ops hym8563_clkout_ops = {
- .prepare = hym8563_clkout_prepare,
- .unprepare = hym8563_clkout_unprepare,
- .is_prepared = hym8563_clkout_is_prepared,
- .recalc_rate = hym8563_clkout_recalc_rate,
- .round_rate = hym8563_clkout_round_rate,
- .set_rate = hym8563_clkout_set_rate,
-};
-
-static struct clk *hym8563_clkout_register_clk(struct hym8563 *hym8563)
-{
- struct i2c_client *client = hym8563->client;
- struct device_node *node = client->dev.of_node;
- struct clk *clk;
- struct clk_init_data init;
- int ret;
-
- ret = i2c_smbus_write_byte_data(client, HYM8563_CLKOUT,
- 0);
- if (ret < 0)
- return ERR_PTR(ret);
-
- init.name = "hym8563-clkout";
- init.ops = &hym8563_clkout_ops;
- init.flags = 0;
- init.parent_names = NULL;
- init.num_parents = 0;
- hym8563->clkout_hw.init = &init;
-
- /* optional override of the clockname */
- of_property_read_string(node, "clock-output-names", &init.name);
-
- /* register the clock */
- clk = clk_register(&client->dev, &hym8563->clkout_hw);
-
- if (!IS_ERR(clk))
- of_clk_add_provider(node, of_clk_src_simple_get, clk);
-
- return clk;
-}
-#endif
-
-/*
- * The alarm interrupt is implemented as a level-low interrupt in the
- * hym8563, while the timer interrupt uses a falling edge.
- * We don't use the timer at all, so the interrupt is requested to
- * use the level-low trigger.
- */
-static irqreturn_t hym8563_irq(int irq, void *dev_id)
-{
- struct hym8563 *hym8563 = (struct hym8563 *)dev_id;
- struct i2c_client *client = hym8563->client;
- int data, ret;
-
- rtc_lock(hym8563->rtc);
-
- /* Clear the alarm flag */
-
- data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
- if (data < 0) {
- dev_err(&client->dev, "%s: error reading i2c data %d\n",
- __func__, data);
- goto out;
- }
-
- data &= ~HYM8563_CTL2_AF;
-
- ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
- if (ret < 0) {
- dev_err(&client->dev, "%s: error writing i2c data %d\n",
- __func__, ret);
- }
-
-out:
- rtc_unlock(hym8563->rtc);
- return IRQ_HANDLED;
-}
-
-static int hym8563_init_device(struct i2c_client *client)
-{
- int ret;
-
- /* Clear stop flag if present */
- ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
- if (ret < 0)
- return ret;
-
- /* Disable alarm and timer interrupts */
- ret &= ~HYM8563_CTL2_AIE;
- ret &= ~HYM8563_CTL2_TIE;
-
- /* Clear any pending alarm and timer flags */
- if (ret & HYM8563_CTL2_AF)
- ret &= ~HYM8563_CTL2_AF;
-
- if (ret & HYM8563_CTL2_TF)
- ret &= ~HYM8563_CTL2_TF;
-
- ret &= ~HYM8563_CTL2_TI_TP;
-
- return i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int hym8563_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- int ret;
-
- if (device_may_wakeup(dev)) {
- ret = enable_irq_wake(client->irq);
- if (ret) {
- dev_err(dev, "enable_irq_wake failed, %d\n", ret);
- return ret;
- }
- }
-
- return 0;
-}
-
-static int hym8563_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- if (device_may_wakeup(dev))
- disable_irq_wake(client->irq);
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume);
-
-static int hym8563_probe(struct i2c_client *client)
-{
- struct hym8563 *hym8563;
- int ret;
-
- hym8563 = devm_kzalloc(&client->dev, sizeof(*hym8563), GFP_KERNEL);
- if (!hym8563)
- return -ENOMEM;
-
- hym8563->rtc = devm_rtc_allocate_device(&client->dev);
- if (IS_ERR(hym8563->rtc))
- return PTR_ERR(hym8563->rtc);
-
- hym8563->client = client;
- i2c_set_clientdata(client, hym8563);
-
- ret = hym8563_init_device(client);
- if (ret) {
- dev_err(&client->dev, "could not init device, %d\n", ret);
- return ret;
- }
-
- if (client->irq > 0) {
- unsigned long irqflags = IRQF_TRIGGER_LOW;
-
- if (dev_fwnode(&client->dev))
- irqflags = 0;
-
- ret = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, hym8563_irq,
- irqflags | IRQF_ONESHOT,
- client->name, hym8563);
- if (ret < 0) {
- dev_err(&client->dev, "irq %d request failed, %d\n",
- client->irq, ret);
- return ret;
- }
- }
-
- if (client->irq > 0 ||
- device_property_read_bool(&client->dev, "wakeup-source")) {
- device_init_wakeup(&client->dev, true);
- }
-
- /* check state of calendar information */
- ret = i2c_smbus_read_byte_data(client, HYM8563_SEC);
- if (ret < 0)
- return ret;
-
- dev_dbg(&client->dev, "rtc information is %s\n",
- (ret & HYM8563_SEC_VL) ? "invalid" : "valid");
-
- hym8563->rtc->ops = &hym8563_rtc_ops;
- set_bit(RTC_FEATURE_ALARM_RES_MINUTE, hym8563->rtc->features);
- clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, hym8563->rtc->features);
-
-#ifdef CONFIG_COMMON_CLK
- hym8563_clkout_register_clk(hym8563);
-#endif
-
- return devm_rtc_register_device(hym8563->rtc);
-}
-
-static const struct i2c_device_id hym8563_id[] = {
- { "hym8563" },
- {}
-};
-MODULE_DEVICE_TABLE(i2c, hym8563_id);
-
-static const struct of_device_id hym8563_dt_idtable[] = {
- { .compatible = "haoyu,hym8563" },
- {},
-};
-MODULE_DEVICE_TABLE(of, hym8563_dt_idtable);
-
-static struct i2c_driver hym8563_driver = {
- .driver = {
- .name = "rtc-hym8563",
- .pm = &hym8563_pm_ops,
- .of_match_table = hym8563_dt_idtable,
- },
- .probe = hym8563_probe,
- .id_table = hym8563_id,
-};
-
-module_i2c_driver(hym8563_driver);
-
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_DESCRIPTION("HYM8563 RTC driver");
-MODULE_LICENSE("GPL");
The HYM8563 RTC device can work with pcf8563 driver. This removes and updates files related to RTC HYM8563. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- arch/arm/configs/multi_v7_defconfig | 1 - arch/arm64/configs/defconfig | 1 - drivers/rtc/Kconfig | 11 - drivers/rtc/Makefile | 1 - drivers/rtc/rtc-hym8563.c | 587 ---------------------------- 5 files changed, 601 deletions(-) delete mode 100644 drivers/rtc/rtc-hym8563.c