new file mode 100644
@@ -0,0 +1,50 @@
+====================================================
+Fujitsu Uncore PCI Performance Monitoring Unit (PMU)
+====================================================
+
+This driver supports the Uncore PCI PMUs found in Fujitsu chips.
+Each PCI PMU on these chips is exposed as a uncore perf PMU with device name
+pci_iod<iod>_pci<pci>.
+
+The driver provides a description of its available events and configuration
+options in sysfs, see /sys/bus/event_sources/devices/pci_iod<iod>_pci<pci>/.
+This driver exports:
+- formats, used by perf user space and other tools to configure events
+- events, used by perf user space and other tools to create events
+ symbolically, e.g.:
+ perf stat -a -e pci_iod0_pci0/event=0x24/ ls
+- cpumask, used by perf user space and other tools to know on which CPUs
+ to open the events
+
+This driver supports the following events:
+- pci-port0-cycles
+ This event counts PCI cycles at PCI frequency in port0.
+- pci-port0-read-count
+ This event counts read transactions for data transfer in port0.
+- pci-port0-read-count-bus
+ This event counts read transactions for bus usage in port0.
+- pci-port0-write-count
+ This event counts write transactions for data transfer in port0.
+- pci-port0-write-count-bus
+ This event counts write transactions for bus usage in port0.
+- pci-port1-cycles
+ This event counts PCI cycles at PCI frequency in port1.
+- pci-port1-read-count
+ This event counts read transactions for data transfer in port1.
+- pci-port1-read-count-bus
+ This event counts read transactions for bus usage in port1.
+- pci-port1-write-count
+ This event counts write transactions for data transfer in port1.
+- pci-port1-write-count-bus
+ This event counts write transactions for bus usage in port1.
+- ea-pci
+ This event counts energy consumption of the PCI.
+
+ 'ea' is the abbreviation for 'Energy Analyzer'.
+
+Examples for use with perf::
+
+ perf stat -e pci_iod0_pci0/ea-pci/ ls
+
+Given that these are uncore PMUs the driver does not support sampling, therefore
+"perf record" will not work. Per-task perf sessions are not supported.
@@ -28,3 +28,4 @@ Performance monitor support
ampere_cspmu
mrvl-pem-pmu
fujitsu_mac_pmu
+ fujitsu_pci_pmu
@@ -187,6 +187,15 @@ config FUJITSU_MAC_PMU
Adds the Uncore MAC PMU into the perf events subsystem for
monitoring Uncore MAC events.
+config FUJITSU_PCI_PMU
+ bool "Fujitsu Uncore PCI PMU"
+ depends on (ARM64 && ACPI) || (COMPILE_TEST && 64BIT)
+ help
+ Provides support for the Uncore PCI performance monitor unit (PMU)
+ in Fujitsu processors.
+ Adds the Uncore PCI PMU into the perf events subsystem for
+ monitoring Uncore PCI events.
+
config QCOM_L2_PMU
bool "Qualcomm Technologies L2-cache PMU"
depends on ARCH_QCOM && ARM64 && ACPI
@@ -15,6 +15,7 @@ obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
obj-$(CONFIG_FSL_IMX9_DDR_PMU) += fsl_imx9_ddr_perf.o
obj-$(CONFIG_HISI_PMU) += hisilicon/
obj-$(CONFIG_FUJITSU_MAC_PMU) += fujitsu_mac_pmu.o
+obj-$(CONFIG_FUJITSU_PCI_PMU) += fujitsu_pci_pmu.o
obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
new file mode 100644
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the Uncore PCI PMUs in Fujitsu chips.
+ *
+ * See Documentation/admin-guide/perf/fujitsu_pci_pmu.rst for more details.
+ *
+ * This driver is based on drivers/perf/qcom_l3_pmu.c
+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024 Fujitsu. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+
+/* Number of counters on each PMU */
+#define PCI_NUM_COUNTERS 8
+/* Mask for the event type field within perf_event_attr.config and EVTYPE reg */
+#define PCI_EVTYPE_MASK 0xFF
+
+/* Perfmon registers */
+#define PCI_PM_EVCNTR(__cntr) (0x000 + ((__cntr) & 0x7) * 8)
+#define PCI_PM_CNTCTL(__cntr) (0x100 + ((__cntr) & 0x7) * 8)
+#define PCI_PM_EVTYPE(__cntr) (0x200 + ((__cntr) & 0x7) * 8)
+#define PCI_PM_CR 0x400
+#define PCI_PM_CNTENSET 0x410
+#define PCI_PM_CNTENCLR 0x418
+#define PCI_PM_INTENSET 0x420
+#define PCI_PM_INTENCLR 0x428
+#define PCI_PM_OVSR 0x440
+
+/* PCI_PM_CNTCTLx */
+#define PMCNT_RESET 0
+
+/* PCI_PM_EVTYPEx */
+#define EVSEL(__val) ((__val) & PCI_EVTYPE_MASK)
+
+/* PCI_PM_CR */
+#define PM_RESET (1UL << 1)
+#define PM_ENABLE (1UL << 0)
+
+/* PCI_PM_CNTENSET */
+#define PMCNTENSET(__cntr) (1UL << ((__cntr) & 0x7))
+
+/* PCI_PM_CNTENCLR */
+#define PMCNTENCLR(__cntr) (1UL << ((__cntr) & 0x7))
+#define PM_CNTENCLR_RESET 0xFF
+
+/* PCI_PM_INTENSET */
+#define PMINTENSET(__cntr) (1UL << ((__cntr) & 0x7))
+
+/* PCI_PM_INTENCLR */
+#define PMINTENCLR(__cntr) (1UL << ((__cntr) & 0x7))
+#define PM_INTENCLR_RESET 0xFF
+
+/* PCI_PM_OVSR */
+#define PMOVSRCLR(__cntr) (1UL << ((__cntr) & 0x7))
+#define PMOVSRCLR_RESET 0xFF
+
+#define PCI_EVENT_PORT0_CYCLES 0x000
+#define PCI_EVENT_PORT0_READ_COUNT 0x010
+#define PCI_EVENT_PORT0_READ_COUNT_BUS 0x014
+#define PCI_EVENT_PORT0_WRITE_COUNT 0x020
+#define PCI_EVENT_PORT0_WRITE_COUNT_BUS 0x024
+#define PCI_EVENT_PORT1_CYCLES 0x040
+#define PCI_EVENT_PORT1_READ_COUNT 0x050
+#define PCI_EVENT_PORT1_READ_COUNT_BUS 0x054
+#define PCI_EVENT_PORT1_WRITE_COUNT 0x060
+#define PCI_EVENT_PORT1_WRITE_COUNT_BUS 0x064
+#define PCI_EVENT_EA_PCI 0x080
+
+struct pci_pmu {
+ struct pmu pmu;
+ struct hlist_node node;
+ void __iomem *regs;
+ struct perf_event *events[PCI_NUM_COUNTERS];
+ unsigned long used_mask[BITS_TO_LONGS(PCI_NUM_COUNTERS)];
+ cpumask_t cpumask;
+};
+
+#define to_pci_pmu(p) (container_of(p, struct pci_pmu, pmu))
+
+static void fujitsu_pci_counter_start(struct perf_event *event)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ int idx = event->hw.idx;
+
+ /* Initialize the hardware counter and reset prev_count*/
+ local64_set(&event->hw.prev_count, 0);
+ writeq_relaxed(0, pcipmu->regs + PCI_PM_EVCNTR(idx));
+
+ /* Set the event type */
+ writeq_relaxed(EVSEL(event->attr.config), pcipmu->regs + PCI_PM_EVTYPE(idx));
+
+ /* Enable interrupt generation by this counter */
+ writeq_relaxed(PMINTENSET(idx), pcipmu->regs + PCI_PM_INTENSET);
+
+ /* Finally, enable the counter */
+ writeq_relaxed(PMCNT_RESET, pcipmu->regs + PCI_PM_CNTCTL(idx));
+ writeq_relaxed(PMCNTENSET(idx), pcipmu->regs + PCI_PM_CNTENSET);
+}
+
+static void fujitsu_pci_counter_stop(struct perf_event *event,
+ int flags)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ int idx = event->hw.idx;
+
+ /* Disable the counter */
+ writeq_relaxed(PMCNTENCLR(idx), pcipmu->regs + PCI_PM_CNTENCLR);
+
+ /* Disable interrupt generation by this counter */
+ writeq_relaxed(PMINTENCLR(idx), pcipmu->regs + PCI_PM_INTENCLR);
+}
+
+static void fujitsu_pci_counter_update(struct perf_event *event)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ int idx = event->hw.idx;
+ u64 prev, new;
+
+ do {
+ prev = local64_read(&event->hw.prev_count);
+ new = readq_relaxed(pcipmu->regs + PCI_PM_EVCNTR(idx));
+ } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
+
+ local64_add(new - prev, &event->count);
+}
+
+static inline void fujitsu_pci__init(struct pci_pmu *pcipmu)
+{
+ int i;
+
+ writeq_relaxed(PM_RESET, pcipmu->regs + PCI_PM_CR);
+
+ writeq_relaxed(PM_CNTENCLR_RESET, pcipmu->regs + PCI_PM_CNTENCLR);
+ writeq_relaxed(PM_INTENCLR_RESET, pcipmu->regs + PCI_PM_INTENCLR);
+ writeq_relaxed(PMOVSRCLR_RESET, pcipmu->regs + PCI_PM_OVSR);
+
+ for (i = 0; i < PCI_NUM_COUNTERS; ++i) {
+ writeq_relaxed(PMCNT_RESET, pcipmu->regs + PCI_PM_CNTCTL(i));
+ writeq_relaxed(EVSEL(0), pcipmu->regs + PCI_PM_EVTYPE(i));
+ }
+
+ /*
+ * Use writeq here to ensure all programming commands are done
+ * before proceeding
+ */
+ writeq(PM_ENABLE, pcipmu->regs + PCI_PM_CR);
+}
+
+static irqreturn_t fujitsu_pci__handle_irq(int irq_num, void *data)
+{
+ struct pci_pmu *pcipmu = data;
+ /* Read the overflow status register */
+ long status = readq_relaxed(pcipmu->regs + PCI_PM_OVSR);
+ int idx;
+
+ if (status == 0)
+ return IRQ_NONE;
+
+ /* Clear the bits we read on the overflow status register */
+ writeq_relaxed(status, pcipmu->regs + PCI_PM_OVSR);
+
+ for_each_set_bit(idx, &status, PCI_NUM_COUNTERS) {
+ struct perf_event *event;
+
+ event = pcipmu->events[idx];
+ if (!event)
+ continue;
+
+ fujitsu_pci_counter_update(event);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fujitsu_pci__pmu_enable(struct pmu *pmu)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(pmu);
+
+ /* Ensure the other programming commands are observed before enabling */
+ wmb();
+
+ writeq_relaxed(PM_ENABLE, pcipmu->regs + PCI_PM_CR);
+}
+
+static void fujitsu_pci__pmu_disable(struct pmu *pmu)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(pmu);
+
+ writeq_relaxed(0, pcipmu->regs + PCI_PM_CR);
+
+ /* Ensure the basic counter unit is stopped before proceeding */
+ wmb();
+}
+
+/*
+ * We must NOT create groups containing events from multiple hardware PMUs,
+ * although mixing different software and hardware PMUs is allowed.
+ */
+static bool fujitsu_pci__validate_event_group(struct perf_event *event)
+{
+ struct perf_event *leader = event->group_leader;
+ struct perf_event *sibling;
+ int counters = 0;
+
+ if (leader->pmu != event->pmu && !is_software_event(leader))
+ return false;
+
+ /* The sum of the counters used by the event and its leader event */
+ counters = 2;
+
+ for_each_sibling_event(sibling, leader) {
+ if (is_software_event(sibling))
+ continue;
+ if (sibling->pmu != event->pmu)
+ return false;
+ counters += 1;
+ }
+
+ /*
+ * If the group requires more counters than the HW has, it
+ * cannot ever be scheduled.
+ */
+ return counters <= PCI_NUM_COUNTERS;
+}
+
+static int fujitsu_pci__event_init(struct perf_event *event)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Is the event for this PMU? */
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ /*
+ * Sampling not supported
+ * since these events are not core-attributable.
+ */
+ if (hwc->sample_period)
+ return -EINVAL;
+
+ /*
+ * Task mode not available, we run the counters as socket counters,
+ * not attributable to any CPU and therefore cannot attribute per-task.
+ */
+ if (event->cpu < 0)
+ return -EINVAL;
+
+ /* Validate the group */
+ if (!fujitsu_pci__validate_event_group(event))
+ return -EINVAL;
+
+ hwc->idx = -1;
+
+ /*
+ * Many perf core operations (eg. events rotation) operate on a
+ * single CPU context. This is obvious for CPU PMUs, where one
+ * expects the same sets of events being observed on all CPUs,
+ * but can lead to issues for off-core PMUs, like this one, where
+ * each event could be theoretically assigned to a different CPU.
+ * To mitigate this, we enforce CPU assignment to one designated
+ * processor (the one described in the "cpumask" attribute exported
+ * by the PMU device). perf user space tools honor this and avoid
+ * opening more than one copy of the events.
+ */
+ event->cpu = cpumask_first(&pcipmu->cpumask);
+
+ return 0;
+}
+
+static void fujitsu_pci__event_start(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ hwc->state = 0;
+ fujitsu_pci_counter_start(event);
+}
+
+static void fujitsu_pci__event_stop(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ fujitsu_pci_counter_stop(event, flags);
+ if (flags & PERF_EF_UPDATE)
+ fujitsu_pci_counter_update(event);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static int fujitsu_pci__event_add(struct perf_event *event, int flags)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+
+ /* Try to allocate a counter. */
+ idx = bitmap_find_free_region(pcipmu->used_mask, PCI_NUM_COUNTERS, 0);
+ if (idx < 0)
+ /* The counters are all in use. */
+ return -EAGAIN;
+
+ hwc->idx = idx;
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ pcipmu->events[idx] = event;
+
+ if (flags & PERF_EF_START)
+ fujitsu_pci__event_start(event, 0);
+
+ /* Propagate changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
+static void fujitsu_pci__event_del(struct perf_event *event, int flags)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Stop and clean up */
+ fujitsu_pci__event_stop(event, flags | PERF_EF_UPDATE);
+ pcipmu->events[hwc->idx] = NULL;
+ bitmap_release_region(pcipmu->used_mask, hwc->idx, 0);
+
+ /* Propagate changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+}
+
+static void fujitsu_pci__event_read(struct perf_event *event)
+{
+ fujitsu_pci_counter_update(event);
+}
+
+#define PCI_PMU_FORMAT_ATTR(_name, _config) \
+ (&((struct dev_ext_attribute[]) { \
+ { .attr = __ATTR(_name, 0444, device_show_string, NULL), \
+ .var = (void *) _config, } \
+ })[0].attr.attr)
+
+static struct attribute *fujitsu_pci_pmu_formats[] = {
+ PCI_PMU_FORMAT_ATTR(event, "config:0-7"),
+ NULL
+};
+
+static const struct attribute_group fujitsu_pci_pmu_format_group = {
+ .name = "format",
+ .attrs = fujitsu_pci_pmu_formats
+};
+
+static ssize_t pci_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+ return sysfs_emit(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+#define PCI_EVENT_ATTR(_name, _id) \
+ PMU_EVENT_ATTR_ID(_name, pci_pmu_event_show, _id)
+
+static struct attribute *fujitsu_pci_pmu_events[] = {
+ PCI_EVENT_ATTR(pci-port0-cycles, PCI_EVENT_PORT0_CYCLES),
+ PCI_EVENT_ATTR(pci-port0-read-count, PCI_EVENT_PORT0_READ_COUNT),
+ PCI_EVENT_ATTR(pci-port0-read-count-bus, PCI_EVENT_PORT0_READ_COUNT_BUS),
+ PCI_EVENT_ATTR(pci-port0-write-count, PCI_EVENT_PORT0_WRITE_COUNT),
+ PCI_EVENT_ATTR(pci-port0-write-count-bus, PCI_EVENT_PORT0_WRITE_COUNT_BUS),
+ PCI_EVENT_ATTR(pci-port1-cycles, PCI_EVENT_PORT1_CYCLES),
+ PCI_EVENT_ATTR(pci-port1-read-count, PCI_EVENT_PORT1_READ_COUNT),
+ PCI_EVENT_ATTR(pci-port1-read-count-bus, PCI_EVENT_PORT1_READ_COUNT_BUS),
+ PCI_EVENT_ATTR(pci-port1-write-count, PCI_EVENT_PORT1_WRITE_COUNT),
+ PCI_EVENT_ATTR(pci-port1-write-count-bus, PCI_EVENT_PORT1_WRITE_COUNT_BUS),
+ PCI_EVENT_ATTR(ea-pci, PCI_EVENT_EA_PCI),
+ NULL
+};
+
+static const struct attribute_group fujitsu_pci_pmu_events_group = {
+ .name = "events",
+ .attrs = fujitsu_pci_pmu_events
+};
+
+static ssize_t cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pci_pmu *pcipmu = to_pci_pmu(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, &pcipmu->cpumask);
+}
+
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *fujitsu_pci_pmu_cpumask_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL
+};
+
+static const struct attribute_group fujitsu_pci_pmu_cpumask_attr_group = {
+ .attrs = fujitsu_pci_pmu_cpumask_attrs
+};
+
+static const struct attribute_group *fujitsu_pci_pmu_attr_grps[] = {
+ &fujitsu_pci_pmu_format_group,
+ &fujitsu_pci_pmu_events_group,
+ &fujitsu_pci_pmu_cpumask_attr_group,
+ NULL
+};
+
+static int fujitsu_pci_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct pci_pmu *pcipmu = hlist_entry_safe(node, struct pci_pmu, node);
+
+ /* If there is not a CPU/PMU association pick this CPU */
+ if (cpumask_empty(&pcipmu->cpumask))
+ cpumask_set_cpu(cpu, &pcipmu->cpumask);
+
+ return 0;
+}
+
+static int fujitsu_pci_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct pci_pmu *pcipmu = hlist_entry_safe(node, struct pci_pmu, node);
+ unsigned int target;
+
+ if (!cpumask_test_and_clear_cpu(cpu, &pcipmu->cpumask))
+ return 0;
+
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target >= nr_cpu_ids)
+ return 0;
+
+ perf_pmu_migrate_context(&pcipmu->pmu, cpu, target);
+ cpumask_set_cpu(target, &pcipmu->cpumask);
+
+ return 0;
+}
+
+static int fujitsu_pci_pmu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct acpi_device *acpi_dev;
+ struct pci_pmu *pcipmu;
+ struct resource *memrc;
+ char *name;
+ int ret;
+ u64 uid;
+
+ acpi_dev = ACPI_COMPANION(dev);
+ if (!acpi_dev)
+ return -ENODEV;
+
+ ret = acpi_dev_uid_to_integer(acpi_dev, &uid);
+ if (ret)
+ return dev_err_probe(dev, ret, "unable to read ACPI uid\n");
+
+ pcipmu = devm_kzalloc(dev, sizeof(*pcipmu), GFP_KERNEL);
+ name = devm_kasprintf(dev, GFP_KERNEL, "pci_iod%llu_pci%llu",
+ (uid >> 4) & 0xF, uid & 0xF);
+ if (!pcipmu)
+ return -ENOMEM;
+
+ if (!name)
+ return -ENOMEM;
+
+ pcipmu->pmu = (struct pmu) {
+ .parent = dev,
+ .task_ctx_nr = perf_invalid_context,
+
+ .pmu_enable = fujitsu_pci__pmu_enable,
+ .pmu_disable = fujitsu_pci__pmu_disable,
+ .event_init = fujitsu_pci__event_init,
+ .add = fujitsu_pci__event_add,
+ .del = fujitsu_pci__event_del,
+ .start = fujitsu_pci__event_start,
+ .stop = fujitsu_pci__event_stop,
+ .read = fujitsu_pci__event_read,
+
+ .attr_groups = fujitsu_pci_pmu_attr_grps,
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE
+ };
+
+ pcipmu->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &memrc);
+ if (IS_ERR(pcipmu->regs))
+ return PTR_ERR(pcipmu->regs);
+
+ fujitsu_pci__init(pcipmu);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0)
+ return ret;
+
+ ret = devm_request_irq(dev, ret, fujitsu_pci__handle_irq, 0,
+ name, pcipmu);
+ if (ret)
+ return dev_err_probe(dev, ret, "Request for IRQ failed for slice @%pa\n",
+ &memrc->start);
+
+ /* Add this instance to the list used by the offline callback */
+ ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_FUJITSU_PCI_ONLINE, &pcipmu->node);
+ if (ret)
+ return dev_err_probe(dev, ret, "Error %d registering hotplug", ret);
+
+ ret = perf_pmu_register(&pcipmu->pmu, name, -1);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to register PCI PMU (%d)\n", ret);
+
+ dev_dbg(dev, "Registered %s, type: %d\n", name, pcipmu->pmu.type);
+
+ return 0;
+}
+
+static const struct acpi_device_id fujitsu_pci_pmu_acpi_match[] = {
+ { "FUJI200D", },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, fujitsu_pci_pmu_acpi_match);
+
+static struct platform_driver fujitsu_pci_pmu_driver = {
+ .driver = {
+ .name = "fujitsu-pci-pmu",
+ .acpi_match_table = fujitsu_pci_pmu_acpi_match,
+ .suppress_bind_attrs = true
+ },
+ .probe = fujitsu_pci_pmu_probe
+};
+
+static int __init register_fujitsu_pci_pmu_driver(void)
+{
+ int ret;
+
+ /* Install a hook to update the reader CPU in case it goes offline */
+ ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_FUJITSU_PCI_ONLINE,
+ "perf/fujitsu/pci:online",
+ fujitsu_pci_pmu_online_cpu,
+ fujitsu_pci_pmu_offline_cpu);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&fujitsu_pci_pmu_driver);
+}
+device_initcall(register_fujitsu_pci_pmu_driver);
@@ -229,6 +229,7 @@ enum cpuhp_state {
CPUHP_AP_PERF_ARM_MARVELL_CN10K_DDR_ONLINE,
CPUHP_AP_PERF_ARM_MRVL_PEM_ONLINE,
CPUHP_AP_PERF_ARM_FUJITSU_MAC_ONLINE,
+ CPUHP_AP_PERF_ARM_FUJITSU_PCI_ONLINE,
CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE,
CPUHP_AP_PERF_POWERPC_CORE_IMC_ONLINE,
CPUHP_AP_PERF_POWERPC_THREAD_IMC_ONLINE,
This adds a new dynamic PMU to the Perf Events framework to program and control the Uncore PCI PMUs in Fujitsu chips. This driver was created with reference to drivers/perf/qcom_l3_pmu.c. This driver exports formatting and event information to sysfs so it can be used by the perf user space tools with the syntaxes: perf stat -e pci_iod0_pci0/ea-pci/ ls perf stat -e pci_iod0_pci0/event=0x80/ ls FUJITSU-MONAKA Specification URL: https://github.com/fujitsu/FUJITSU-MONAKA Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com> --- .../admin-guide/perf/fujitsu_pci_pmu.rst | 50 ++ Documentation/admin-guide/perf/index.rst | 1 + drivers/perf/Kconfig | 9 + drivers/perf/Makefile | 1 + drivers/perf/fujitsu_pci_pmu.c | 550 ++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 6 files changed, 612 insertions(+) create mode 100644 Documentation/admin-guide/perf/fujitsu_pci_pmu.rst create mode 100644 drivers/perf/fujitsu_pci_pmu.c