diff mbox series

[v2,2/6] arm64: dts: imx8mp: Configure dsp node for rproc usage

Message ID 20241125152427.136883-3-daniel.baluta@nxp.com (mailing list archive)
State New
Headers show
Series Configure imx8mp dsp node for rproc usage | expand

Commit Message

Daniel Baluta Nov. 25, 2024, 3:24 p.m. UTC 
DSP can be used with various frameworks (e.g audio firmware, rproc).
Currently 'dsp' configuration is intended for audio firmware but it
doesn't work well with board level DTs (e.g imx8mp-evk) because
board level DT enables audio related IPs (e.g SAI) while audio firmware
needs this IPs disabled (because firmware will configure them).

So, configure 'dsp' node to be used with rproc. This way users will be
able to use board DT to use the DSP as long as they don't clash with
Audio IP configurations.

More comples usage of 'dsp' node (e.g by audio firmware) will need to
create a separate dts file (or an overlay).

This change follows the approach taken for other i.MX8 boards
in commit 391a319c81f6d7 ("arm64: dts: imx8-ss-audio: configure dsp node
for rproc usage")

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 00924e0836db..2f94c55e4999 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -280,7 +280,7 @@  reserved-memory {
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
 			status = "disabled";
 		};
@@ -2414,12 +2414,12 @@  usb_dwc3_1: usb@38200000 {
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
 			memory-region = <&dsp_reserved>;
 			status = "disabled";
 		};