diff mbox series

[net,v4,1/2] net: ti: icssg-prueth: Fix firmware load sequence.

Message ID 20241211135941.1800240-2-m-malladi@ti.com (mailing list archive)
State New
Headers show
Series IEP clock module bug fixes | expand

Commit Message

Meghana Malladi Dec. 11, 2024, 1:59 p.m. UTC
From: MD Danish Anwar <danishanwar@ti.com>

Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.

As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).

Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.

Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.

Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
---

Hi all,

This patch is based on net-next tagged next-20241205
v3:https://lore.kernel.org/all/20241205082831.777868-2-m-malladi@ti.com/

* Changes since v3 (v4-v3):
- Add error handling for prueth_emac_restart() suggested by Roger Quadros <rogerq@kernel.org>
- Remove fw_running flag as suggested by Roger Quadros <rogerq@kernel.org> and Diogo Ivo <diogo.ivo@siemens.com>
- Few cosmetic changes suggested by Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>

 drivers/net/ethernet/ti/icssg/icssg_common.c  |   1 -
 drivers/net/ethernet/ti/icssg/icssg_config.c  |  41 ++--
 drivers/net/ethernet/ti/icssg/icssg_config.h  |   1 +
 drivers/net/ethernet/ti/icssg/icssg_prueth.c  | 200 ++++++++++++------
 drivers/net/ethernet/ti/icssg/icssg_prueth.h  |   6 +-
 .../net/ethernet/ti/icssg/icssg_prueth_sr1.c  |   1 -
 6 files changed, 170 insertions(+), 80 deletions(-)

Comments

Dan Carpenter Dec. 11, 2024, 3:46 p.m. UTC | #1
On Wed, Dec 11, 2024 at 07:29:40PM +0530, Meghana Malladi wrote:
> -static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
> +static int prueth_emac_start(struct prueth *prueth, int slice)
>  {
>  	struct icssg_firmwares *firmwares;
>  	struct device *dev = prueth->dev;
> -	int slice, ret;
> +	int ret;
>  
>  	if (prueth->is_switch_mode)
>  		firmwares = icssg_switch_firmwares;
> @@ -177,16 +177,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>  	else
>  		firmwares = icssg_emac_firmwares;
>  
> -	slice = prueth_emac_slice(emac);
> -	if (slice < 0) {
> -		netdev_err(emac->ndev, "invalid port\n");
> -		return -EINVAL;
> -	}
> -
> -	ret = icssg_config(prueth, emac, slice);
> -	if (ret)
> -		return ret;
> -
>  	ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
>  	ret = rproc_boot(prueth->pru[slice]);

This isn't introduced by this patch but eventually Colin King is going to
get annoyed with you for setting ret twice in a row.

>  	if (ret) {
> @@ -208,7 +198,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>  		goto halt_rtu;
>  	}
>  
> -	emac->fw_running = 1;
>  	return 0;
>  
>  halt_rtu:
> @@ -220,6 +209,78 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>  	return ret;
>  }
>  
> +static int prueth_emac_common_start(struct prueth *prueth)
> +{
> +	struct prueth_emac *emac;
> +	int ret = 0;
> +	int slice;
> +
> +	if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
> +		return -EINVAL;
> +
> +	/* clear SMEM and MSMC settings for all slices */
> +	memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
> +	memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
> +
> +	icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
> +	icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
> +
> +	if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
> +		icssg_init_fw_offload_mode(prueth);
> +	else
> +		icssg_init_emac_mode(prueth);
> +
> +	for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
> +		emac = prueth->emac[slice];
> +		if (emac) {
> +			ret |= icssg_config(prueth, emac, slice);
> +			if (ret)
> +				return ret;

Here we return directly.

> +		}
> +		ret |= prueth_emac_start(prueth, slice);

Here we continue.  Generally, I would expect there to be some clean up
on this error path like this:

		ret = prueth_emac_start(prueth, slice);
		if (ret)
			goto unwind_slices;

	...

	return 0;

unwind_slices:
	while (--slice >= 0)
		prueth_emac_stop(prueth, slice);

	return ret;

I dread to see how the cleanup is handled on this path...

Ok.  I've looked at it and, nope, it doesn't work.  This is freed in
prueth_emac_common_stop() but partial allocations are not freed.
Also the prueth_emac_stop() is open coded as three calls to
rproc_shutdown() which is ugly.

I've written a blog which describes a system for writing error
handling code.  If each function cleans up after itself by freeing
its own partial allocations then you don't need to have a variable
like "prueth->prus_running = 1;" to track how far the allocation
process went before failing.
https://staticthinking.wordpress.com/2022/04/28/free-the-last-thing-style/

regards,
dan carpenter
Meghana Malladi Dec. 13, 2024, 12:26 p.m. UTC | #2
On 11/12/24 21:16, Dan Carpenter wrote:
> On Wed, Dec 11, 2024 at 07: 29: 40PM +0530, Meghana Malladi wrote: > 
> -static int prueth_emac_start(struct prueth *prueth, struct prueth_emac 
> *emac) > +static int prueth_emac_start(struct prueth *prueth, int slice) 
>  > { > struct icssg_firmwares
> ZjQcmQRYFpfptBannerStart
> This message was sent from outside of Texas Instruments.
> Do not click links or open attachments unless you recognize the source 
> of this email and know the content is safe.
> Report Suspicious
> <https://us-phishalarm-ewt.proofpoint.com/EWT/v1/G3vK!uldqfRcOdo0RqyXEHNnjPxku43QuA2sRmrlczDVj-denyMX3qWPEeHokm6IS-fNmWZGSvK3Wn7nSFeNotanVMDOTlZZjZ8Ausf9AkMk$>
> ZjQcmQRYFpfptBannerEnd
> 
> On Wed, Dec 11, 2024 at 07:29:40PM +0530, Meghana Malladi wrote:
>> -static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>> +static int prueth_emac_start(struct prueth *prueth, int slice)
>>  {
>>  	struct icssg_firmwares *firmwares;
>>  	struct device *dev = prueth->dev;
>> -	int slice, ret;
>> +	int ret;
>>  
>>  	if (prueth->is_switch_mode)
>>  		firmwares = icssg_switch_firmwares;
>> @@ -177,16 +177,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>>  	else
>>  		firmwares = icssg_emac_firmwares;
>>  
>> -	slice = prueth_emac_slice(emac);
>> -	if (slice < 0) {
>> -		netdev_err(emac->ndev, "invalid port\n");
>> -		return -EINVAL;
>> -	}
>> -
>> -	ret = icssg_config(prueth, emac, slice);
>> -	if (ret)
>> -		return ret;
>> -
>>  	ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
>>  	ret = rproc_boot(prueth->pru[slice]);
> 
> This isn't introduced by this patch but eventually Colin King is going to
> get annoyed with you for setting ret twice in a row.
> 

Yeah ok, I will fix this as part of this patch.

>>  	if (ret) {
>> @@ -208,7 +198,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>>  		goto halt_rtu;
>>  	}
>>  
>> -	emac->fw_running = 1;
>>  	return 0;
>>  
>>  halt_rtu:
>> @@ -220,6 +209,78 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
>>  	return ret;
>>  }
>>  
>> +static int prueth_emac_common_start(struct prueth *prueth)
>> +{
>> +	struct prueth_emac *emac;
>> +	int ret = 0;
>> +	int slice;
>> +
>> +	if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
>> +		return -EINVAL;
>> +
>> +	/* clear SMEM and MSMC settings for all slices */
>> +	memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
>> +	memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
>> +
>> +	icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
>> +	icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
>> +
>> +	if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
>> +		icssg_init_fw_offload_mode(prueth);
>> +	else
>> +		icssg_init_emac_mode(prueth);
>> +
>> +	for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
>> +		emac = prueth->emac[slice];
>> +		if (emac) {
>> +			ret |= icssg_config(prueth, emac, slice);
>> +			if (ret)
>> +				return ret;
> 
> Here we return directly.
> 
>> +		}
>> +		ret |= prueth_emac_start(prueth, slice);
> 
> Here we continue.  Generally, I would expect there to be some clean up
> on this error path like this:
> 
> 		ret = prueth_emac_start(prueth, slice);
> 		if (ret)
> 			goto unwind_slices;
> 
> 	...
> 
> 	return 0;
> 
> unwind_slices:
> 	while (--slice >= 0)
> 		prueth_emac_stop(prueth, slice);
> 
> 	return ret;
> 
> I dread to see how the cleanup is handled on this path...
> 
> Ok.  I've looked at it and, nope, it doesn't work.  This is freed in
> prueth_emac_common_stop() but partial allocations are not freed.
> Also the prueth_emac_stop() is open coded as three calls to
> rproc_shutdown() which is ugly.
> 
> I've written a blog which describes a system for writing error
> handling code.  If each function cleans up after itself by freeing
> its own partial allocations then you don't need to have a variable
> like "prueth->prus_running = 1;" to track how far the allocation
> process went before failing.
> https://urldefense.com/v3/__https://staticthinking.wordpress.com/2022/04/28/free-the-last-thing-style/__;!!G3vK!T5VCna8tMLVZNSL49zSwJOQBnoAQEa2xqXUUsIYY78CYm5mEH2wAdMX9CDEfMHXWsjTn0sG4mwKevVIOrgfAuQ$  <https://urldefense.com/v3/__https://staticthinking.wordpress.com/2022/04/28/free-the-last-thing-style/__;!!G3vK!T5VCna8tMLVZNSL49zSwJOQBnoAQEa2xqXUUsIYY78CYm5mEH2wAdMX9CDEfMHXWsjTn0sG4mwKevVIOrgfAuQ$>
> 

I agree that current error handling is all over the place. But I wasn't 
sure what would be the cleanest approach here. Thanks for sharing the 
blog, I have looked into it and looks very promising. I will try this 
approach and get back to you.

thanks & regards,
Meghana Malladi.

> regards,
> dan carpenter
>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
index fdebeb2f84e0..179b5de58281 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_common.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -872,7 +872,6 @@  void prueth_emac_stop(struct prueth_emac *emac)
 		return;
 	}
 
-	emac->fw_running = 0;
 	if (!emac->is_sr1)
 		rproc_shutdown(prueth->txpru[slice]);
 	rproc_shutdown(prueth->rtu[slice]);
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
index 5d2491c2943a..ddfd1c02a885 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
@@ -397,7 +397,7 @@  static int prueth_emac_buffer_setup(struct prueth_emac *emac)
 	return 0;
 }
 
-static void icssg_init_emac_mode(struct prueth *prueth)
+void icssg_init_emac_mode(struct prueth *prueth)
 {
 	/* When the device is configured as a bridge and it is being brought
 	 * back to the emac mode, the host mac address has to be set as 0.
@@ -406,9 +406,6 @@  static void icssg_init_emac_mode(struct prueth *prueth)
 	int i;
 	u8 mac[ETH_ALEN] = { 0 };
 
-	if (prueth->emacs_initialized)
-		return;
-
 	/* Set VLAN TABLE address base */
 	regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
 			   addr <<  SMEM_VLAN_OFFSET);
@@ -423,15 +420,13 @@  static void icssg_init_emac_mode(struct prueth *prueth)
 	/* Clear host MAC address */
 	icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
 }
+EXPORT_SYMBOL_GPL(icssg_init_emac_mode);
 
-static void icssg_init_fw_offload_mode(struct prueth *prueth)
+void icssg_init_fw_offload_mode(struct prueth *prueth)
 {
 	u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET;
 	int i;
 
-	if (prueth->emacs_initialized)
-		return;
-
 	/* Set VLAN TABLE address base */
 	regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
 			   addr <<  SMEM_VLAN_OFFSET);
@@ -448,6 +443,7 @@  static void icssg_init_fw_offload_mode(struct prueth *prueth)
 		icssg_class_set_host_mac_addr(prueth->miig_rt, prueth->hw_bridge_dev->dev_addr);
 	icssg_set_pvid(prueth, prueth->default_vlan, PRUETH_PORT_HOST);
 }
+EXPORT_SYMBOL_GPL(icssg_init_fw_offload_mode);
 
 int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
 {
@@ -455,11 +451,6 @@  int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
 	struct icssg_flow_cfg __iomem *flow_cfg;
 	int ret;
 
-	if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
-		icssg_init_fw_offload_mode(prueth);
-	else
-		icssg_init_emac_mode(prueth);
-
 	memset_io(config, 0, TAS_GATE_MASK_LIST0);
 	icssg_miig_queues_init(prueth, slice);
 
@@ -786,3 +777,27 @@  void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port)
 		writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET);
 }
 EXPORT_SYMBOL_GPL(icssg_set_pvid);
+
+int emac_fdb_flow_id_updated(struct prueth_emac *emac)
+{
+	struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
+	int slice = prueth_emac_slice(emac);
+	struct mgmt_cmd fdb_cmd = { 0 };
+	int ret;
+
+	fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER;
+	fdb_cmd.type   = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW;
+	fdb_cmd.seqnum = ++(emac->prueth->icssg_hwcmdseq);
+	fdb_cmd.param  = 0;
+
+	fdb_cmd.param |= (slice << 4);
+	fdb_cmd.cmd_args[0] = 0;
+
+	ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
+	if (ret)
+		return ret;
+
+	WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
+	return fdb_cmd_rsp.status == 1 ? 0 : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(emac_fdb_flow_id_updated);
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
index 92c2deaa3068..c884e9fa099e 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
@@ -55,6 +55,7 @@  struct icssg_rxq_ctx {
 #define ICSSG_FW_MGMT_FDB_CMD_TYPE	0x03
 #define ICSSG_FW_MGMT_CMD_TYPE		0x04
 #define ICSSG_FW_MGMT_PKT		0x80000000
+#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW	0x05
 
 struct icssg_r30_cmd {
 	u32 cmd[4];
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index c568c84a032b..c675d3d9c789 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -164,11 +164,11 @@  static struct icssg_firmwares icssg_emac_firmwares[] = {
 	}
 };
 
-static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
+static int prueth_emac_start(struct prueth *prueth, int slice)
 {
 	struct icssg_firmwares *firmwares;
 	struct device *dev = prueth->dev;
-	int slice, ret;
+	int ret;
 
 	if (prueth->is_switch_mode)
 		firmwares = icssg_switch_firmwares;
@@ -177,16 +177,6 @@  static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
 	else
 		firmwares = icssg_emac_firmwares;
 
-	slice = prueth_emac_slice(emac);
-	if (slice < 0) {
-		netdev_err(emac->ndev, "invalid port\n");
-		return -EINVAL;
-	}
-
-	ret = icssg_config(prueth, emac, slice);
-	if (ret)
-		return ret;
-
 	ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
 	ret = rproc_boot(prueth->pru[slice]);
 	if (ret) {
@@ -208,7 +198,6 @@  static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
 		goto halt_rtu;
 	}
 
-	emac->fw_running = 1;
 	return 0;
 
 halt_rtu:
@@ -220,6 +209,78 @@  static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
 	return ret;
 }
 
+static int prueth_emac_common_start(struct prueth *prueth)
+{
+	struct prueth_emac *emac;
+	int ret = 0;
+	int slice;
+
+	if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
+		return -EINVAL;
+
+	/* clear SMEM and MSMC settings for all slices */
+	memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
+	memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
+
+	icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
+	icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
+
+	if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
+		icssg_init_fw_offload_mode(prueth);
+	else
+		icssg_init_emac_mode(prueth);
+
+	for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
+		emac = prueth->emac[slice];
+		if (emac) {
+			ret |= icssg_config(prueth, emac, slice);
+			if (ret)
+				return ret;
+		}
+		ret |= prueth_emac_start(prueth, slice);
+	}
+
+	if (ret)
+		return ret;
+	prueth->prus_running = 1;
+
+	emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
+	       prueth->emac[ICSS_SLICE1];
+	ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
+			    emac, IEP_DEFAULT_CYCLE_TIME_NS);
+	if (ret)
+		dev_err(prueth->dev, "Failed to initialize IEP module\n");
+
+	return ret;
+}
+
+static int prueth_emac_common_stop(struct prueth *prueth)
+{
+	struct prueth_emac *emac;
+	int slice;
+
+	if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
+		return -EINVAL;
+
+	icssg_class_disable(prueth->miig_rt, ICSS_SLICE0);
+	icssg_class_disable(prueth->miig_rt, ICSS_SLICE1);
+
+	for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
+		if (prueth->prus_running) {
+			rproc_shutdown(prueth->txpru[slice]);
+			rproc_shutdown(prueth->rtu[slice]);
+			rproc_shutdown(prueth->pru[slice]);
+		}
+	}
+	prueth->prus_running = 0;
+
+	emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
+	       prueth->emac[ICSS_SLICE1];
+	icss_iep_exit(emac->iep);
+
+	return 0;
+}
+
 /* called back by PHY layer if there is change in link state of hw port*/
 static void emac_adjust_link(struct net_device *ndev)
 {
@@ -369,12 +430,13 @@  static void prueth_iep_settime(void *clockops_data, u64 ns)
 {
 	struct icssg_setclock_desc __iomem *sc_descp;
 	struct prueth_emac *emac = clockops_data;
+	struct prueth *prueth = emac->prueth;
 	struct icssg_setclock_desc sc_desc;
 	u64 cyclecount;
 	u32 cycletime;
 	int timeout;
 
-	if (!emac->fw_running)
+	if (!prueth->prus_running)
 		return;
 
 	sc_descp = emac->prueth->shram.va + TIMESYNC_FW_WC_SETCLOCK_DESC_OFFSET;
@@ -543,23 +605,17 @@  static int emac_ndo_open(struct net_device *ndev)
 {
 	struct prueth_emac *emac = netdev_priv(ndev);
 	int ret, i, num_data_chn = emac->tx_ch_num;
+	struct icssg_flow_cfg __iomem *flow_cfg;
 	struct prueth *prueth = emac->prueth;
 	int slice = prueth_emac_slice(emac);
 	struct device *dev = prueth->dev;
 	int max_rx_flows;
 	int rx_flow;
 
-	/* clear SMEM and MSMC settings for all slices */
-	if (!prueth->emacs_initialized) {
-		memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
-		memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
-	}
-
 	/* set h/w MAC as user might have re-configured */
 	ether_addr_copy(emac->mac_addr, ndev->dev_addr);
 
 	icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
-	icssg_class_default(prueth->miig_rt, slice, 0, false);
 	icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
 
 	/* Notify the stack of the actual queue counts. */
@@ -597,18 +653,23 @@  static int emac_ndo_open(struct net_device *ndev)
 		goto cleanup_napi;
 	}
 
-	/* reset and start PRU firmware */
-	ret = prueth_emac_start(prueth, emac);
-	if (ret)
-		goto free_rx_irq;
+	if (!prueth->emacs_initialized) {
+		ret = prueth_emac_common_start(prueth);
+		if (ret)
+			goto stop;
+	}
 
-	icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
+	flow_cfg = emac->dram.va + ICSSG_CONFIG_OFFSET + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
+	writew(emac->rx_flow_id_base, &flow_cfg->rx_base_flow);
+	ret = emac_fdb_flow_id_updated(emac);
 
-	if (!prueth->emacs_initialized) {
-		ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
-				    emac, IEP_DEFAULT_CYCLE_TIME_NS);
+	if (ret) {
+		netdev_err(ndev, "Failed to update Rx Flow ID %d", ret);
+		goto stop;
 	}
 
+	icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
+
 	ret = request_threaded_irq(emac->tx_ts_irq, NULL, prueth_tx_ts_irq,
 				   IRQF_ONESHOT, dev_name(dev), emac);
 	if (ret)
@@ -653,8 +714,7 @@  static int emac_ndo_open(struct net_device *ndev)
 free_tx_ts_irq:
 	free_irq(emac->tx_ts_irq, emac);
 stop:
-	prueth_emac_stop(emac);
-free_rx_irq:
+	prueth_emac_common_stop(prueth);
 	free_irq(emac->rx_chns.irq[rx_flow], emac);
 cleanup_napi:
 	prueth_ndev_del_tx_napi(emac, emac->tx_ch_num);
@@ -689,8 +749,6 @@  static int emac_ndo_stop(struct net_device *ndev)
 	if (ndev->phydev)
 		phy_stop(ndev->phydev);
 
-	icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
-
 	if (emac->prueth->is_hsr_offload_mode)
 		__dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
 	else
@@ -728,11 +786,9 @@  static int emac_ndo_stop(struct net_device *ndev)
 	/* Destroying the queued work in ndo_stop() */
 	cancel_delayed_work_sync(&emac->stats_work);
 
-	if (prueth->emacs_initialized == 1)
-		icss_iep_exit(emac->iep);
-
 	/* stop PRUs */
-	prueth_emac_stop(emac);
+	if (prueth->emacs_initialized == 1)
+		prueth_emac_common_stop(prueth);
 
 	free_irq(emac->tx_ts_irq, emac);
 
@@ -1053,10 +1109,11 @@  static void prueth_offload_fwd_mark_update(struct prueth *prueth)
 	}
 }
 
-static void prueth_emac_restart(struct prueth *prueth)
+static int prueth_emac_restart(struct prueth *prueth)
 {
 	struct prueth_emac *emac0 = prueth->emac[PRUETH_MAC0];
 	struct prueth_emac *emac1 = prueth->emac[PRUETH_MAC1];
+	int ret;
 
 	/* Detach the net_device for both PRUeth ports*/
 	if (netif_running(emac0->ndev))
@@ -1065,36 +1122,46 @@  static void prueth_emac_restart(struct prueth *prueth)
 		netif_device_detach(emac1->ndev);
 
 	/* Disable both PRUeth ports */
-	icssg_set_port_state(emac0, ICSSG_EMAC_PORT_DISABLE);
-	icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE);
+	ret = icssg_set_port_state(emac0, ICSSG_EMAC_PORT_DISABLE);
+	ret |= icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE);
+	if (ret)
+		return ret;
 
 	/* Stop both pru cores for both PRUeth ports*/
-	prueth_emac_stop(emac0);
-	prueth->emacs_initialized--;
-	prueth_emac_stop(emac1);
-	prueth->emacs_initialized--;
+	ret = prueth_emac_common_stop(prueth);
+	if (ret) {
+		dev_err(prueth->dev, "Failed to stop the firmwares");
+		return ret;
+	}
 
 	/* Start both pru cores for both PRUeth ports */
-	prueth_emac_start(prueth, emac0);
-	prueth->emacs_initialized++;
-	prueth_emac_start(prueth, emac1);
-	prueth->emacs_initialized++;
+	ret = prueth_emac_common_start(prueth);
+	if (ret) {
+		dev_err(prueth->dev, "Failed to start the firmwares");
+		return ret;
+	}
 
 	/* Enable forwarding for both PRUeth ports */
-	icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD);
-	icssg_set_port_state(emac1, ICSSG_EMAC_PORT_FORWARD);
+	ret = icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD);
+	ret |= icssg_set_port_state(emac1, ICSSG_EMAC_PORT_FORWARD);
 
 	/* Attache net_device for both PRUeth ports */
 	netif_device_attach(emac0->ndev);
 	netif_device_attach(emac1->ndev);
+
+	return ret;
 }
 
 static void icssg_change_mode(struct prueth *prueth)
 {
 	struct prueth_emac *emac;
-	int mac;
+	int mac, ret;
 
-	prueth_emac_restart(prueth);
+	ret = prueth_emac_restart(prueth);
+	if (ret) {
+		dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+		return;
+	}
 
 	for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
 		emac = prueth->emac[mac];
@@ -1173,13 +1240,18 @@  static void prueth_netdevice_port_unlink(struct net_device *ndev)
 {
 	struct prueth_emac *emac = netdev_priv(ndev);
 	struct prueth *prueth = emac->prueth;
+	int ret;
 
 	prueth->br_members &= ~BIT(emac->port_id);
 
 	if (prueth->is_switch_mode) {
 		prueth->is_switch_mode = false;
 		emac->port_vlan = 0;
-		prueth_emac_restart(prueth);
+		ret = prueth_emac_restart(prueth);
+		if (ret) {
+			dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+			return;
+		}
 	}
 
 	prueth_offload_fwd_mark_update(prueth);
@@ -1228,6 +1300,7 @@  static void prueth_hsr_port_unlink(struct net_device *ndev)
 	struct prueth *prueth = emac->prueth;
 	struct prueth_emac *emac0;
 	struct prueth_emac *emac1;
+	int ret;
 
 	emac0 = prueth->emac[PRUETH_MAC0];
 	emac1 = prueth->emac[PRUETH_MAC1];
@@ -1238,7 +1311,11 @@  static void prueth_hsr_port_unlink(struct net_device *ndev)
 		emac0->port_vlan = 0;
 		emac1->port_vlan = 0;
 		prueth->hsr_dev = NULL;
-		prueth_emac_restart(prueth);
+		ret = prueth_emac_restart(prueth);
+		if (ret) {
+			dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
+			return;
+		}
 		netdev_dbg(ndev, "Disabling HSR Offload mode\n");
 	}
 }
@@ -1413,13 +1490,10 @@  static int prueth_probe(struct platform_device *pdev)
 		prueth->pa_stats = NULL;
 	}
 
-	if (eth0_node) {
+	if (eth0_node || eth1_node) {
 		ret = prueth_get_cores(prueth, ICSS_SLICE0, false);
 		if (ret)
 			goto put_cores;
-	}
-
-	if (eth1_node) {
 		ret = prueth_get_cores(prueth, ICSS_SLICE1, false);
 		if (ret)
 			goto put_cores;
@@ -1618,14 +1692,12 @@  static int prueth_probe(struct platform_device *pdev)
 	pruss_put(prueth->pruss);
 
 put_cores:
-	if (eth1_node) {
-		prueth_put_cores(prueth, ICSS_SLICE1);
-		of_node_put(eth1_node);
-	}
-
-	if (eth0_node) {
+	if (eth0_node || eth1_node) {
 		prueth_put_cores(prueth, ICSS_SLICE0);
 		of_node_put(eth0_node);
+
+		prueth_put_cores(prueth, ICSS_SLICE1);
+		of_node_put(eth1_node);
 	}
 
 	return ret;
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index f5c1d473e9f9..d917945dad68 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -140,7 +140,6 @@  struct prueth_rx_chn {
 /* data for each emac port */
 struct prueth_emac {
 	bool is_sr1;
-	bool fw_running;
 	struct prueth *prueth;
 	struct net_device *ndev;
 	u8 mac_addr[6];
@@ -257,6 +256,7 @@  struct icssg_firmwares {
  * @is_switchmode_supported: indicates platform support for switch mode
  * @switch_id: ID for mapping switch ports to bridge
  * @default_vlan: Default VLAN for host
+ * @prus_running: flag to indicate if all pru cores are running
  */
 struct prueth {
 	struct device *dev;
@@ -298,6 +298,7 @@  struct prueth {
 	int default_vlan;
 	/** @vtbl_lock: Lock for vtbl in shared memory */
 	spinlock_t vtbl_lock;
+	bool prus_running;
 };
 
 struct emac_tx_ts_response {
@@ -361,6 +362,8 @@  int icssg_set_port_state(struct prueth_emac *emac,
 			 enum icssg_port_state_cmd state);
 void icssg_config_set_speed(struct prueth_emac *emac);
 void icssg_config_half_duplex(struct prueth_emac *emac);
+void icssg_init_emac_mode(struct prueth *prueth);
+void icssg_init_fw_offload_mode(struct prueth *prueth);
 
 /* Buffer queue helpers */
 int icssg_queue_pop(struct prueth *prueth, u8 queue);
@@ -377,6 +380,7 @@  void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
 		       u8 untag_mask, bool add);
 u16 icssg_get_pvid(struct prueth_emac *emac);
 void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port);
+int emac_fdb_flow_id_updated(struct prueth_emac *emac);
 #define prueth_napi_to_tx_chn(pnapi) \
 	container_of(pnapi, struct prueth_tx_chn, napi_tx)
 
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
index 5024f0647a0d..a95b0150341a 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
@@ -440,7 +440,6 @@  static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
 		goto halt_pru;
 	}
 
-	emac->fw_running = 1;
 	return 0;
 
 halt_pru: