| Message ID | 20241227-a133-display-support-v1-3-abad35b3579c@linumiz.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for A100/A133 display | expand |
On Fri, Dec 27, 2024 at 06:30:52PM +0530, Parthiban Nallathambi wrote: > Some platforms like A100/A133 also uses pll-com clock as additional > clock source for the display clock. This is not documents both in > user manual and DE 2.0 specification. These changes are mainly from > vendor BSP. > > Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Ditto here, the new clocks are only in the new IP you're adding so this patch needs to get merged. When you merge them, make 2 clocks all that's allowed for the existing devices and 3 clocks for your new one only please. > --- > .../devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml > index 70369bd633e4..3e00905b66ca 100644 > --- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml > +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml > @@ -39,11 +39,13 @@ properties: > items: > - description: Bus Clock > - description: Module Clock > + - description: PLL common clock > > clock-names: > items: > - const: bus > - const: mod > + - const: pll-com > > resets: > maxItems: 1 > > -- > 2.39.5 >
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml index 70369bd633e4..3e00905b66ca 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml @@ -39,11 +39,13 @@ properties: items: - description: Bus Clock - description: Module Clock + - description: PLL common clock clock-names: items: - const: bus - const: mod + - const: pll-com resets: maxItems: 1
Some platforms like A100/A133 also uses pll-com clock as additional clock source for the display clock. This is not documents both in user manual and DE 2.0 specification. These changes are mainly from vendor BSP. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> --- .../devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml | 2 ++ 1 file changed, 2 insertions(+)