diff mbox series

[v7,23/23] clk: imx8mn: support spread spectrum clock generation

Message ID 20241227165719.3902388-24-dario.binacchi@amarulasolutions.com (mailing list archive)
State New
Headers show
Series Support spread spectrum clocking for i.MX8N PLLs | expand

Commit Message

Dario Binacchi Dec. 27, 2024, 4:56 p.m. UTC
Add support for spread spectrum clock generation for the audio, video,
and DRAM PLLs.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v7:
- Add and manage fsl,anatop property as phandle to the anatop node with
  the new patches:
  - 10/23 dt-bindings: clock: imx8m-clock: add phandle to the anatop
  - 11/23 arm64: dts: imx8mm: add phandle to anatop within CCM
  - 12/23 arm64: dts: imx8mn: add phandle to anatop within CCM
  - 13/23 arm64: dts: imx8mp: add phandle to anatop within CCM
  - 14/23 arm64: dts: imx8mq: add phandle to anatop within CCM

Changes in v6:
- Merge patches:
  10/20 dt-bindings: clock: imx8mm: add binding definitions for anatop
  11/20 dt-bindings: clock: imx8mn: add binding definitions for anatop
  12/20 dt-bindings: clock: imx8mp: add binding definitions for anatop
  to
  05/20 dt-bindings: clock: imx8m-anatop: define clocks/clock-names
  now renamed
  05/18 dt-bindings: clock: imx8m-anatop: add oscillators and PLLs
- Split the patch
  15/20 dt-bindings-clock-imx8m-clock-support-spread-spectru.patch
  into
  12/18 dt-bindings: clock: imx8m-clock: add PLLs
  16/18 dt-bindings: clock: imx8m-clock: support spread spectrum clocking

Changes in v5:
- Fix compilation errors.
- Separate driver code from dt-bindings

Changes in v4:
- Add dt-bindings for anatop
- Add anatop driver
- Drop fsl,ssc-clocks from spread spectrum dt-bindings

Changes in v3:
- Patches 1/8 has been added in version 3. The dt-bindings have
  been moved from fsl,imx8m-anatop.yaml to imx8m-clock.yaml. The
  anatop device (fsl,imx8m-anatop.yaml) is indeed more or less a
  syscon, so it represents a memory area accessible by ccm
  (imx8m-clock.yaml) to setup the PLLs.
- Patches {3,5}/8 have been added in version 3.
- Patches {4,6,8}/8 use ccm device node instead of the anatop one.

Changes in v2:
- Add "allOf:" and place it after "required:" block, like in the
  example schema.
- Move the properties definition to the top-level.
- Drop unit types as requested by the "make dt_binding_check" command.

 drivers/clk/imx/clk-imx8mn.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 984331372139..9a04e8138b7d 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -306,6 +306,7 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node, *anp;
 	void __iomem *base;
+	struct imx_pll14xx_ssc ssc_conf;
 	int ret;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
@@ -347,9 +348,21 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_SYS_PLL3_REF_SEL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_SYS_PLL3_REF_SEL);
 
 	hws[IMX8MN_AUDIO_PLL1] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_AUDIO_PLL1);
+	if (!imx_clk_pll14xx_ssc_parse_dt(np, "audio_pll1", &ssc_conf))
+		imx_clk_pll14xx_enable_ssc(hws[IMX8MN_AUDIO_PLL1], &ssc_conf);
+
 	hws[IMX8MN_AUDIO_PLL2] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_AUDIO_PLL2);
+	if (!imx_clk_pll14xx_ssc_parse_dt(np, "audio_pll2", &ssc_conf))
+		imx_clk_pll14xx_enable_ssc(hws[IMX8MN_AUDIO_PLL2], &ssc_conf);
+
 	hws[IMX8MN_VIDEO_PLL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_VIDEO_PLL);
+	if (!imx_clk_pll14xx_ssc_parse_dt(np, "video_pll", &ssc_conf))
+		imx_clk_pll14xx_enable_ssc(hws[IMX8MN_VIDEO_PLL], &ssc_conf);
+
 	hws[IMX8MN_DRAM_PLL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_DRAM_PLL);
+	if (!imx_clk_pll14xx_ssc_parse_dt(np, "dram_pll", &ssc_conf))
+		imx_clk_pll14xx_enable_ssc(hws[IMX8MN_DRAM_PLL], &ssc_conf);
+
 	hws[IMX8MN_GPU_PLL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_GPU_PLL);
 	hws[IMX8MN_M7_ALT_PLL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_M7_ALT_PLL);
 	hws[IMX8MN_ARM_PLL] = imx_anatop_get_clk_hw(anp, IMX8MN_ANATOP_ARM_PLL);