diff mbox series

[v2] arm64: dts: ti: k3-j784s4: use ti,j7200-padconf compatible

Message ID 20241230-j784s4-s2r-pinctrl-v2-1-35039fafe2ca@bootlin.com (mailing list archive)
State New
Headers show
Series [v2] arm64: dts: ti: k3-j784s4: use ti,j7200-padconf compatible | expand

Commit Message

Thomas Richard Dec. 30, 2024, 9:49 a.m. UTC 
Like on j7200, pinctrl contexts shall be saved and restored during
suspend-to-ram.

So use ti,j7200-padconf compatible.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
Second iteration, the series was just rebased to v6.13-rc5.
---
Changes in v2:
- Rebased to v6.13-rc5
- Link to v1: https://lore.kernel.org/r/20241113-j784s4-s2r-pinctrl-v1-1-19aeb62739bc@bootlin.com
---
 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi     |  6 +++---
 .../boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi      | 12 ++++++------
 2 files changed, 9 insertions(+), 9 deletions(-)


---
base-commit: 0fcd4792246bb4fd490af35de8d914c33ccfa65f
change-id: 20241108-j784s4-s2r-pinctrl-643e1ac2014c

Best regards,

Comments

Nishanth Menon Jan. 2, 2025, 4:33 p.m. UTC | #1 
Hi Thomas Richard,

On Mon, 30 Dec 2024 10:49:00 +0100, Thomas Richard wrote:
> Like on j7200, pinctrl contexts shall be saved and restored during
> suspend-to-ram.
> 
> So use ti,j7200-padconf compatible.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-j784s4: use ti,j7200-padconf compatible
      commit: b48888c9c4af15fcaa57076aeff6c48c90809bc5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 7721852c1f68..026f959e68a2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -224,7 +224,7 @@  main_gpio_intr: interrupt-controller@a00000 {
 	};
 
 	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c000 0x00 0x120>;
 		#pinctrl-cells = <1>;
@@ -234,7 +234,7 @@  main_pmx0: pinctrl@11c000 {
 
 	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
 	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x104200 0x00 0x50>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -243,7 +243,7 @@  main_timerio_input: pinctrl@104200 {
 
 	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
 	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x104280 0x00 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index 9638130caece..52e2965a3bf5 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -76,7 +76,7 @@  mcu_ram: sram@41c00000 {
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x034>;
 		#pinctrl-cells = <1>;
@@ -85,7 +85,7 @@  wkup_pmx0: pinctrl@4301c000 {
 	};
 
 	wkup_pmx1: pinctrl@4301c038 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x02c>;
 		#pinctrl-cells = <1>;
@@ -94,7 +94,7 @@  wkup_pmx1: pinctrl@4301c038 {
 	};
 
 	wkup_pmx2: pinctrl@4301c068 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0x120>;
 		#pinctrl-cells = <1>;
@@ -103,7 +103,7 @@  wkup_pmx2: pinctrl@4301c068 {
 	};
 
 	wkup_pmx3: pinctrl@4301c190 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c190 0x00 0x004>;
 		#pinctrl-cells = <1>;
@@ -125,7 +125,7 @@  wkup_gpio_intr: interrupt-controller@42200000 {
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
 	mcu_timerio_input: pinctrl@40f04200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x40f04200 0x00 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -136,7 +136,7 @@  mcu_timerio_input: pinctrl@40f04200 {
 
 	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
 	mcu_timerio_output: pinctrl@40f04280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x40f04280 0x00 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;