diff mbox series

ARM: dts: aspeed: catalina: update catalina dts file

Message ID 20250103-potin-catalina-dts-update-20250102-v1-1-b0b7a523c968@gmail.com (mailing list archive)
State New
Headers show
Series ARM: dts: aspeed: catalina: update catalina dts file | expand

Commit Message

Potin Lai Jan. 3, 2025, 1:42 a.m. UTC 
Update device nodes list below for driver binding.

- Add IOB NIC thermal nodes (TMP421)
  - 24-001f, 26-001f, 36-001f, 38-001f
- Add FIO Remote thermal node (TMP75)
  - 23-001f
- Add Power sensor node (MP5990)
  - 16-0022
- Add main source fan controllers (MAX31790)
  - 18-0021, 18-0027
- Add 2nd source fan controllers (NCT7363)
  - 18-0001, 18-0002
- Add 2nd source HSC nodes (XDP710)
  - 20-0013, 20-001c
- Remove all ina238 nodes, move to userspace
  - 16-0041, 16-0042, 16-0044, 17-0041, 17-0043

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
Updating the catalina system device nodes in dts file.
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 149 +++++++++++++++++----
 1 file changed, 126 insertions(+), 23 deletions(-)


---
base-commit: becaccc292bfbd12df81148746043c5221e49da8
change-id: 20250102-potin-catalina-dts-update-20250102-914b06a4bdba

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 3822bb3c9243..23583665ba12 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -190,6 +190,12 @@  i2c0mux0ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch1: i2c@1 {
 			#address-cells = <1>;
@@ -200,6 +206,12 @@  i2c0mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch3: i2c@3 {
 			#address-cells = <1>;
@@ -361,6 +373,12 @@  i2c0mux3ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch1: i2c@1 {
 			#address-cells = <1>;
@@ -371,6 +389,12 @@  i2c0mux3ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch3: i2c@3 {
 			#address-cells = <1>;
@@ -464,40 +488,105 @@  i2c1mux0ch0: i2c@0 {
 			#size-cells = <0>;
 			reg = <0x0>;
 
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@42 {
-				compatible = "ti,ina238";
-				reg = <0x42>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@44 {
-				compatible = "ti,ina238";
-				reg = <0x44>;
-				shunt-resistor = <500>;
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
 			};
 		};
 		i2c1mux0ch1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x1>;
-
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-			};
-			power-sensor@43 {
-				compatible = "ti,ina238";
-				reg = <0x43>;
-			};
 		};
 		i2c1mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x2>;
+
+			hwmon0: hwmon@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&hwmon0 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&hwmon0 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&hwmon0 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&hwmon0 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&hwmon0 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&hwmon0 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&hwmon0 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&hwmon0 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			hwmon1: hwmon@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&hwmon1 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&hwmon1 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&hwmon1 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&hwmon1 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&hwmon1 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&hwmon1 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&hwmon1 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&hwmon1 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			pwm@21{
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			pwm@27{
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
 		};
 		i2c1mux0ch3: i2c@3 {
 			#address-cells = <1>;
@@ -509,6 +598,14 @@  i2c1mux0ch4: i2c@4 {
 			#size-cells = <0>;
 			reg = <0x4>;
 
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
 			power-monitor@42 {
 				compatible = "lltc,ltc4287";
 				reg = <0x42>;
@@ -580,6 +677,12 @@  temperature-sensor@4b {
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
 		};
 	};
 };