@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/msi.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
@@ -123,6 +124,17 @@
#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)
#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2)
+#define PCIE_RESOURCE_CTRL_REG 0xd2c
+#define PCIE_SYS_CLK_RDY_TIME_MASK GENMASK(7, 0)
+#define PCIE_SYS_CLK_RDY_TIME_TO_10US 0xa
+
+/* PEXTPCFG Registers */
+#define PEXTP_CLOCK_CON_REG 0x20
+#define PEXTP_P0P1_LOWPOWER_CK_SEL BIT(0)
+#define PEXTP_REQ_CTRL_0_REG 0x7c
+#define PEXTP_26M_REQ_FORCE_ON BIT(0)
+#define PEXTP_PCIE26M_BYPASS BIT(4)
+
#define MAX_NUM_PHY_RESETS 3
/* Time in ms needed to complete PCIe reset on EN7581 SoC */
@@ -136,10 +148,14 @@ struct mtk_gen3_pcie;
/**
* struct mtk_gen3_pcie_pdata - differentiate between host generations
* @power_up: pcie power_up callback
+ * @pre_init: initialize settings before link up
+ * @cleanup: cleanup when PCIe power down
* @phy_resets: phy reset lines SoC data.
*/
struct mtk_gen3_pcie_pdata {
int (*power_up)(struct mtk_gen3_pcie *pcie);
+ int (*pre_init)(struct mtk_gen3_pcie *pcie);
+ void (*cleanup)(struct mtk_gen3_pcie *pcie);
struct {
const char *id[MAX_NUM_PHY_RESETS];
int num_resets;
@@ -162,6 +178,7 @@ struct mtk_msi_set {
* struct mtk_gen3_pcie - PCIe port information
* @dev: pointer to PCIe device
* @base: IO mapped register base
+ * @pextpcfg: pextpcfg_ao IO mapped register base
* @reg_base: physical register base
* @mac_reset: MAC reset control
* @phy_resets: PHY reset controllers
@@ -184,6 +201,7 @@ struct mtk_msi_set {
struct mtk_gen3_pcie {
struct device *dev;
void __iomem *base;
+ void __iomem *pextpcfg;
phys_addr_t reg_base;
struct reset_control *mac_reset;
struct reset_control_bulk_data phy_resets[MAX_NUM_PHY_RESETS];
@@ -422,6 +440,13 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
writel_relaxed(val, pcie->base + PCIE_CONF_LINK2_CTL_STS);
}
+ /*
+ * The values of some registers are different in RC and EP mode. Therefore,
+ * call soc->pre_init after the mode change in case it depends on these registers.
+ */
+ if (pcie->soc && pcie->soc->pre_init)
+ pcie->soc->pre_init(pcie);
+
/* Set class code */
val = readl_relaxed(pcie->base + PCIE_PCI_IDS_1);
val &= ~GENMASK(31, 8);
@@ -848,6 +873,7 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
int i, ret, num_resets = pcie->soc->phy_resets.num_resets;
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *node;
struct resource *regs;
u32 num_lanes;
@@ -903,6 +929,18 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
pcie->num_lanes = num_lanes;
}
+ node = of_parse_phandle(dev->of_node, "pextpcfg", 0);
+ if (node) {
+ pcie->pextpcfg = of_iomap(node, 0);
+ of_node_put(node);
+ if (IS_ERR(pcie->pextpcfg)) {
+ dev_err(dev, "failed to get pextpcfg\n");
+ ret = PTR_ERR(pcie->pextpcfg);
+ pcie->pextpcfg = NULL;
+ return ret;
+ }
+ }
+
return 0;
}
@@ -1047,6 +1085,12 @@ static void mtk_pcie_power_down(struct mtk_gen3_pcie *pcie)
phy_power_off(pcie->phy);
phy_exit(pcie->phy);
reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
+
+ if (pcie->soc && pcie->soc->cleanup)
+ pcie->soc->cleanup(pcie);
+
+ if (pcie->pextpcfg)
+ iounmap(pcie->pextpcfg);
}
static int mtk_pcie_get_controller_max_link_speed(struct mtk_gen3_pcie *pcie)
@@ -1277,6 +1321,49 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = {
},
};
+static int mtk_pcie_mt8196_pre_init(struct mtk_gen3_pcie *pcie)
+{
+ u32 val;
+
+ /* Adjust SYS_CLK_RDY_TIME ot 10us to avoid glitch */
+ val = readl_relaxed(pcie->base + PCIE_RESOURCE_CTRL_REG);
+ val &= ~PCIE_SYS_CLK_RDY_TIME_MASK;
+ val |= PCIE_SYS_CLK_RDY_TIME_TO_10US;
+ writel_relaxed(val, pcie->base + PCIE_RESOURCE_CTRL_REG);
+
+ /* Switch to normal clock */
+ val = readl_relaxed(pcie->pextpcfg + PEXTP_CLOCK_CON_REG);
+ val &= ~PEXTP_P0P1_LOWPOWER_CK_SEL;
+ writel_relaxed(val, pcie->pextpcfg + PEXTP_CLOCK_CON_REG);
+
+ /* Force pcie_26m_req and bypass pcie_26m_ack signal */
+ val = readl_relaxed(pcie->pextpcfg + PEXTP_REQ_CTRL_0_REG);
+ val |= (PEXTP_26M_REQ_FORCE_ON | PEXTP_PCIE26M_BYPASS);
+ writel_relaxed(val, pcie->pextpcfg + PEXTP_REQ_CTRL_0_REG);
+
+ return 0;
+}
+
+static void mtk_pcie_mt8196_cleanup(struct mtk_gen3_pcie *pcie)
+{
+ u32 val;
+
+ /* Release pcie_26m_req and pcie_26m_ack signal */
+ val = readl_relaxed(pcie->pextpcfg + PEXTP_REQ_CTRL_0_REG);
+ val &= ~(PEXTP_26M_REQ_FORCE_ON | PEXTP_PCIE26M_BYPASS);
+ writel_relaxed(val, pcie->pextpcfg + PEXTP_REQ_CTRL_0_REG);
+}
+
+static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8196 = {
+ .power_up = mtk_pcie_power_up,
+ .pre_init = mtk_pcie_mt8196_pre_init,
+ .cleanup = mtk_pcie_mt8196_cleanup,
+ .phy_resets = {
+ .id[0] = "phy",
+ .num_resets = 1,
+ },
+};
+
static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = {
.power_up = mtk_pcie_en7581_power_up,
.phy_resets = {
@@ -1290,6 +1377,7 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = {
static const struct of_device_id mtk_pcie_of_match[] = {
{ .compatible = "airoha,en7581-pcie", .data = &mtk_pcie_soc_en7581 },
{ .compatible = "mediatek,mt8192-pcie", .data = &mtk_pcie_soc_mt8192 },
+ { .compatible = "mediatek,mt8196-pcie", .data = &mtk_pcie_soc_mt8196 },
{},
};
MODULE_DEVICE_TABLE(of, mtk_pcie_of_match);
The MT8196 is an ARM platform SoC that has the same PCIe IP as the MT8195. However, it requires additional settings in the pextpcfg registers. Introduce pextpcfg in PCIe driver for these settings. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> --- drivers/pci/controller/pcie-mediatek-gen3.c | 88 +++++++++++++++++++++ 1 file changed, 88 insertions(+)