| Message ID | 20250103060035.30688-5-jianjun.wang@mediatek.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: mediatek-gen3: Add MT8196 support | expand |
Il 03/01/25 07:00, Jianjun Wang ha scritto: > There are some circumstances where the EP device will not respond to > non-posted access from the root port (e.g., MMIO read). In such cases, > the root port will reply with an AXI slave error, which will be treated > as a System Error (SError), causing a kernel panic and preventing us > from obtaining any useful information for further debugging. > > We have added a new bit in the PCIE_AXI_IF_CTRL_REG register to prevent > PCIe AXI0 from replying with a slave error. Setting this bit on an older > platform that does not support this feature will have no effect. > > By preventing AXI0 from replying with a slave error, we can keep the > kernel alive and debug using the information from AER. > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > --- > drivers/pci/controller/pcie-mediatek-gen3.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c > index 4bd3b39eebe2..48f83c2d91f7 100644 > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > @@ -87,6 +87,9 @@ > #define PCIE_LOW_POWER_CTRL_REG 0x194 > #define PCIE_FORCE_DIS_L0S BIT(8) > > +#define PCIE_AXI_IF_CTRL_REG 0x1a8 > +#define PCIE_AXI0_SLV_RESP_MASK BIT(12) > + > #define PCIE_PIPE4_PIE8_REG 0x338 > #define PCIE_K_FINETUNE_MAX GENMASK(5, 0) > #define PCIE_K_FINETUNE_ERR GENMASK(7, 6) > @@ -469,6 +472,15 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) > val |= PCIE_FORCE_DIS_L0S; > writel_relaxed(val, pcie->base + PCIE_LOW_POWER_CTRL_REG); > > + /* > + * Prevent PCIe AXI0 from replying a slave error, as it will cause kernel panic > + * and prevent us from getting useful information. > + * Keep the kernel alive and debug using the information from AER. > + */ Isn't it safer if we set this bit at the beginning of mtk_pcie_startup_port() instead? Cheers, Angelo > + val = readl_relaxed(pcie->base + PCIE_AXI_IF_CTRL_REG); > + val |= PCIE_AXI0_SLV_RESP_MASK; > + writel_relaxed(val, pcie->base + PCIE_AXI_IF_CTRL_REG); > + > /* Disable DVFSRC voltage request */ > val = readl_relaxed(pcie->base + PCIE_MISC_CTRL_REG); > val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
On Fri, Jan 03, 2025 at 02:00:14PM +0800, Jianjun Wang wrote: > There are some circumstances where the EP device will not respond to > non-posted access from the root port (e.g., MMIO read). In such cases, > the root port will reply with an AXI slave error, which will be treated > as a System Error (SError), causing a kernel panic and preventing us > from obtaining any useful information for further debugging. > > We have added a new bit in the PCIE_AXI_IF_CTRL_REG register to prevent > PCIe AXI0 from replying with a slave error. Setting this bit on an older > platform that does not support this feature will have no effect. > > By preventing AXI0 from replying with a slave error, we can keep the > kernel alive and debug using the information from AER. > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > --- > drivers/pci/controller/pcie-mediatek-gen3.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c > index 4bd3b39eebe2..48f83c2d91f7 100644 > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > @@ -87,6 +87,9 @@ > #define PCIE_LOW_POWER_CTRL_REG 0x194 > #define PCIE_FORCE_DIS_L0S BIT(8) > > +#define PCIE_AXI_IF_CTRL_REG 0x1a8 > +#define PCIE_AXI0_SLV_RESP_MASK BIT(12) > + > #define PCIE_PIPE4_PIE8_REG 0x338 > #define PCIE_K_FINETUNE_MAX GENMASK(5, 0) > #define PCIE_K_FINETUNE_ERR GENMASK(7, 6) > @@ -469,6 +472,15 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) > val |= PCIE_FORCE_DIS_L0S; > writel_relaxed(val, pcie->base + PCIE_LOW_POWER_CTRL_REG); > > + /* > + * Prevent PCIe AXI0 from replying a slave error, as it will cause kernel panic > + * and prevent us from getting useful information. > + * Keep the kernel alive and debug using the information from AER. Wrap to fit in 80 columns like the rest of the file Add blank lines between paragraphs. AER is an asynchronous mechanism, so if you disable the SError, whoever issued the MMIO read to the PCIe device will receive some kind of data. I hope/assume that data is ~0 as on other platforms? If so, please confirm this in the comment and commit log. Otherwise, the caller will received corrupted data with no way to know that it's corrupted. > + */ > + val = readl_relaxed(pcie->base + PCIE_AXI_IF_CTRL_REG); > + val |= PCIE_AXI0_SLV_RESP_MASK; > + writel_relaxed(val, pcie->base + PCIE_AXI_IF_CTRL_REG); > + > /* Disable DVFSRC voltage request */ > val = readl_relaxed(pcie->base + PCIE_MISC_CTRL_REG); > val |= PCIE_DISABLE_DVFSRC_VLT_REQ; > -- > 2.46.0 >
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 4bd3b39eebe2..48f83c2d91f7 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -87,6 +87,9 @@ #define PCIE_LOW_POWER_CTRL_REG 0x194 #define PCIE_FORCE_DIS_L0S BIT(8) +#define PCIE_AXI_IF_CTRL_REG 0x1a8 +#define PCIE_AXI0_SLV_RESP_MASK BIT(12) + #define PCIE_PIPE4_PIE8_REG 0x338 #define PCIE_K_FINETUNE_MAX GENMASK(5, 0) #define PCIE_K_FINETUNE_ERR GENMASK(7, 6) @@ -469,6 +472,15 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) val |= PCIE_FORCE_DIS_L0S; writel_relaxed(val, pcie->base + PCIE_LOW_POWER_CTRL_REG); + /* + * Prevent PCIe AXI0 from replying a slave error, as it will cause kernel panic + * and prevent us from getting useful information. + * Keep the kernel alive and debug using the information from AER. + */ + val = readl_relaxed(pcie->base + PCIE_AXI_IF_CTRL_REG); + val |= PCIE_AXI0_SLV_RESP_MASK; + writel_relaxed(val, pcie->base + PCIE_AXI_IF_CTRL_REG); + /* Disable DVFSRC voltage request */ val = readl_relaxed(pcie->base + PCIE_MISC_CTRL_REG); val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
There are some circumstances where the EP device will not respond to non-posted access from the root port (e.g., MMIO read). In such cases, the root port will reply with an AXI slave error, which will be treated as a System Error (SError), causing a kernel panic and preventing us from obtaining any useful information for further debugging. We have added a new bit in the PCIE_AXI_IF_CTRL_REG register to prevent PCIe AXI0 from replying with a slave error. Setting this bit on an older platform that does not support this feature will have no effect. By preventing AXI0 from replying with a slave error, we can keep the kernel alive and debug using the information from AER. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> --- drivers/pci/controller/pcie-mediatek-gen3.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)