diff mbox series

[v2,02/10] arm64: dts: imx8mp-skov: operate CPU at 850 mV by default

Message ID 20250106-skov-dt-updates-v2-2-4504d3f00ecb@pengutronix.de (mailing list archive)
State New
Headers show
Series arm64: dts: imx8mp-skov: flesh out device trees | expand

Commit Message

Ahmad Fatoum Jan. 6, 2025, 4:06 p.m. UTC 
The Skov i.MX8MP boards are passively cooled and heatsink is specced for
continuous operation at 1.2 GHz only. Short bouts of 1.6 GHz are ok,
but these should be invoked intentionally, not as part of
suspend/resume cycles.

Therefore, configure RUN frequency as 850 mV and remove the higher
voltage operating points from those permissible for suspend.

Fixes: 6d382d51d979 ("arm64: dts: freescale: Add SKOV IMX8MP CPU revB board")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  - no change
---
 arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
index ae82166b5c266a96441809958c56b6c8a7ef5e3d..7ae686d37ddaca7a323e2cb1ec7d807c2e3bd3f5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -163,6 +163,19 @@  reg_vsd_3v3: regulator-vsd-3v3 {
 	};
 };
 
+/*
+ * Board is passively cooled and heatsink is specced for continuous operation
+ * at 1.2 GHz only. Short bouts of 1.6 GHz are ok, but these should be done
+ * intentionally, not as part of suspend/resume cycles.
+ */
+&{/opp-table/opp-1600000000} {
+	/delete-property/ opp-suspend;
+};
+
+&{/opp-table/opp-1800000000} {
+	/delete-property/ opp-suspend;
+};
+
 &A53_0 {
 	cpu-supply = <&reg_vdd_arm>;
 };
@@ -253,7 +266,7 @@  reg_vdd_arm: BUCK2 {
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-run-voltage = <850000>;
 				nxp,dvs-standby-voltage = <850000>;
 			};