@@ -145,40 +145,40 @@ additionalProperties:
examples:
- |
- #include <dt-bindings/clock/at91.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/at91.h>
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/at91.h>
- pinctrl@fffff400 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
- ranges = <0xfffff400 0xfffff400 0x600>;
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+ ranges = <0xfffff400 0xfffff400 0x600>;
- atmel,mux-mask = <
- /* A B */
- 0xffffffff 0xffc00c3b /* pioA */
- 0xffffffff 0x7fff3ccf /* pioB */
- 0xffffffff 0x007fffff /* pioC */
- >;
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+ >;
- dbgu {
- pinctrl_dbgu: dbgu-0 {
- atmel,pins =
- <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
- AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
- };
- };
+ dbgu {
+ dbgu-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
- };
- };
+ gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+ };
...
@@ -159,30 +159,30 @@ additionalProperties: false
examples:
- |
- pinctrl@4e000 {
- compatible = "realtek,rtd1315e-pinctrl";
- reg = <0x4e000 0x130>;
+ pinctrl@4e000 {
+ compatible = "realtek,rtd1315e-pinctrl";
+ reg = <0x4e000 0x130>;
- emmc-hs200-pins {
- pins = "emmc_clk",
- "emmc_cmd",
- "emmc_data_0",
- "emmc_data_1",
- "emmc_data_2",
- "emmc_data_3",
- "emmc_data_4",
- "emmc_data_5",
- "emmc_data_6",
- "emmc_data_7";
- function = "emmc";
- realtek,drive-strength-p = <0x2>;
- realtek,drive-strength-n = <0x2>;
- };
+ emmc-hs200-pins {
+ pins = "emmc_clk",
+ "emmc_cmd",
+ "emmc_data_0",
+ "emmc_data_1",
+ "emmc_data_2",
+ "emmc_data_3",
+ "emmc_data_4",
+ "emmc_data_5",
+ "emmc_data_6",
+ "emmc_data_7";
+ function = "emmc";
+ realtek,drive-strength-p = <0x2>;
+ realtek,drive-strength-n = <0x2>;
+ };
- i2c-0-pins {
- pins = "gpio_12",
- "gpio_13";
- function = "i2c0";
- drive-strength = <4>;
- };
- };
+ i2c-0-pins {
+ pins = "gpio_12",
+ "gpio_13";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
@@ -158,30 +158,30 @@ additionalProperties: false
examples:
- |
- pinctrl@4e000 {
- compatible = "realtek,rtd1319d-pinctrl";
- reg = <0x4e000 0x130>;
+ pinctrl@4e000 {
+ compatible = "realtek,rtd1319d-pinctrl";
+ reg = <0x4e000 0x130>;
- emmc-hs200-pins {
- pins = "emmc_clk",
- "emmc_cmd",
- "emmc_data_0",
- "emmc_data_1",
- "emmc_data_2",
- "emmc_data_3",
- "emmc_data_4",
- "emmc_data_5",
- "emmc_data_6",
- "emmc_data_7";
- function = "emmc";
- realtek,drive-strength-p = <0x2>;
- realtek,drive-strength-n = <0x2>;
- };
+ emmc-hs200-pins {
+ pins = "emmc_clk",
+ "emmc_cmd",
+ "emmc_data_0",
+ "emmc_data_1",
+ "emmc_data_2",
+ "emmc_data_3",
+ "emmc_data_4",
+ "emmc_data_5",
+ "emmc_data_6",
+ "emmc_data_7";
+ function = "emmc";
+ realtek,drive-strength-p = <0x2>;
+ realtek,drive-strength-n = <0x2>;
+ };
- i2c-0-pins {
- pins = "gpio_12",
- "gpio_13";
- function = "i2c0";
- drive-strength = <4>;
- };
- };
+ i2c-0-pins {
+ pins = "gpio_12",
+ "gpio_13";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
@@ -157,30 +157,30 @@ additionalProperties: false
examples:
- |
- pinctrl@4e000 {
- compatible = "realtek,rtd1619b-pinctrl";
- reg = <0x4e000 0x130>;
+ pinctrl@4e000 {
+ compatible = "realtek,rtd1619b-pinctrl";
+ reg = <0x4e000 0x130>;
- emmc-hs200-pins {
- pins = "emmc_clk",
- "emmc_cmd",
- "emmc_data_0",
- "emmc_data_1",
- "emmc_data_2",
- "emmc_data_3",
- "emmc_data_4",
- "emmc_data_5",
- "emmc_data_6",
- "emmc_data_7";
- function = "emmc";
- realtek,drive-strength-p = <0x2>;
- realtek,drive-strength-n = <0x2>;
- };
+ emmc-hs200-pins {
+ pins = "emmc_clk",
+ "emmc_cmd",
+ "emmc_data_0",
+ "emmc_data_1",
+ "emmc_data_2",
+ "emmc_data_3",
+ "emmc_data_4",
+ "emmc_data_5",
+ "emmc_data_6",
+ "emmc_data_7";
+ function = "emmc";
+ realtek,drive-strength-p = <0x2>;
+ realtek,drive-strength-n = <0x2>;
+ };
- i2c-0-pins {
- pins = "gpio_12",
- "gpio_13";
- function = "i2c0";
- drive-strength = <4>;
- };
- };
+ i2c-0-pins {
+ pins = "gpio_12",
+ "gpio_13";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
@@ -180,38 +180,31 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/pinctrl-zynq.h>
- pinctrl0: pinctrl@700 {
- compatible = "xlnx,pinctrl-zynq";
- reg = <0x700 0x200>;
- syscon = <&slcr>;
+ pinctrl@700 {
+ compatible = "xlnx,pinctrl-zynq";
+ reg = <0x700 0x200>;
+ syscon = <&slcr>;
- pinctrl_uart1_default: uart1-default {
- mux {
- groups = "uart1_10_grp";
- function = "uart1";
- };
+ uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
- conf {
- groups = "uart1_10_grp";
- slew-rate = <0>;
- power-source = <IO_STANDARD_LVCMOS18>;
- };
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
- conf-rx {
- pins = "MIO49";
- bias-high-impedance;
- };
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
- conf-tx {
- pins = "MIO48";
- bias-disable;
- };
- };
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
};
-
- uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_default>;
- };
-
-...
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../pinctrl/atmel,at91rm9200-pinctrl.yaml | 64 +++++++++---------- .../pinctrl/realtek,rtd1315e-pinctrl.yaml | 50 +++++++-------- .../pinctrl/realtek,rtd1319d-pinctrl.yaml | 50 +++++++-------- .../pinctrl/realtek,rtd1619b-pinctrl.yaml | 50 +++++++-------- .../bindings/pinctrl/xlnx,pinctrl-zynq.yaml | 53 +++++++-------- 5 files changed, 130 insertions(+), 137 deletions(-)