@@ -142,38 +142,38 @@ unevaluatedProperties: false
examples:
- |
thermal-sensor@1f04000 {
- compatible = "allwinner,sun8i-a83t-ths";
- reg = <0x01f04000 0x100>;
- interrupts = <0 31 0>;
- nvmem-cells = <&ths_calibration>;
- nvmem-cell-names = "calibration";
- #thermal-sensor-cells = <1>;
+ compatible = "allwinner,sun8i-a83t-ths";
+ reg = <0x01f04000 0x100>;
+ interrupts = <0 31 0>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
};
- |
thermal-sensor@1c25000 {
- compatible = "allwinner,sun8i-h3-ths";
- reg = <0x01c25000 0x400>;
- clocks = <&ccu 0>, <&ccu 1>;
- clock-names = "bus", "mod";
- resets = <&ccu 2>;
- interrupts = <0 31 0>;
- nvmem-cells = <&ths_calibration>;
- nvmem-cell-names = "calibration";
- #thermal-sensor-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ clocks = <&ccu 0>, <&ccu 1>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 2>;
+ interrupts = <0 31 0>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <0>;
};
- |
thermal-sensor@5070400 {
- compatible = "allwinner,sun50i-h6-ths";
- reg = <0x05070400 0x100>;
- clocks = <&ccu 0>;
- clock-names = "bus";
- resets = <&ccu 2>;
- interrupts = <0 15 0>;
- nvmem-cells = <&ths_calibration>;
- nvmem-cell-names = "calibration";
- #thermal-sensor-cells = <1>;
+ compatible = "allwinner,sun50i-h6-ths";
+ reg = <0x05070400 0x100>;
+ clocks = <&ccu 0>;
+ clock-names = "bus";
+ resets = <&ccu 2>;
+ interrupts = <0 15 0>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
};
...
@@ -80,19 +80,19 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
efuse@21bc000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,imx6sx-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6SX_CLK_OCOTP>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
- tempmon_calib: calib@38 {
- reg = <0x38 4>;
- };
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
- tempmon_temp_grade: temp-grade@20 {
- reg = <0x20 4>;
- };
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
anatop@20c8000 {
@@ -103,12 +103,12 @@ examples:
<0 127 IRQ_TYPE_LEVEL_HIGH>;
tempmon {
- compatible = "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
- #thermal-sensor-cells = <0>;
+ compatible = "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ #thermal-sensor-cells = <0>;
};
};
@@ -63,10 +63,10 @@ examples:
#include <dt-bindings/clock/imx8mm-clock.h>
thermal-sensor@30260000 {
- compatible = "fsl,imx8mm-tmu";
- reg = <0x30260000 0x10000>;
- clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
- #thermal-sensor-cells = <0>;
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
};
...
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../thermal/allwinner,sun8i-a83t-ths.yaml | 48 +++++++++---------- .../bindings/thermal/imx-thermal.yaml | 36 +++++++------- .../bindings/thermal/imx8mm-thermal.yaml | 8 ++-- 3 files changed, 46 insertions(+), 46 deletions(-)