@@ -62,6 +62,33 @@ reg_can_3v3: regulator-can-3v3 {
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
};
+ reg_audio_5v: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_audio_3v3: regulator-audio-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_audio_1v8: regulator-audio-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
sound-wm8960 {
compatible = "fsl,imx-audio-wm8960";
model = "wm8960-audio";
@@ -139,6 +166,11 @@ codec: wm8960@1a {
wlf,gpio-cfg = <1 3>;
clocks = <&clks IMX6UL_CLK_SAI2>;
clock-names = "mclk";
+ AVDD-supply = <®_audio_3v3>;
+ DBVDD-supply = <®_audio_1v8>;
+ DCVDD-supply = <®_audio_1v8>;
+ SPKVDD1-supply = <®_audio_5v>;
+ SPKVDD2-supply = <®_audio_5v>;
};
camera@3c {
WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD2 Add new audio regulators to reflect the schematic and complete missed power supplies. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> --- .../boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+)