diff mbox series

ARM: dts: microchip: sam9x60: Add missing address/size cells for spi nodes

Message ID 20250110144159.379344-1-ada@thorsis.com (mailing list archive)
State New
Headers show
Series ARM: dts: microchip: sam9x60: Add missing address/size cells for spi nodes | expand

Commit Message

Alexander Dahl Jan. 10, 2025, 2:41 p.m. UTC 
Complies with generic spi-controller and atmel,at91rm9200-spi bindings.
Fixes dtc warnings, when actually adding spi target device nodes on
board dts files including this soc dtsi.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
 arch/arm/boot/dts/microchip/sam9x60.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)


base-commit: 9d89551994a430b50c4fffcb1e617a057fa76e20
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 36944e18a329..b8b2c1ddf3f1 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -197,6 +197,8 @@  spi4: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -268,6 +270,8 @@  spi5: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -768,6 +772,8 @@  spi0: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -839,6 +845,8 @@  spi1: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -910,6 +918,8 @@  spi2: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -981,6 +991,8 @@  spi3: spi@400 {
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "spi_clk";
 					dmas = <&dma0