| Message ID | 20250113-potin-catalina-dts-update-20250102-v2-1-1725117fe7a9@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] ARM: dts: aspeed: catalina: Update DTS to support multiple PDB board sources | expand |
On Mon, 13 Jan 2025 14:16:23 +0800, Potin Lai wrote: > This patch updates the Catalina device tree to support different sources > of PDB boards. > > Changes for Main source PDB board > - Thermal Sensor Monitoring: > - Added IOB NIC nodes (TMP421) for thermal sensor monitoring. > - Added FIO remote thermal node (TMP75) for thermal sensor monitoring. > - Fan Monitoring and Control: > - Add fan p12V power sensor node (MP5990) for sensor monitoring. > - Add fan controllers (MAX31790) for fan control and tach monitoring. > > Changes for 2nd source PDB board > - Fan Monitoring and Control: > - Added 2nd source fan controllers (NCT7363) for fan duty control and > tach monitoring. > - Power Monitoring: > - Added 2nd source HSC nodes (XDP710) for power sensor monitoring. > - Address Conflicts: > - Removed all ina238 nodes due to address conflicts. Moved the driver > probe for ina238 to userspace. > > Changes for PDB brick board > - Power Monitoring: > - Add delta brick nodes for power sensor monitoring. > > Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> > --- > Updating the Catalina DTS to support multiple PDB board sources. > --- > Changes in v2: > - Add delta_brick nodes to support PDB brick board > - Link to v1: https://lore.kernel.org/r/20250103-potin-catalina-dts-update-20250102-v1-1-b0b7a523c968@gmail.com > --- > .../dts/aspeed/aspeed-bmc-facebook-catalina.dts | 170 ++++++++++++++++++--- > 1 file changed, 147 insertions(+), 23 deletions(-) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250113-potin-catalina-dts-update-20250102-v2-1-1725117fe7a9@gmail.com: arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/fsi@1e79b000/cfam@0,0/hub@3400/cfam@1,0/i2c@1800: failed to match any schema with compatible: ['ibm,fsi-i2c-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dtb: lpc@1e789000: lpc-snoop@90: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dtb: /ahb/apb/bus@1e78a000/i2c@100/i2c-mux@70/i2c@3/delta_brick@63: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dtb: /ahb/apb/bus@1e78a000/i2c@100/i2c-mux@70/i2c@3/delta_brick@64: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dtb: /ahb/apb/bus@1e78a000/i2c@100/i2c-mux@70/i2c@3/delta_brick@65: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dtb: /ahb/apb/bus@1e78a000/i2c@100/i2c-mux@70/i2c@3/delta_brick@66: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dtb: /ahb/apb/bus@1e78a000/i2c@100/i2c-mux@70/i2c@3/delta_brick@67: failed to match any schema with compatible: ['pmbus'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2500-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts index 3822bb3c9243..49230e6a749e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -190,6 +190,12 @@ i2c0mux0ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + // IOB0 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux0ch1: i2c@1 { #address-cells = <1>; @@ -200,6 +206,12 @@ i2c0mux0ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + // IOB0 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux0ch3: i2c@3 { #address-cells = <1>; @@ -361,6 +373,12 @@ i2c0mux3ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + // IOB1 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux3ch1: i2c@1 { #address-cells = <1>; @@ -371,6 +389,12 @@ i2c0mux3ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + // IOB1 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux3ch3: i2c@3 { #address-cells = <1>; @@ -464,51 +488,145 @@ i2c1mux0ch0: i2c@0 { #size-cells = <0>; reg = <0x0>; - power-sensor@41 { - compatible = "ti,ina238"; - reg = <0x41>; - shunt-resistor = <500>; - }; - power-sensor@42 { - compatible = "ti,ina238"; - reg = <0x42>; - shunt-resistor = <500>; - }; - power-sensor@44 { - compatible = "ti,ina238"; - reg = <0x44>; - shunt-resistor = <500>; + power-sensor@22 { + compatible = "mps,mp5990"; + reg = <0x22>; }; }; i2c1mux0ch1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <0x1>; - - power-sensor@41 { - compatible = "ti,ina238"; - reg = <0x41>; - }; - power-sensor@43 { - compatible = "ti,ina238"; - reg = <0x43>; - }; }; i2c1mux0ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; + + hwmon0: hwmon@1 { + compatible = "nuvoton,nct7363"; + reg = <0x01>; + #pwm-cells = <2>; + + fan-9 { + pwms = <&hwmon0 0 40000>; + tach-ch = /bits/ 8 <0x09>; + }; + fan-11 { + pwms = <&hwmon0 0 40000>; + tach-ch = /bits/ 8 <0x0b>; + }; + fan-10 { + pwms = <&hwmon0 4 40000>; + tach-ch = /bits/ 8 <0x0a>; + }; + fan-13 { + pwms = <&hwmon0 4 40000>; + tach-ch = /bits/ 8 <0x0d>; + }; + fan-15 { + pwms = <&hwmon0 6 40000>; + tach-ch = /bits/ 8 <0x0f>; + }; + fan-1 { + pwms = <&hwmon0 6 40000>; + tach-ch = /bits/ 8 <0x01>; + }; + fan-0 { + pwms = <&hwmon0 10 40000>; + tach-ch = /bits/ 8 <0x00>; + }; + fan-3 { + pwms = <&hwmon0 10 40000>; + tach-ch = /bits/ 8 <0x03>; + }; + }; + hwmon1: hwmon@2 { + compatible = "nuvoton,nct7363"; + reg = <0x02>; + #pwm-cells = <2>; + + fan-9 { + pwms = <&hwmon1 0 40000>; + tach-ch = /bits/ 8 <0x09>; + }; + fan-11 { + pwms = <&hwmon1 0 40000>; + tach-ch = /bits/ 8 <0x0b>; + }; + fan-10 { + pwms = <&hwmon1 4 40000>; + tach-ch = /bits/ 8 <0x0a>; + }; + fan-13 { + pwms = <&hwmon1 4 40000>; + tach-ch = /bits/ 8 <0x0d>; + }; + fan-15 { + pwms = <&hwmon1 6 40000>; + tach-ch = /bits/ 8 <0x0f>; + }; + fan-1 { + pwms = <&hwmon1 6 40000>; + tach-ch = /bits/ 8 <0x01>; + }; + fan-0 { + pwms = <&hwmon1 10 40000>; + tach-ch = /bits/ 8 <0x00>; + }; + fan-3 { + pwms = <&hwmon1 10 40000>; + tach-ch = /bits/ 8 <0x03>; + }; + }; + pwm@21{ + compatible = "maxim,max31790"; + reg = <0x21>; + }; + pwm@27{ + compatible = "maxim,max31790"; + reg = <0x27>; + }; }; i2c1mux0ch3: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <0x3>; + + delta_brick@63 { + compatible = "pmbus"; + reg = <0x63>; + }; + delta_brick@64 { + compatible = "pmbus"; + reg = <0x64>; + }; + delta_brick@65 { + compatible = "pmbus"; + reg = <0x65>; + }; + delta_brick@66 { + compatible = "pmbus"; + reg = <0x66>; + }; + delta_brick@67 { + compatible = "pmbus"; + reg = <0x67>; + }; }; i2c1mux0ch4: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <0x4>; + power-monitor@13 { + compatible = "infineon,xdp710"; + reg = <0x13>; + }; + power-monitor@1c { + compatible = "infineon,xdp710"; + reg = <0x1c>; + }; power-monitor@42 { compatible = "lltc,ltc4287"; reg = <0x42>; @@ -580,6 +698,12 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + // FIO REMOTE TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; }; }; };
This patch updates the Catalina device tree to support different sources of PDB boards. Changes for Main source PDB board - Thermal Sensor Monitoring: - Added IOB NIC nodes (TMP421) for thermal sensor monitoring. - Added FIO remote thermal node (TMP75) for thermal sensor monitoring. - Fan Monitoring and Control: - Add fan p12V power sensor node (MP5990) for sensor monitoring. - Add fan controllers (MAX31790) for fan control and tach monitoring. Changes for 2nd source PDB board - Fan Monitoring and Control: - Added 2nd source fan controllers (NCT7363) for fan duty control and tach monitoring. - Power Monitoring: - Added 2nd source HSC nodes (XDP710) for power sensor monitoring. - Address Conflicts: - Removed all ina238 nodes due to address conflicts. Moved the driver probe for ina238 to userspace. Changes for PDB brick board - Power Monitoring: - Add delta brick nodes for power sensor monitoring. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> --- Updating the Catalina DTS to support multiple PDB board sources. --- Changes in v2: - Add delta_brick nodes to support PDB brick board - Link to v1: https://lore.kernel.org/r/20250103-potin-catalina-dts-update-20250102-v1-1-b0b7a523c968@gmail.com --- .../dts/aspeed/aspeed-bmc-facebook-catalina.dts | 170 ++++++++++++++++++--- 1 file changed, 147 insertions(+), 23 deletions(-) --- base-commit: becaccc292bfbd12df81148746043c5221e49da8 change-id: 20250102-potin-catalina-dts-update-20250102-914b06a4bdba Best regards,