[v2] gpio: Use str_enable_disable-like helpers

Commit Message

Krzysztof Kozlowski Jan. 14, 2025, 7:14 p.m. UTC

Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Reviewed-by: Florian Fainelli <[e-mail]>
Signed-off-by: Krzysztof Kozlowski <[e-mail]>
---

Changes in v2:
1. Many more files changed.
---
 drivers/gpio/gpio-brcmstb.c     | 3 ++-
 drivers/gpio/gpio-crystalcove.c | 3 ++-
 drivers/gpio/gpio-grgpio.c      | 3 ++-
 drivers/gpio/gpio-mvebu.c       | 7 ++++---
 drivers/gpio/gpio-nomadik.c     | 3 ++-
 drivers/gpio/gpio-stmpe.c       | 6 +++---
 drivers/gpio/gpio-wcove.c       | 3 ++-
 drivers/gpio/gpio-wm831x.c      | 3 ++-
 drivers/gpio/gpio-xra1403.c     | 3 ++-
 drivers/gpio/gpiolib.c          | 3 ++-
 10 files changed, 23 insertions(+), 14 deletions(-)

Comments

Doug Berger Jan. 14, 2025, 11:19 p.m. UTC | #1

On 1/14/2025 11:14 AM, Krzysztof Kozlowski wrote:
> Replace ternary (condition ? "enable" : "disable") syntax with helpers
> from string_choices.h because:
> 1. Simple function call with one argument is easier to read.  Ternary
>     operator has three arguments and with wrapping might lead to quite
>     long code.
> 2. Is slightly shorter thus also easier to read.
> 3. It brings uniformity in the text - same string.
> 4. Allows deduping by the linker, which results in a smaller binary
>     file.
> 
> Reviewed-by: Florian Fainelli <[e-mail]>
> Signed-off-by: Krzysztof Kozlowski <[e-mail]>
> ---
> 
> Changes in v2:
> 1. Many more files changed.
> ---
>   drivers/gpio/gpio-brcmstb.c     | 3 ++-
>   drivers/gpio/gpio-crystalcove.c | 3 ++-
>   drivers/gpio/gpio-grgpio.c      | 3 ++-
>   drivers/gpio/gpio-mvebu.c       | 7 ++++---
>   drivers/gpio/gpio-nomadik.c     | 3 ++-
>   drivers/gpio/gpio-stmpe.c       | 6 +++---
>   drivers/gpio/gpio-wcove.c       | 3 ++-
>   drivers/gpio/gpio-wm831x.c      | 3 ++-
>   drivers/gpio/gpio-xra1403.c     | 3 ++-
>   drivers/gpio/gpiolib.c          | 3 ++-
>   10 files changed, 23 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
> index 491b529d25f8..ca3472977431 100644
> --- a/drivers/gpio/gpio-brcmstb.c
> +++ b/drivers/gpio/gpio-brcmstb.c
> @@ -9,6 +9,7 @@
>   #include <linux/irqchip/chained_irq.h>
>   #include <linux/interrupt.h>
>   #include <linux/platform_device.h>
> +#include <linux/string_choices.h>
>   
>   enum gio_reg_index {
>   	GIO_REG_ODEN = 0,
> @@ -224,7 +225,7 @@ static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
>   		ret = disable_irq_wake(priv->parent_wake_irq);
>   	if (ret)
>   		dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
> -				enable ? "enable" : "disable");
> +			str_enable_disable(enable));
>   	return ret;
>   }
>   
For gpio-brcmstb:
Acked-by: Doug Berger <[e-mail]>

Charles Keepax Jan. 15, 2025, 10:24 a.m. UTC | #2

On Tue, Jan 14, 2025 at 08:14:38PM +0100, Krzysztof Kozlowski wrote:
> Replace ternary (condition ? "enable" : "disable") syntax with helpers
> from string_choices.h because:
> 1. Simple function call with one argument is easier to read.  Ternary
>    operator has three arguments and with wrapping might lead to quite
>    long code.
> 2. Is slightly shorter thus also easier to read.
> 3. It brings uniformity in the text - same string.
> 4. Allows deduping by the linker, which results in a smaller binary
>    file.
> 
> Reviewed-by: Florian Fainelli <[e-mail]>
> Signed-off-by: Krzysztof Kozlowski <[e-mail]>
> ---

For the Wolfson bits:

Reviewed-by: Charles Keepax <[e-mail]>

Thanks,
Charles

Patch

diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 491b529d25f8..ca3472977431 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -9,6 +9,7 @@ 
 #include <linux/irqchip/chained_irq.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/string_choices.h>
 
 enum gio_reg_index {
 	GIO_REG_ODEN = 0,
@@ -224,7 +225,7 @@  static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
 		ret = disable_irq_wake(priv->parent_wake_irq);
 	if (ret)
 		dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
-				enable ? "enable" : "disable");
+			str_enable_disable(enable));
 	return ret;
 }
 
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 25db014494a4..56effd0f50c7 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -15,6 +15,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
+#include <linux/string_choices.h>
 #include <linux/types.h>
 
 #define CRYSTALCOVE_GPIO_NUM	16
@@ -317,7 +318,7 @@  static void crystalcove_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip
 		offset = gpio % 8;
 		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
 			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
-			   ctli & 0x1 ? "hi" : "lo",
+			   str_hi_lo(ctli & 0x1),
 			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
 			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
 			   ctlo,
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c
index 169f33c41c59..30a0522ae735 100644
--- a/drivers/gpio/gpio-grgpio.c
+++ b/drivers/gpio/gpio-grgpio.c
@@ -30,6 +30,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/string_choices.h>
 
 #define GRGPIO_MAX_NGPIO 32
 
@@ -438,7 +439,7 @@  static int grgpio_probe(struct platform_device *ofdev)
 	}
 
 	dev_info(dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n",
-		 priv->regs, gc->base, gc->ngpio, priv->domain ? "on" : "off");
+		 priv->regs, gc->base, gc->ngpio, str_on_off(priv->domain));
 
 	return 0;
 }
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 5ffb332e9849..363bad286c32 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -49,6 +49,7 @@ 
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 
 /*
  * GPIO unit register offsets.
@@ -907,14 +908,14 @@  static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 		if (is_out) {
 			seq_printf(s, " out %s %s\n",
-				   out & msk ? "hi" : "lo",
+				   str_hi_lo(out & msk),
 				   blink & msk ? "(blink )" : "");
 			continue;
 		}
 
 		seq_printf(s, " in  %s (act %s) - IRQ",
-			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
-			   in_pol & msk ? "lo" : "hi");
+			   str_hi_lo((data_in ^ in_pol) & msk),
+			   str_lo_hi(in_pol & msk));
 		if (!((edg_msk | lvl_msk) & msk)) {
 			seq_puts(s, " disabled\n");
 			continue;
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 836f1cc760c2..fa19a44943fd 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -30,6 +30,7 @@ 
 #include <linux/reset.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 #include <linux/types.h>
 
 #include <linux/gpio/gpio-nomadik.h>
@@ -430,7 +431,7 @@  void nmk_gpio_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev,
 		seq_printf(s, " gpio-%-3d (%-20.20s) out %s           %s",
 			   gpio,
 			   label ?: "(none)",
-			   data_out ? "hi" : "lo",
+			   str_hi_lo(data_out),
 			   (mode < 0) ? "unknown" : modes[mode]);
 	} else {
 		int irq = chip->to_irq(chip, offset);
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 75a3633ceddb..2e22e1eb7495 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -15,6 +15,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 
 /*
  * These registers are modified under the irq bus lock and cached to avoid
@@ -273,8 +274,7 @@  static void stmpe_dbg_show_one(struct seq_file *s,
 
 	if (dir) {
 		seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
-			   gpio, label ?: "(none)",
-			   val ? "hi" : "lo");
+			   gpio, label ?: "(none)", str_hi_lo(val));
 	} else {
 		u8 edge_det_reg;
 		u8 rise_reg;
@@ -343,7 +343,7 @@  static void stmpe_dbg_show_one(struct seq_file *s,
 
 		seq_printf(s, " gpio-%-3d (%-20.20s) in  %s %13s %13s %25s %25s",
 			   gpio, label ?: "(none)",
-			   val ? "hi" : "lo",
+			   str_hi_lo(val),
 			   edge_det_values[edge_det],
 			   irqen ? "IRQ-enabled" : "IRQ-disabled",
 			   rise_values[rise],
diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index 94ca9d03c094..1ec24f6f9300 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -15,6 +15,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
+#include <linux/string_choices.h>
 
 /*
  * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
@@ -393,7 +394,7 @@  static void wcove_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
 			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
-			   ctli & 0x1 ? "hi" : "lo",
+			   str_hi_lo(ctli & 0x1),
 			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
 			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
 			   ctlo,
diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
index f7d5120ff8f1..61bb83a1e8ae 100644
--- a/drivers/gpio/gpio-wm831x.c
+++ b/drivers/gpio/gpio-wm831x.c
@@ -16,6 +16,7 @@ 
 #include <linux/mfd/core.h>
 #include <linux/platform_device.h>
 #include <linux/seq_file.h>
+#include <linux/string_choices.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
@@ -234,7 +235,7 @@  static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		seq_printf(s, " %s %s %s %s%s\n"
 			   "                                  %s%s (0x%4x)\n",
 			   reg & WM831X_GPN_DIR ? "in" : "out",
-			   wm831x_gpio_get(chip, i) ? "high" : "low",
+			   str_high_low(wm831x_gpio_get(chip, i)),
 			   pull,
 			   powerdomain,
 			   reg & WM831X_GPN_POL ? "" : " inverted",
diff --git a/drivers/gpio/gpio-xra1403.c b/drivers/gpio/gpio-xra1403.c
index dc2710c21c50..842cf875bb92 100644
--- a/drivers/gpio/gpio-xra1403.c
+++ b/drivers/gpio/gpio-xra1403.c
@@ -13,6 +13,7 @@ 
 #include <linux/mutex.h>
 #include <linux/seq_file.h>
 #include <linux/spi/spi.h>
+#include <linux/string_choices.h>
 #include <linux/regmap.h>
 
 /* XRA1403 registers */
@@ -140,7 +141,7 @@  static void xra1403_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		seq_printf(s, " gpio-%-3d (%-12s) %s %s\n",
 			   chip->base + i, label,
 			   (gcr & BIT(i)) ? "in" : "out",
-			   (gsr & BIT(i)) ? "hi" : "lo");
+			   str_hi_lo(gsr & BIT(i)));
 	}
 }
 #else
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 679ed764cb14..be3351583508 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -26,6 +26,7 @@ 
 #include <linux/slab.h>
 #include <linux/srcu.h>
 #include <linux/string.h>
+#include <linux/string_choices.h>
 
 #include <linux/gpio.h>
 #include <linux/gpio/driver.h>
@@ -5007,7 +5008,7 @@  static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 			seq_printf(s, " gpio-%-3u (%-20.20s|%-20.20s) %s %s %s%s\n",
 				   gpio, desc->name ?: "", gpiod_get_label(desc),
 				   is_out ? "out" : "in ",
-				   value >= 0 ? (value ? "hi" : "lo") : "?  ",
+				   value >= 0 ? str_hi_lo(value) : "?  ",
 				   is_irq ? "IRQ " : "",
 				   active_low ? "ACTIVE LOW" : "");
 		} else if (desc->name) {