| Message ID | 20250121084435.2839280-2-beata.michalska@arm.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for AArch64 AMUv1-based average freq | expand |
On 21-01-25, 08:44, Beata Michalska wrote: > Allow arch_freq_get_on_cpu to return an error for cases when retrieving > current CPU frequency is not possible, whether that being due to lack of > required arch support or due to other circumstances when the current > frequency cannot be determined at given point of time. > > Signed-off-by: Beata Michalska <beata.michalska@arm.com> > --- > arch/x86/kernel/cpu/aperfmperf.c | 2 +- > arch/x86/kernel/cpu/proc.c | 7 +++++-- > drivers/cpufreq/cpufreq.c | 8 ++++---- > include/linux/cpufreq.h | 2 +- > 4 files changed, 11 insertions(+), 8 deletions(-) > > diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c > index f642de2ebdac..6cf31a1649c4 100644 > --- a/arch/x86/kernel/cpu/aperfmperf.c > +++ b/arch/x86/kernel/cpu/aperfmperf.c > @@ -498,7 +498,7 @@ void arch_scale_freq_tick(void) > */ > #define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) > > -unsigned int arch_freq_get_on_cpu(int cpu) > +int arch_freq_get_on_cpu(int cpu) > { > struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); > unsigned int seq, freq; > diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c > index 41ed01f46bd9..d79f5845a463 100644 > --- a/arch/x86/kernel/cpu/proc.c > +++ b/arch/x86/kernel/cpu/proc.c > @@ -86,9 +86,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) > seq_printf(m, "microcode\t: 0x%x\n", c->microcode); > > if (cpu_has(c, X86_FEATURE_TSC)) { > - unsigned int freq = arch_freq_get_on_cpu(cpu); > + int freq = arch_freq_get_on_cpu(cpu); > > - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > + if (freq <= 0) > + seq_puts(m, "cpu MHz\t\t: Unknown\n"); > + else > + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > } > > /* Cache size */ > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c > index 418236fef172..6f45684483c4 100644 > --- a/drivers/cpufreq/cpufreq.c > +++ b/drivers/cpufreq/cpufreq.c > @@ -728,18 +728,18 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); > show_one(scaling_min_freq, min); > show_one(scaling_max_freq, max); > > -__weak unsigned int arch_freq_get_on_cpu(int cpu) > +__weak int arch_freq_get_on_cpu(int cpu) > { > - return 0; > + return -EOPNOTSUPP; > } > > static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) > { > ssize_t ret; > - unsigned int freq; > + int freq; > > freq = arch_freq_get_on_cpu(policy->cpu); > - if (freq) > + if (freq > 0) >= ? Since we can return error now, 0 should be considered a valid frequency value ? > ret = sysfs_emit(buf, "%u\n", freq); > else if (cpufreq_driver->setpolicy && cpufreq_driver->get) > ret = sysfs_emit(buf, "%u\n", cpufreq_driver->get(policy->cpu)); > diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h > index 7fe0981a7e46..02fd4746231d 100644 > --- a/include/linux/cpufreq.h > +++ b/include/linux/cpufreq.h > @@ -1184,7 +1184,7 @@ static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_ > } > #endif > > -extern unsigned int arch_freq_get_on_cpu(int cpu); > +extern int arch_freq_get_on_cpu(int cpu); > > #ifndef arch_set_freq_scale > static __always_inline > -- > 2.25.1
On 21-01-2025 14:14, Beata Michalska wrote: > Allow arch_freq_get_on_cpu to return an error for cases when retrieving > current CPU frequency is not possible, whether that being due to lack of > required arch support or due to other circumstances when the current > frequency cannot be determined at given point of time. > > Signed-off-by: Beata Michalska <beata.michalska@arm.com> > --- > arch/x86/kernel/cpu/aperfmperf.c | 2 +- > arch/x86/kernel/cpu/proc.c | 7 +++++-- > drivers/cpufreq/cpufreq.c | 8 ++++---- > include/linux/cpufreq.h | 2 +- > 4 files changed, 11 insertions(+), 8 deletions(-) > > diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c > index f642de2ebdac..6cf31a1649c4 100644 > --- a/arch/x86/kernel/cpu/aperfmperf.c > +++ b/arch/x86/kernel/cpu/aperfmperf.c > @@ -498,7 +498,7 @@ void arch_scale_freq_tick(void) > */ > #define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) > > -unsigned int arch_freq_get_on_cpu(int cpu) > +int arch_freq_get_on_cpu(int cpu) > { > struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); > unsigned int seq, freq; > diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c > index 41ed01f46bd9..d79f5845a463 100644 > --- a/arch/x86/kernel/cpu/proc.c > +++ b/arch/x86/kernel/cpu/proc.c > @@ -86,9 +86,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) > seq_printf(m, "microcode\t: 0x%x\n", c->microcode); > > if (cpu_has(c, X86_FEATURE_TSC)) { > - unsigned int freq = arch_freq_get_on_cpu(cpu); > + int freq = arch_freq_get_on_cpu(cpu); > > - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > + if (freq <= 0) > + seq_puts(m, "cpu MHz\t\t: Unknown\n"); > + else > + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > } > > /* Cache size */ > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c > index 418236fef172..6f45684483c4 100644 > --- a/drivers/cpufreq/cpufreq.c > +++ b/drivers/cpufreq/cpufreq.c > @@ -728,18 +728,18 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); > show_one(scaling_min_freq, min); > show_one(scaling_max_freq, max); > > -__weak unsigned int arch_freq_get_on_cpu(int cpu) > +__weak int arch_freq_get_on_cpu(int cpu) > { > - return 0; > + return -EOPNOTSUPP; > } > > static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) > { > ssize_t ret; > - unsigned int freq; > + int freq; > > freq = arch_freq_get_on_cpu(policy->cpu); > - if (freq) > + if (freq > 0) > ret = sysfs_emit(buf, "%u\n", freq); > else if (cpufreq_driver->setpolicy && cpufreq_driver->get) > ret = sysfs_emit(buf, "%u\n", cpufreq_driver->get(policy->cpu)); > diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h > index 7fe0981a7e46..02fd4746231d 100644 > --- a/include/linux/cpufreq.h > +++ b/include/linux/cpufreq.h > @@ -1184,7 +1184,7 @@ static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_ > } > #endif > > -extern unsigned int arch_freq_get_on_cpu(int cpu); > +extern int arch_freq_get_on_cpu(int cpu); > > #ifndef arch_set_freq_scale > static __always_inline Looks good to me. Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
On Tue, Jan 21, 2025 at 04:17:06PM +0530, Viresh Kumar wrote: > On 21-01-25, 08:44, Beata Michalska wrote: > > Allow arch_freq_get_on_cpu to return an error for cases when retrieving > > current CPU frequency is not possible, whether that being due to lack of > > required arch support or due to other circumstances when the current > > frequency cannot be determined at given point of time. > > > > Signed-off-by: Beata Michalska <beata.michalska@arm.com> > > --- > > arch/x86/kernel/cpu/aperfmperf.c | 2 +- > > arch/x86/kernel/cpu/proc.c | 7 +++++-- > > drivers/cpufreq/cpufreq.c | 8 ++++---- > > include/linux/cpufreq.h | 2 +- > > 4 files changed, 11 insertions(+), 8 deletions(-) > > > > diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c > > index f642de2ebdac..6cf31a1649c4 100644 > > --- a/arch/x86/kernel/cpu/aperfmperf.c > > +++ b/arch/x86/kernel/cpu/aperfmperf.c > > @@ -498,7 +498,7 @@ void arch_scale_freq_tick(void) > > */ > > #define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) > > > > -unsigned int arch_freq_get_on_cpu(int cpu) > > +int arch_freq_get_on_cpu(int cpu) > > { > > struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); > > unsigned int seq, freq; > > diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c > > index 41ed01f46bd9..d79f5845a463 100644 > > --- a/arch/x86/kernel/cpu/proc.c > > +++ b/arch/x86/kernel/cpu/proc.c > > @@ -86,9 +86,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) > > seq_printf(m, "microcode\t: 0x%x\n", c->microcode); > > > > if (cpu_has(c, X86_FEATURE_TSC)) { > > - unsigned int freq = arch_freq_get_on_cpu(cpu); > > + int freq = arch_freq_get_on_cpu(cpu); > > > > - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > > + if (freq <= 0) > > + seq_puts(m, "cpu MHz\t\t: Unknown\n"); > > + else > > + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); > > } > > > > /* Cache size */ > > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c > > index 418236fef172..6f45684483c4 100644 > > --- a/drivers/cpufreq/cpufreq.c > > +++ b/drivers/cpufreq/cpufreq.c > > @@ -728,18 +728,18 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); > > show_one(scaling_min_freq, min); > > show_one(scaling_max_freq, max); > > > > -__weak unsigned int arch_freq_get_on_cpu(int cpu) > > +__weak int arch_freq_get_on_cpu(int cpu) > > { > > - return 0; > > + return -EOPNOTSUPP; > > } > > > > static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) > > { > > ssize_t ret; > > - unsigned int freq; > > + int freq; > > > > freq = arch_freq_get_on_cpu(policy->cpu); > > - if (freq) > > + if (freq > 0) > > >= ? > > Since we can return error now, 0 should be considered a valid > frequency value ? Theoretically speaking - it should, though what would 0 actually represent then ? --- BR Beata > > > ret = sysfs_emit(buf, "%u\n", freq); > > else if (cpufreq_driver->setpolicy && cpufreq_driver->get) > > ret = sysfs_emit(buf, "%u\n", cpufreq_driver->get(policy->cpu)); > > diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h > > index 7fe0981a7e46..02fd4746231d 100644 > > --- a/include/linux/cpufreq.h > > +++ b/include/linux/cpufreq.h > > @@ -1184,7 +1184,7 @@ static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_ > > } > > #endif > > > > -extern unsigned int arch_freq_get_on_cpu(int cpu); > > +extern int arch_freq_get_on_cpu(int cpu); > > > > #ifndef arch_set_freq_scale > > static __always_inline > > -- > > 2.25.1 > > -- > viresh
On Tue, Jan 21, 2025 at 04:14:32PM +0100, Beata Michalska wrote: >On Tue, Jan 21, 2025 at 04:17:06PM +0530, Viresh Kumar wrote: >> On 21-01-25, 08:44, Beata Michalska wrote: >> > Allow arch_freq_get_on_cpu to return an error for cases when retrieving >> > current CPU frequency is not possible, whether that being due to lack of >> > required arch support or due to other circumstances when the current >> > frequency cannot be determined at given point of time. >> > >> > Signed-off-by: Beata Michalska <beata.michalska@arm.com> >> > --- >> > arch/x86/kernel/cpu/aperfmperf.c | 2 +- >> > arch/x86/kernel/cpu/proc.c | 7 +++++-- >> > drivers/cpufreq/cpufreq.c | 8 ++++---- >> > include/linux/cpufreq.h | 2 +- >> > 4 files changed, 11 insertions(+), 8 deletions(-) >> > >> > diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c >> > index f642de2ebdac..6cf31a1649c4 100644 >> > --- a/arch/x86/kernel/cpu/aperfmperf.c >> > +++ b/arch/x86/kernel/cpu/aperfmperf.c >> > @@ -498,7 +498,7 @@ void arch_scale_freq_tick(void) >> > */ >> > #define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) >> > >> > -unsigned int arch_freq_get_on_cpu(int cpu) >> > +int arch_freq_get_on_cpu(int cpu) >> > { >> > struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); >> > unsigned int seq, freq; >> > diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c >> > index 41ed01f46bd9..d79f5845a463 100644 >> > --- a/arch/x86/kernel/cpu/proc.c >> > +++ b/arch/x86/kernel/cpu/proc.c >> > @@ -86,9 +86,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) >> > seq_printf(m, "microcode\t: 0x%x\n", c->microcode); >> > >> > if (cpu_has(c, X86_FEATURE_TSC)) { >> > - unsigned int freq = arch_freq_get_on_cpu(cpu); >> > + int freq = arch_freq_get_on_cpu(cpu); >> > >> > - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); >> > + if (freq <= 0) >> > + seq_puts(m, "cpu MHz\t\t: Unknown\n"); >> > + else >> > + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); >> > } >> > >> > /* Cache size */ >> > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c >> > index 418236fef172..6f45684483c4 100644 >> > --- a/drivers/cpufreq/cpufreq.c >> > +++ b/drivers/cpufreq/cpufreq.c >> > @@ -728,18 +728,18 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); >> > show_one(scaling_min_freq, min); >> > show_one(scaling_max_freq, max); >> > >> > -__weak unsigned int arch_freq_get_on_cpu(int cpu) >> > +__weak int arch_freq_get_on_cpu(int cpu) >> > { >> > - return 0; >> > + return -EOPNOTSUPP; >> > } >> > >> > static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) >> > { >> > ssize_t ret; >> > - unsigned int freq; >> > + int freq; >> > >> > freq = arch_freq_get_on_cpu(policy->cpu); >> > - if (freq) >> > + if (freq > 0) >> >> >= ? >> >> Since we can return error now, 0 should be considered a valid >> frequency value ? >Theoretically speaking - it should, though what would 0 actually >represent then ? I would think the value of 0 would be valid and should be interpreted in a product/architecture specific manner? From silicon behavior, to me only negative frequency values wouldn't make any sense. In Patch 1 of this series we interpret 0 as "Unknown" on a x86 system though. So for the sake of consistency should we consider 0 a valid value everywhere? Regards, Vanshi > >--- >BR >Beata >> >> > ret = sysfs_emit(buf, "%u\n", freq); >> > else if (cpufreq_driver->setpolicy && cpufreq_driver->get) >> > ret = sysfs_emit(buf, "%u\n", cpufreq_driver->get(policy->cpu)); >> > diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h >> > index 7fe0981a7e46..02fd4746231d 100644 >> > --- a/include/linux/cpufreq.h >> > +++ b/include/linux/cpufreq.h >> > @@ -1184,7 +1184,7 @@ static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_ >> > } >> > #endif >> > >> > -extern unsigned int arch_freq_get_on_cpu(int cpu); >> > +extern int arch_freq_get_on_cpu(int cpu); >> > >> > #ifndef arch_set_freq_scale >> > static __always_inline >> > -- >> > 2.25.1 >> >> -- >> viresh
diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c index f642de2ebdac..6cf31a1649c4 100644 --- a/arch/x86/kernel/cpu/aperfmperf.c +++ b/arch/x86/kernel/cpu/aperfmperf.c @@ -498,7 +498,7 @@ void arch_scale_freq_tick(void) */ #define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) -unsigned int arch_freq_get_on_cpu(int cpu) +int arch_freq_get_on_cpu(int cpu) { struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); unsigned int seq, freq; diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 41ed01f46bd9..d79f5845a463 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -86,9 +86,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "microcode\t: 0x%x\n", c->microcode); if (cpu_has(c, X86_FEATURE_TSC)) { - unsigned int freq = arch_freq_get_on_cpu(cpu); + int freq = arch_freq_get_on_cpu(cpu); - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); + if (freq <= 0) + seq_puts(m, "cpu MHz\t\t: Unknown\n"); + else + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, (freq % 1000)); } /* Cache size */ diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 418236fef172..6f45684483c4 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -728,18 +728,18 @@ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); show_one(scaling_min_freq, min); show_one(scaling_max_freq, max); -__weak unsigned int arch_freq_get_on_cpu(int cpu) +__weak int arch_freq_get_on_cpu(int cpu) { - return 0; + return -EOPNOTSUPP; } static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) { ssize_t ret; - unsigned int freq; + int freq; freq = arch_freq_get_on_cpu(policy->cpu); - if (freq) + if (freq > 0) ret = sysfs_emit(buf, "%u\n", freq); else if (cpufreq_driver->setpolicy && cpufreq_driver->get) ret = sysfs_emit(buf, "%u\n", cpufreq_driver->get(policy->cpu)); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 7fe0981a7e46..02fd4746231d 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -1184,7 +1184,7 @@ static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_ } #endif -extern unsigned int arch_freq_get_on_cpu(int cpu); +extern int arch_freq_get_on_cpu(int cpu); #ifndef arch_set_freq_scale static __always_inline
Allow arch_freq_get_on_cpu to return an error for cases when retrieving current CPU frequency is not possible, whether that being due to lack of required arch support or due to other circumstances when the current frequency cannot be determined at given point of time. Signed-off-by: Beata Michalska <beata.michalska@arm.com> --- arch/x86/kernel/cpu/aperfmperf.c | 2 +- arch/x86/kernel/cpu/proc.c | 7 +++++-- drivers/cpufreq/cpufreq.c | 8 ++++---- include/linux/cpufreq.h | 2 +- 4 files changed, 11 insertions(+), 8 deletions(-)