deleted file mode 100644
@@ -1,50 +0,0 @@
-* Atmel SSC driver.
-
-Required properties:
-- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
- - atmel,at91rm9200-ssc: support pdc transfer
- - atmel,at91sam9g45-ssc: support dma transfer
-- reg: Should contain SSC registers location and length
-- interrupts: Should contain SSC interrupt
-- clock-names: tuple listing input clock names.
- Required elements: "pclk"
-- clocks: phandles to input clocks.
-
-
-Required properties for devices compatible with "atmel,at91sam9g45-ssc":
-- dmas: DMA specifier, consisting of a phandle to DMA controller node,
- the memory interface and SSC DMA channel ID (for tx and rx).
- See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
-- dma-names: Must be "tx", "rx".
-
-Optional properties:
- - atmel,clk-from-rk-pin: bool property.
- - When SSC works in slave mode, according to the hardware design, the
- clock can get from TK pin, and also can get from RK pin. So, add
- this parameter to choose where the clock from.
- - By default the clock is from TK pin, if the clock from RK pin, this
- property is needed.
- - #sound-dai-cells: Should contain <0>.
- - This property makes the SSC into an automatically registered DAI.
-
-Examples:
-- PDC transfer:
-ssc0: ssc@fffbc000 {
- compatible = "atmel,at91rm9200-ssc";
- reg = <0xfffbc000 0x4000>;
- interrupts = <14 4 5>;
- clocks = <&ssc0_clk>;
- clock-names = "pclk";
-};
-
-- DMA transfer:
-ssc0: ssc@f0010000 {
- compatible = "atmel,at91sam9g45-ssc";
- reg = <0xf0010000 0x4000>;
- interrupts = <28 4 5>;
- dmas = <&dma0 1 13>,
- <&dma0 1 14>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-};
new file mode 100644
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,at91-ssc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Serial Synchronous Serial (SSC)
+
+maintainers:
+ - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+ The Atmel Synchronous Serial Controller (SSC) provides a versatile
+ synchronous communication link for audio and telecom applications,
+ supporting protocols like I2S, Short Frame Sync, and Long Frame Sync.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91rm9200-ssc
+ - atmel,at91sam9g45-ssc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ atmel,clk-from-rk-pin:
+ description:
+ Specify the clock source for the SSC (Synchronous Serial Controller)
+ when operating in slave mode. By default, the clock is sourced from
+ the TK pin.
+ type: boolean
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91sam9g45-ssc
+ then:
+ required:
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ssc@100000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0x100000 0x4000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(38))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+ clock-names = "pclk";
+ #sound-dai-cells = <0>;
+ };
+
+ ssc@c00000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xc00000 0x4000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ clock-names = "pclk";
+ };
@@ -15633,7 +15633,7 @@ M: Claudiu Beznea <claudiu.beznea@tuxon.dev>
M: Andrei Simion <andrei.simion@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
-F: Documentation/devicetree/bindings/misc/atmel-ssc.txt
+F: Documentation/devicetree/bindings/sound/atmel,at91-ssc.yaml
F: drivers/misc/atmel-ssc.c
F: include/linux/atmel-ssc.h
Convert devicetree binding atmel-ssc.txt to YAML format. Update the documentation supported file for MICROCHIP SSC DRIVER. Signed-off-by: Andrei Simion <andrei.simion@microchip.com> --- v1 -> v2: - squash MAINTAINERS patch - place this yaml in sound directory - reword the commit title - reword the commit message - add #sound-dai-cells const 0 - add required - include ref dai-common.yaml# - fix the logic for the required properties for DMA transfer - update examples by adding #sound-dai-cells = <0> - drop unnecessary description - drop compatible for sam9x7-ssc because is not the intent of the patch --- .../devicetree/bindings/misc/atmel-ssc.txt | 50 --------- .../bindings/sound/atmel,at91-ssc.yaml | 104 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 105 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/misc/atmel-ssc.txt create mode 100644 Documentation/devicetree/bindings/sound/atmel,at91-ssc.yaml base-commit: 00f3246adeeacbda0bd0b303604e46eb59c32e6e